• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.76-83
• /
• 1996

Four natural Quercus stands in Kwangju, Kyonggi-Do, of which ages ranging from 32 to 38 years old, were studied to compare their growth, biomass and net production. Ten $10m{\times}10m$ quadrats were set up and ten sample trees were harvested for dimension analysis in each stand. The largest mean DBH and height were shown by Q. acutissima stand, and followed by Q. variabilis stand, Q. mongolica stand, and Q. dentata stand in descending order. Tree density was the highest at Q. variabilis stand, and followed by Q. dentata stand, Q. mongolica stand, and Q. acutissima stand in descending order. Biomass was the largest at Q. acutissima stand(122.73t/ha), and followed by Q. variabilis stand(87.03t/ha), Q. mongolica stand(72.14t/ha), and Q. dentata stand(38.56t/ha) in descending order. Net production was the greatest at Q. mongolica stand(7.49t/ha/yr.), and followed by Q. variabilis stand(6.47t/ha/yr.), Q. acutissima stand(6.06t/ha/yr.), and Q. dentata stand(3.52t/ha/yr.) in descending order. The highest net assimilation ratio was exhibited by Q. acutissima stand (3.275), and followed by Q. variabilis stand(2.898), Q. mongolica stand(2.888), and Q. dentata stand (1.840) in descending order. The difference in net assimilation ratio and net production among four stands was caused by differences in their leaf biomass. The difference in net production and biomass among four stands was due to that in the distribution of net production among stems, branches and leaves.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.556-566
• /
• 2010

A new kinetic spectrophotometric method is developed for the measurement of Mn(II) in natural water samples. The method is based on the catalytic effect of Mn(II) with the oxidation of Gallocyanin by $KIO_4$ using nitrilotriacetic acid (NTA) as an activation reagent at 620 nm. The optimum conditions obtained are $4.00{\times}1^{-5}\;M$ Gallocyanin, $KIO_4$, $1.00{\times}10^{-4}\;M$ NTA, 0.1 M HAc/NaAc buffer of pH = 3.50, the reaction time of 5 min and the temperature of $30^{\circ}C$. Under the optimum conditions, the proposed method allows the measurement of Mn(II) in a range of $0.1\;-\;4.0\;ng\;mL^{-1}$ and with a detection limit of down to $0.025\;ng\;mL^{-1}$. The recovery efficiency in measuring the standard Mn(II) solution is in a range of 98.5 - 102%, and the RSD is in a range of 0.76 - 1.25%. The newly developed kinetic method has been successfully applied to the measurement of Mn(II) in both some environmental water samples and certified standard reference river water sample, JAC-0031 with satisfying results. Moreover, few cations and anions interfere with the measurement of Mn(II). Compared with the other catalytic-kinetic methods and instrumental methods, the proposed kinetic method shows fairly good selectivity and sensitivity, low cost, cheapness, low detection limit and rapidity. It can easily and successfully be applied to the real water samples with relatively low salt content and complex matrices such as bottled drinking water, cold and hot spring waters, lake water, river water samples.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.99-122
• /
• 2019

According to the recent IDC (International Data Corporation) report, as from 2025, the total volume of data is estimated to reach ten times higher than that of 2016, corresponding to 163 zettabytes. then the main body of generating information is moving more toward corporations than consumers. So-called "the wave of Big-data" is arriving, and the following aftermath affects entire industries and firms, respectively and collectively. Therefore, effective management of vast amounts of data is more important than ever in terms of the firm. However, there have been no previous studies that measure the effects of big data investment, even though there are number of previous studies that quantitatively the effects of IT investment. Therefore, we quantitatively analyze the Big-data investment effects, which assists firm's investment decision making. This study applied the Event Study Methodology, which is based on the efficient market hypothesis as the theoretical basis, to measure the effect of the big data investment of firms on the response of market investors. In addition, five sub-variables were set to analyze this effect in more depth: the contents are firm size classification, industry classification (finance and ICT), investment completion classification, and vendor existence classification. To measure the impact of Big data investment announcements, Data from 91 announcements from 2010 to 2017 were used as data, and the effect of investment was more empirically observed by observing changes in corporate value immediately after the disclosure. This study collected data on Big Data Investment related to Naver 's' News' category, the largest portal site in Korea. In addition, when selecting the target companies, we extracted the disclosures of listed companies in the KOSPI and KOSDAQ market. During the collection process, the search keywords were searched through the keywords 'Big data construction', 'Big data introduction', 'Big data investment', 'Big data order', and 'Big data development'. The results of the empirically proved analysis are as follows. First, we found that the market value of 91 publicly listed firms, who announced Big-data investment, increased by 0.92%. In particular, we can see that the market value of finance firms, non-ICT firms, small-cap firms are significantly increased. This result can be interpreted as the market investors perceive positively the big data investment of the enterprise, allowing market investors to better understand the company's big data investment. Second, statistical demonstration that the market value of financial firms and non - ICT firms increases after Big data investment announcement is proved statistically. Third, this study measured the effect of big data investment by dividing by company size and classified it into the top 30% and the bottom 30% of company size standard (market capitalization) without measuring the median value. To maximize the difference. The analysis showed that the investment effect of small sample companies was greater, and the difference between the two groups was also clear. Fourth, one of the most significant features of this study is that the Big Data Investment announcements are classified and structured according to vendor status. We have shown that the investment effect of a group with vendor involvement (with or without a vendor) is very large, indicating that market investors are very positive about the involvement of big data specialist vendors. Lastly but not least, it is also interesting that market investors are evaluating investment more positively at the time of the Big data Investment announcement, which is scheduled to be built rather than completed. Applying this to the industry, it would be effective for a company to make a disclosure when it decided to invest in big data in terms of increasing the market value. Our study has an academic implication, as prior research looked for the impact of Big-data investment has been nonexistent. This study also has a practical implication in that it can be a practical reference material for business decision makers considering big data investment.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.115-123
• /
• 2019

An analytical method was developed for the determination of fenpropimorph, a morpholine fungicide, in hulled rice, potato, soybean, mandarin and green pepper using QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) sample preparation and LC-MS/MS (liquid chromatography-tandem mass spectrometry). The QuEChERS extraction was performed with acetonitrile followed by addition of anhydrous magnesium sulfate and sodium chloride. After centrifugation, d-SPE (dispersive solid phase extraction) cleanup was conducted using anhydrous magnesium sulfate, primary secondary amine sorbents and graphitized carbon black. The matrix-matched calibration curves were constructed using seven concentration levels, from 0.0025 to 0.25 mg/kg, and their correlation coefficient ($R^2$) of five agricultural products were higher than 0.9899. The limits of detection (LOD) and quantification (LOQ) were 0.001 and 0.0025 mg/kg, respectively, and the limits of quantification for the analytical method were 0.01 mg/kg. Average recoveries spiked at three levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n=5) and were in the range of 90.9~110.5% with associated relative standard deviation values less than 5.7%. As a result of the inter-laboratory validation, the average recoveries between the two laboratories were 88.6~101.4% and the coefficient of variation was also below 15%. All optimized results were satisfied the criteria ranges requested in the Codex guidelines and Food Safety Evaluation Department guidelines. This study could serve as a reference for safety management relative to fenpropimorph residues in imported and domestic agricultural products.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.1
• /
• pp.37-50
• /
• 2023

Background: This study investigated the structural relationships among justice, test anxiety, and school reliability s non-face-to-face tests of dental hygiene students. Methods: A survey was conducted with 267 dental hygiene students. The survey items included general characteristics, opinions on evaluation, the fairness of non-face-to-face tests (distributive, procedural, and interactional justice), school satisfaction, and school reliability. For statistical analysis, independent-sample t-tests, one-way ANOVA, and structural modeling analyses were performed. Results: Among factors that directly affected distributive justice and reliability towards non-face-to-face tests, the higher the interactional justice (β=0.401, p<0.001) and distributive justice (β=0.232, p=0.002) levels, the higher the school satisfaction. The higher the school satisfaction (β=0.606, p<0.001) and procedural justice (β=0.299, p<0.001) levels, the higher the perceived reliability of the school. Factors that indirectly affected school reliability included interactional justice (β=0.243, p=0.010) and distributive justice (β=0.141, p=0.010). Interactional justice (β=0.592, p=0.010) and distributive justice (β=0.208, p=0.010) were the factors affecting school satisfaction. Moreover, factors that influenced school reliability were distributive justice (β=0.56, p=0.010), interactional justice (β=0.332, p=0.010), procedural justice (β=0.229, p=0.010), and distributive justice (β=0.116, p=0.010). Conclusions: Students will trust and be satisfied with schools when schools and professors sufficiently provide information on face-to-face tests and ensure proper procedures to achieve reasonable grades as rewards for exerted time and effort. Furthermore, this study provides a reference base for developing a variety of content for fair, non-face-to-face tests, thereby allowing students to trust their schools.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.528-536
• /
• 2023

In Korea, from January 2023, the Act on Labeling and Advertising of Food was revised to reflect the use-by-date rather than the sell-by-date. Hence, the purpose of this study was to establish a system for calculating the safety factor and determining the recommended use-by-date for each food type, thereby providing a scientific basis for the recommended use-by-date labels. A safety factor calculation technique based on scientific principles was designed through literature review and simulation, and opinions were collected by conducting surveys and discussions including industry and academia, among others. The main considerations in this study were pH, Aw, sterilization, preservatives, packaging for storage improvement, storage temperature, and other external factors. A safety factor of 0.97 was exceptionally applied for frozen products and 1.0 for sterilized products. In addition, a between-sample error value of 0.08 was applied to factors related to product and experimental design. This study suggests that clearly providing a safe use-by-date will help reduce food waste and contribute to carbon neutrality.

• Journal of Nutrition and Health
• /
• v.57 no.3
• /
• pp.292-306
• /
• 2024

Purpose: This study investigated fruit and vegetable intake and associated socio-demographic and dietary factors, and compared the nutritional intake according to the fruit and vegetable intake level among Korean adolescents. Methods: This study was conducted on 1,676 adolescents who participated in the 2016-2019 Korea National Health and Nutrition Examination Survey. The subjects were classified into four groups based on the fruit and vegetable intake recommendations in 2020 Dietary Reference Intakes for Koreans: Application (KDRIs Application): sufficient fruit intake (SF) group, sufficient vegetables intake (SV) group, sufficient fruit and vegetables intake (SFV) group, and not sufficient fruit and vegetable intake (NS) group The nutrient intake per day in each group was compared.. Logistic regression analysis was performed to examine the factors influencing fruit and vegetables intake. Results: In the sample of adolescents surveyed, only 1.40% met the recommended daily intake of fruits and vegetables, while 79.54% fell below the established threshold for adequate consumption. Female adolescents, those with fathers holding university degrees or above, and those who ate breakfast at least three times a week were likelier to have adequate fruit intake. Male adolescents and those from higher-income households were likelier to consume vegetables. Females, those who ate out daily, those from lower-income households, and those who understood food labels were likelier to have adequate fruit and vegetable intake. The daily nutrient intake and intake-to-requirement ratio significantly differed according to the fruit and vegetable intake groups. The NS and SF group had lower ratios for calcium and iron, while the NS group had the lowest vitamin A and C intake. By contrast, the SFV group met almost all daily nutrient requirements, except for calcium and vitamin A. Conclusion: This study highlights the need for nutrition education programs to encourage adolescents to consume adequate amounts of fruits and vegetables.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.

• The Korean Journal of Mycology
• /
• v.4 no.1
• /
• pp.31-44
• /
• 1976

The studies were carried out to examine the effects of supplementation of nutritional substances and physical conditions in substrate on the mycelial growth and yield of fresh sporophores of winter mushroom, Flammulina velutipes(Curt. ex Fr.) Sing. and to obtain further informations on the nutritional requirements of the fungus with reference to improvement of substrate through [analysis of chemical composition of the substrates during the cultivation period. The results obtained are summarized as follows: 1. The best yield of fresh sporophores, 84.4 g per 280 g substrate in a bottle, was obtained from the mixture of poplar sawdust 10 and rice bran 3 by volume when Flammulina velutipes was cultivated on the poplar sawdust supplemented by rice bran, wheat bran, cattle manure and various combinations of these materials as nutrient sources. The substrates of poplar sawdust 10 plus rice bran 3 and 2 or wheat bran 3 with a higher yield of fresh sporophores showed a comparatively higher content of total nitrogen. total sugar, and potassium. 2. The mycelial growth of the fungus was compared on the substrates of poplar sawdust supplemented by the several nutrient sources and poplar sawdust alone. The fastest linear growth occurred on substrates of poplar sawdust alone and poplar sawdust plus cattle manure deficient in sugar and nitrogen sources, but mycelial density was more sparse on the substrates. Also, growth in a solution extracted from these substrates was very meager. 3. In the substrates which varied with bulk density and moisture content optimum bulk density and moisture content for mycelial growth was 0.2g/cc and 72% on a dry weight basis, respectively, but the highest yield of fresh sporophores was obtained at the bulk density of 0.3g/cc and moisture content of 67%. 4. By increasing the ratio of rice bran in poplar sawdust the loss of total weight and ash, content at each stage was increased, and during the cultivation period of 75 days, loss of total weight of the substrates at inoculation was 17.8 to 28.8% and ash content increased about 12%. 5. 11 to 14% of the cellulose and 3 to 4% of the lignin content per original substrate were decreased without a great difference depending of the mixing ratio of rice bran. The soluble glucose concentration in the substrates was increased during the same period. 6. In the process of vegetative and reproductive growth of the fungus upon the substrates, the total nitrogen was increased in quantity per dry weight of sample but was reduced in absolute quantity to a minute extent. There is no great changes in content of organic nitrogen including amino acid nitrogen, and hydrolysable ammonium nitrogen during the vegetative growth period, but occurrence of sporophores resulted in a decrease in the nitrogen content of these forms. On the one hand, by an increase of additive amounts of rice bran, nitrogen contents of these forms were higher and the reduction range during the reproductive growth period became wider. 7. Mycelial growth of the fungus was accelerated in various liquid media supplemented with organic nitrogen sources such as peptone and yeast extract in comparison with addition of inorganic nitrogen sources. Furthermore, mycelial growth was mere vigorous in the media with higher content of organic nitrogen sources.

• Applied Biological Chemistry
• /
• v.10
• /
• pp.1-13
• /
• 1968

Phytin is a salt(mainly calcium and magnesium) of phytic acid and its purity and molecular formula can be determined by assaying the contents of phosporus, calcium and magnesium in phytin. In order to devise a new method for the quantitative analysis of the three elements in phytin, the chelatometric method was developed as follows: 1) As the pretreatment for phytin analysis, it was ashfied st $550{\sim}600^{\circ}C$ in the presence of concentrated nitric acid. This dry process is more accurate than the wet process. 2) Phosphorus, calcium and megnesium were analyzed by the conventional and the new method described here, for the phytin sample decomposed by the dry process. The ashfied phytin solution in hydrochloric acid was partitioned into cation and anion fractions by means of a ration exchange resin. A portion of the ration fraction was adjusted to pH 7.0, followed by readjustment to pH 10 and titrated with standard EDTA solution using the BT [Eriochrome black T] indicator to obtain the combined value of calcium and magnesium. Another portion of the ration fraction was made to pH 7.0, and a small volume of standard EDTA solution was added to it. pH was adjusted to $12{\sim}13$ with 8 N KOH and it was titrate by a standard EDTA solution in the presence of N-N[2-Hydroxy-1-(2-hydroxy-4-sulfo-1-naphytate)-3-naphthoic acid] diluted powder indicator in order to obtain the calcium content. Magnesium content was calculated from the difference between the two values. From the anion fraction the magnesium ammonium phosphate precipitate was obtained. The precipitate was dissolved in hydrochloric acid, and a standard EDTA solution was added to it. The solution was adjusted to pH 7.0 and then readjusted to pH 10.0 by a buffer solution and titrated with a standard magnesium sulfate solution in the presence of BT indicator to obtain the phosphorus content. The analytical data for phosphorus, calcium and magnesium were 98.9%, 97.1% and 99.1% respectively, in reference to the theoretical values for the formula $C_6H_6O_{24}P_6Mg_4CaNa_2{\cdot}5H_2O$. Statical analysis indicated a good coincidence of the theoretical and experimental values. On the other hand, the observed values for the three elements by the conventional method were 92.4%, 86.8% and 93.8%, respectively, revealing a remarkable difference from the theoretical. 3) When sodium phytate was admixed with starch and subjected to the analysis of phosphorus, calcium and magnesium by the chelatometric method, their recovery was almost 100% 4) In order to confirm the accuracy of this method, phytic acid was reacted with calcium chloride and magnesium chloride in the molar ratio of phytic: calcium chloride: magnesium chloride=1 : 5 : 20 to obtain sodium phytate containing one calcium atom and four magnesium atoms per molecule of sodium phytate. The analytical data for phosporus, calcium and magnesium were coincident with those as determine d by the aforementioned method. The new method employing the dry process, ion exchange resin and chelatometric assay of phosphorus, calcium and magnesium is considered accurate and rapid for the determination of phytin.