• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.34-42
• /
• 2005

본 논문에서는 비동기 사용자가 존재할 때 OFDMA 상향 시스템의 성능을 주파수 선택적 페이딩 채널 환경에 대해 분석한다. 이를 위해, 각 사용자의 시간오차를 기지국 기준시간에 대한 상대적인 시간오차로 표현하고 상대적인 시간오차에 의한 다중접속간섭을 유도한다. 다중접속간섭은 주파수 선택적 페이딩 채널의 WSSUS (Wide-sense stationary uncorrelated scattering) 채널 모델에 기반하여 유도된다. 성능 분석을 위하여 다중접속간섭을 포함한 평균 신호대 간섭잡음비를 유도하고 최종적으로 평균 심볼에러확률을 표현한다. 유도된 심볼에러확률은 컴퓨터 모의실험을 통하여 분석의 정확도를 확인한다.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.192-204
• /
• 2012

For a severe accident of nuclear power plant, an approach to estimation of the radiological source term using a severe accident code(MELCOR) has been proposed. Although the MELCOR code has a capability to estimate the radiological source term, it has been hardly utilized for the radiological consequence analysis mainly due to a lack of understanding on the relevant function employed in MELCOR and severe accident phenomena. In order to estimate the severe accident source term to be linked with the radiological consequence analysis, this study proposes 4-step procedure: (1) selection of plant condition leading to a severe accident(i.e., accident sequence), (2) analysis of the relevant severe accident code, (3) investigation of the code analysis results and post-processing, and (4) generation of radiological source term information for the consequence analysis. The feasibility study of the present approach to an early containment failure sequence caused by a fast station blackout(SBO) of a reference plant (OPR-1000), showed that while the MELCOR code has an integrated capability for severe accident and source term analysis, it has a large degree of uncertainty in quantifying the radiological source term. Key insights obtained from the present study were: (1) key parameters employed in a typical code for the consequence analysis(i.e., MACCS) could be generated by MELCOR code; (2) the MELOCR code simulation for an assessment of the selected accident sequence has a large degree of uncertainty in determining the accident scenario and severe accident phenomena; and (3) the generation of source term information for the consequence analysis relies on an expert opinion in both areas of severe accident analysis and consequence analysis. Nevertheless, the MELCOR code had a great advantage in estimating the radiological source term such as reflection of the current state of art in the area of severe accident and radiological source term.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1317-1325
• /
• 2018

A generator-grid coupling calculation model is established to study the leading-phase operational capability of a 770 MW jumbo hydro-generator in a Chinese ultra-mega hydropower station. The static and dynamic stability of the generator are analyzed and calculated to obtain stability limits under leading-phase operating conditions. Three-dimensional (3D) time-varying nonlinear moving electromagnetic and temperature field models of the generator end-region are also established and used to determine the magnetic field, loss, and temperature of the end-region under the leading-phase operating condition. The simulation results agree with data measured from the actual 770 MW hydro-generator. This paper provides reliable reference data for the leading-phase operation of a jumbo hydro-generator, which will help to improve in the design and manufacture of future hydro-generators.

• 한국측량학회지
• /
• 제35권3호
• /
• pp.203-210
• /
• 2017

우리나라는 국가 위성기준점 망, 가상기준점 서비스 운영 등 실시간 정밀위치결정을 위한 선진화된 인프라를 구축하고, 지속적으로 고도화해 나가고 있다. 하지만 국가적 인프라 활용에 있어 취득된 공간정보를 가공하여 최종 성과물 도출까지는 많은 과정을 거쳐야하며, 이 과정에서 외산 소프트웨어에 대한 의존성이 높은 편이다. 본 연구에서는 GNSS 측위 데이터 및 현장 측량시스템의 요구사항을 분석하여 실시간 정밀위치 결정과 효과적인 성과물 작성이 가능한 GNSS 현장 측량시스템을 개발하고 활용성을 평가하였다. 연구를 통해 사용자 편의성과 활용성을 향상시킨 실시간 GNSS 현장 측량시스템을 개발하였으며, 시스템을 이용하여 효과적으로 현황측량을 수행하고 성과물을 제작할 수 있었다. 또한 기존 측량시스템과 성과를 비교하여 개발된 GNSS 현장 측량시스템의 활용성을 제시하였다. 연구를 통해 개발된 시스템은 실시간 측량에서 성과물의 생성까지 일련의 기능을 모두 수행할 수 있으며, 외산 소프트웨어의 대체로 경제적 부가가치를 창출할 수 있어 측량업무의 효율성 향상에 기여할 것이다.

• 한국측량학회지
• /
• 제37권5호
• /
• pp.379-388
• /
• 2019

Recently, a technique for acquiring spatial information data using UAV (Unmanned Aerial Vehicle) has been greatly developed. It is a very crucial issue of the GIS (Geographic Information System) mapping system that passes way point in the unmanned airframe and finally measures the accurate image and stable localization to the desired destination. Though positioning using DGPS (Differential Global Navigation System) or RTK-GPS (Real Time Kinematic-GPS) guarantee highly accurate, they are more expensive than the construction of a single positioning system using a single GPS. In the case of a low-priced single GPS system, the stability of the positioning data deteriorates. Therefore, it is necessary to supplement the uncertainty of the absolute position data of the UAV and to improve the accuracy of the current position data economically in the operating state of the UAV. The aim of this study was to present an algorithm enhancing the stability of position data in a single GPS mode of UAV with multiple GPS. First, the arrangement of multiple GPS receivers through the center of gravity of the UAV were examined. Next, MD (Mahalanobis Distance) is applied to detect instantaneous errors of GPS data in advance and eliminate outliers to increase the accuracy of previously collected multiple GPS data. Processing procedure for multiple GPS reception data by applying the center of the triangular method were presented to improve the position accuracy. Second, UAV navigation systems integrated multiple GPS through configuration of the UAV specifications were implemented. Using the unmanned airframe equipped with multiple GPS receivers, GPS data is measured with the TCM (Triangular Center Method). In addition, UAV equipped with multiple GPS were operated in study area and locational accuracy of multiple GPS of UAV with VRS (Virtual Reference Station) GNSS surveying were compared. The result showed that the error factors are compensated, and the error range are reduced, resulting in the reliability of the corrected value. In conclusion, the result in this paper is expected to realize high-precision position estimation at low cost in UAV using multiple low-cost GPS receivers.

• Ocean and Polar Research
• /
• 제43권3호
• /
• pp.99-111
• /
• 2021

Occurrence of epiphytic dinoflagellates (EPDs) in coastal waters off Jeju was first reported in 2011 based on 45 substrate samples from 24 macroalgal species. When re-analyzing, the extreme heterogeneous distribution of whole and genus-specific EPDs was reconfirmed across the sampling stations and substrate macroalgal species, as well as even across substrate samples of the same species. Abundance maximum of an EPD genus (cells g-wwt^-1) at a fixed surface-to-volume ratio (SA/V ratio) of the macroalgal species increased as the SA/V ratio increased up to 500 (cm² cm^-3). However, the abundance maximum of Ostreopsis further increased even in the MG2 (morphological group 2) macroalgae with the SA/V ratios over 500. The number of substrate macroalgal species on the plane of the MG and sampling station was more or less evenly scattered than the average EPD abundance, which was primarily driven by Gambierdiscus and Ostreopsis. Of the total EPD abundance of the five stations, 90.6% were represented by the two most common and abundant genera, Gambierdiscus and Ostreopsis, each accounting for 41.6% and 49.0%. Spatially, 95.9% of the total EPD abundance was found in St. 4 and St. 5, of which St. 4 with higher water temperature had more Ostreopsis spp. (31.8%), and St. 5 with higher salinity had more Gambierdiscus spp. (27.3%). Thus, the environmental transition to favorable T-S condition to MG2, the thin filamentous macroalgal group with very high SA/V ratios, is thus likely to support further success in EPD genera led by Ostreopsis in the coastal waters of Jeju.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권1호
• /
• pp.69-85
• /
• 2019

BeiDou navigation satellite system (BDS) is one of the four main types of global navigation satellite systems. The current system has been widely used by the military and by the aerospace, transportation, and marine fields, among others. However, challenges still remain in the BeiDou system, which requires rapid responses for delay-sensitive devices. A differential positioning algorithm called the data center-based differential positioning (DCDP) method is widely used to avoid the influence of errors. In this method, the positioning information of multiple base stations is uploaded to the data center, and the positioning errors are calculated uniformly by the data center based on the minimum variance or a weighted average algorithm. However, the DCDP method has high delay and overload risk. To solve these problems, this paper introduces edge computing to relieve pressure on the data center. Instead of transmitting the positioning information to the data center, a novel method called edge computing-based differential positioning (ECDP) chooses the nearest reference station to perform edge computing and transmits the difference value to the mobile receiver directly. Simulation results and experiments demonstrate that the performance of the ECDP outperforms that of the DCDP method. The delay of the ECDP method is about 500ms less than that of the DCDP method. Moreover, in the range of allowable burst error, the median of the positioning accuracy of the ECDP method is 0.7923m while that of the DCDP method is 0.8028m.

• 한국항행학회논문지
• /
• 제25권3호
• /
• pp.194-202
• /
• 2021

GNSS (global navigation satellite system)측정치 보정 후에 남아 있는 전리층 잔류 오차에 대해 시뮬레이션 기반의 영향분석(오차 및 서비스 영역 분석 등)을 수행하기 위해서는 위해서는 전리층 잔류 오차에 대한 통계적 모델링이 필수적으로 선행되어야 한다. 본 논문에서는 국내 GNSS 측정치 및 Klobuchar 모델을 활용하여 국내 정상상태 전리층 환경에서의 전리층 잔류 오차에 대한 보수적인 표준편차의 해석적 모델을 도출하였다. 다양한 전리층 활동 상태를 포함하기 위해 미(美) CAT I (category I) LAAS (local-area augmentation system) 전리층 통계치 산출일 중 ROTI (rate-of-tec index) 지수를 활용하여 전리층 활동이 비정상적인 날짜는 제외하고 GNSS 분석 데이터를 구성하였다. GNSS 데이터 처리를 통해 전리층 잔류 오차를 계산하고, 잔류 오차 거동의 특성을 근거하여 지역 시 및 위성 앙각에 따라 통계치를 산출하였다. 마지막으로 전리층 잔류 오차의 확률적 거동을 보수적으로 포함할 수 있는 표준편차값에 대한 해석적 모델을 감쇠 지수 접합을 통해 도출하였다.

• Journal of Ginseng Research
• /
• 제45권4호
• /
• pp.527-534
• /
• 2021

Background: Phenological studies are a prerequisite for accomplishing higher productivity and better crop quality in cultivated plants. However, there are no phenological studies on Panax ginseng that improve its production yield. This study aims to redefine the phenological growth stages of P. ginseng based on the existing Biologische Bundesanstalt, Bundessortenamt und Chemische Industrie (BBCH) scale and proposes a disease control reference. Methods: This study was conducted at the Korea Ginseng Corporation Experiment Station in Gyeonggi province, South Korea. Phenological observations were performed once weekly or twice monthly, based on the developmental stages. The existing BBCH scale with a three-digit code was used to redefine and update P. ginseng's phenological growth codes. Results: The phenological description is divided into eight principal growth stages: three for vegetative growth (perennating bud, aerial shoot, and root development), four for reproductive growth (reproductive organ development, flowering, fruit development, and fruit maturation), and one for senescence according to the extended BBCH scale. A total of 58 secondary growth stages were described within the eight principal growth stages. Under each secondary growth stage, four mesostages are also taken into account, which contains the distinct patterns of the phenological characteristics in ginseng varieties and the process of transplanting seedlings. A practical management program for disease control was also proposed by using the BBCH code and the phenological data proposed in this work. Conclusion: The study introduces an extended BBCH scale for the phenological research of P. ginseng.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.537-544
• /
• 2022

본 논문은 최근 전자전, 레이더, 기지국 및 위성통신분야에서 각광받고 있는 GaN HEMT(Gallium Nitride High Electron Mobility Transistor) die를 이용한 고출력증폭기의 제작에 사용되는 본드 와이어의 용융단선 현상과 원인을 분석하였다. 고출력증폭기의 주요 성능인 최대 출력전력을 얻기 위해서는 최적의 임피던스 정합이 필요하고 정격전류뿐만 아니라 과도전류에 대한 발열을 고려하여 본드 와이어 소재에 부합하는 직경과 가닥수가 정해져야 한다. 특히, GaN과 같이 에너지 밴드 갭이 넓은 화합물반도체는 설계효율이 낮거나 방열이 부족하면 열 저항 증가로 인해 본드 와이어의 용융단선을 촉발하는 현상을 확인하였다. 본 자료는 발열조건에 대한 모의시험을 수행하고, IR현미경 측정을 통한 검증으로 GaN소자를 이용한 응용분야에 참고자료로 활용이 기대된다.