• Tribology and Lubricants
• /
• 제28권4호
• /
• pp.173-177
• /
• 2012

We used contact resonance force microscopy (CRFM) technique to determine the quantitative elastic properties of multiple materials integrated on the sub micrometer scale. The CRFM approach measures the frequencies of an AFM cantilever's first two flexural resonances while in contact with a material. The plain strain modulus of an unknown or test material can be obtained by comparing the resonant spectrum of the test material to that of a reference material. In this study we examined the following bumping materials for flip chip by using copper electrode as a reference material: NiP, Solder (Sn-Au-Cu alloy) and under filled epoxy. Data were analyzed by conventional beam dynamics and contact dynamics. The results showed a good agreement (~15% difference) with corresponding values determined by nanoindentaion. These results provide insight into the use of CRFM methods to attain reliable and accurate measurements of elastic properties of materials on the nanoscale.

• 대한화학회지
• /
• 제38권10호
• /
• pp.726-733
• /
• 1994

대기부유분진(air particulate material)중에 존재하는 다환방향족탄화수소(polycyclic aromatic hydrocarbons, PAH)를 신속하고 정확하게 분석하기 위하여 대기부유분진 시료를 10ml의 초임계유체($N_2O$ )로 30분간 추출 후 별도의 전처리와 농축과정 없이 GC/MS에서 분석하여 분석시간과 분석과정을 단축 및 단순화하였다. 시료로서 NBS 대기부유분진 인증표준기준물질(certified particulate reference material, CRM)1649와 서울의 도심에서 채취한 대기부유분진 시료를 이용하여 기존의 추출법 및 분석방법과 비교하였다. 그 결과 본 분석방법은 기존의 분석법에 비해 회수율은 상대적으로 작았으나 재현성이 좋았으며 분석과정이 간단하고 분석시간이 현저히 단축됨을 알 수 있었다.

• 전기화학회지
• /
• 제24권3호
• /
• pp.42-51
• /
• 2021

리튬/유황 전지 반응에서 리튬-폴리설파이드(Lithium polysulfide)는 사이클이 반복될수록 전해액에 해리되어 전지 수명을 저하시키는 큰 원인으로 작용한다. 액체 상태인 리튬-폴리설파이드가 전해액에 용해되지 않도록 유황을 담지하고 리튬-폴리설파이드의 흡착을 유도, 추가로 전도도까지 높일 수 있는 비표면적이 큰 다공성 탄소를 모색했다. 본 논문에서는 비표면적이 큰 다공성 탄소 구체를 얻기 위해 추가로 KOH 처리를 통해 1939 m²/g의 탄소 구체를 2200 m²/g으로 높였다. 또한, 유황과의 열처리를 통해 75wt%의 유황이 함유된 탄소 유황 화합물을 만들어 양극재료 사용가능성에 대한 물질 분석을 진행했다. Reference (622; 유황: 60%, 도전재: 20%, 바인더: 20%) 파우치 셀과 75 wt%의 탄소 유황 화합물을 이용하여 만든 파우치 셀의 전기화학적 특성 분석을 진행하였다. 이는 50 사이클 기준으로 Reference 대비 20%의 수명 증가와 10%의율 특성 향상을 보였다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1754-1759
• /
• 2022

The activity of gamma-ray emitting nuclides is calculated assuming that each gamma-ray is detected individually; thus, the magnitude of the coincidence summing signal must be considered during activity calculations. Here, the correction factor for the coincidence summing effect was calculated, and the detection efficiencies of two HPGe detectors were compared. The CANBERRA Inc. GC4018 high-purity Ge detector provided an estimate for the peak-to-total ratio using a point source to determine the coincidence summing correction factor. The ORTEC Inc. GEM60 high-purity Ge detector uses EFFTRAN in LVis to obtain the parameters of the detector and source model and the gamma-gamma and gamma-X match estimates, in order to determine the coincidence summing correction factor. Nuclide analyses, radioactivity comparisons, and analyses of reference material samples were performed utilizing certified reference materials to accurately determine the detection efficiencies. For both Co-60 and Y-88, the detection efficiency for a point source increased by an average of at least 12-13%, whereas the detection efficiency determined using LVis increased by an average of at least 13-15%. The calculated radioactivity values of the certified reference material and reference material samples were accurate to within 3% and 6% of the measured values, respectively.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.111-118
• /
• 2019

Recently, a variety of special concrete structures have been designed in domestic and overseas construction markets and more advanced construction technology is required. Therefore, it is necessary to secure quantitative construction technology. For this purpose, it is essential to develop a standard reference material having a constant flow performance and quality to evaluate quantitative performance. On the other hand, the flowability of the concrete is greatly influenced by the flowability of the cement paste. Also, in consideration of design strength and workability, mix design is carried out at various mixing ratios according to the purpose of the site. Therefore, in this study, based on the derived components of standard reference materials for cement paste, we suggested mixing ratio of standard reference materials that can uniformly simulate the flow characteristics of cement paste according to W/C. As a result, it was found that the yield stress was determined by the ratio of water and glycerol but plastic viscosity was controled by limestone content. Finally, the ratio of standard reference materials to simulate the rheological range of cement paste by W/C was suggested.

• 한국항해항만학회지
• /
• 제34권1호
• /
• pp.21-26
• /
• 2010

본 논문은 패치 안테나의 급전선 주위에 원통형 자성체을 이용하여 안테나의 고이득 및 광대역 안테나 설계법에 대해서 기술한다. 안테나의 고이득 설계를 위해서 급전선 주위에 생기는 자기장과 원통형 자성체 주위에 생기는 자기장을 결합시켜 급전선에 강한 전류를 유도시키는 방법을 사용하였고, 안테나의 광대역 설계를 위해서 shorting 스티브를 추가한 PIFA의 원리를 적용하여 설계하였다. 단일 원통형 자성체의 경우, 참고 안테나와 비교하여 3.96 dB 이득이 증가하였으나 대역폭 특성은 개선되지 않았다. 이중 원통형 자성체의 경우, 참고 안테나와 비교하여 이득은 약 10 dB 개선되었으며, -10 dB 이하 대역폭은 700 MHz(50 MHz~750 MHz)로써 광대역 특성을 가지는 안테나를 설계하였다.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.1043-1049
• /
• 2008

본 논문에서는 Navier 방법을 이용한 점진기능재료 판의 정적 응답과 고유진동수 그리고 좌굴하중을 연구하였다. S 형상 함수를 이용한 세라믹과 금속의 체적요소의 변화에 따른 점진기능재료 판의 고유치 문제를 연구하였다. 점진기능재료 판의 면내 강성, 휨 강성 및 전단 강성의 수식은 등질 요소보다 복잡한 재료의 성질들로 결합되어 있다. 본 연구의 결과를 검증하기 위해 고전적 이론에 의한 직사각형 판의 결과를 제시하였다. 적층복합 구조 및 S 형상 점진기능재료 구조의 다양한 예제를 제시하였다. 해석결과는 참고문헌의 결고들과 잘 일치함을 알 수 있었다.

• 한국지진공학회논문집
• /
• 제17권4호
• /
• pp.159-169
• /
• 2013

The purpose of this study is to investigate the inelastic behavior of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and to provide the details and reference data. Among the numerous parameters, this study concentrates on the shape of the section, the reinforcement details, the diameter of the transverse reinforcement and loading types. Eighteen column section specimens were tested under quasi-static monotonic loading. In this study, the computer program RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology) was used. A modified lateral confining effect model was adopted for the hollow bridge column sections. This study documents the testing of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and presents conclusions based on the experimental and analytical findings.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.429-434
• /
• 2019

The gonads are directly affected by radiation exposure during radiography of the pelvis, abdomen, and spine. Exposure of the gonads to radiation can cause genetic mutations and can result in the occurrence of malignant tumors. In this study, we created three types of shielding material shapes for shielding of the ovaries, which are the gonads of female during radiography of the pelvis, and comparative evaluations using shadow shielding methods. The source surface distance(SSD) was 100 cm and the field size was 42 cm × 43 cm. The three types of shielding material shapes(type 1, 2 and 3) were assessed and the entrance surface dose in the ovaries were measured. The thickness of the shielding material was expanded from 0.3 mm to 2.4 mm and after five repetitions, radiation values were measured and mean values were calculated. The mean dose were 3.09 mGy for type 1, 3.54 mGy for type 2, and 3.19 mGy for type 3, indicating that the measurements were the lowest for type 1. When an additional filter of 0.2 Cu + 1 Al was used, the dose were 3.72 mGy for type 1, 5.43 mGy for type 2, and 4.05 mGy for type 3, indicating that the measurements were the lowest for type 1. The results show that, even if the shielding material is not thick, in other words, even with a thickness of 2.94 mGy for the SN 3(0.9 mm) of type 1, shielding can be achieved, with a patient dose lower than the diagnostic reference level(3.42 mGy). Additionally, among the three types of shielding material, the type 1 appeared to be the most appropriate shielding material. It is thought that the use of shielding material could reduce the risk factors for stochastic effects or critical effects of ionizing radiation during pelvic or lumbar radiography.

• 천문학회보
• /
• 제46권2호
• /
• pp.76.3-77
• /
• 2021

GMT secondary mirror system consists of 7 segmented adaptive mirrors. Each segment consists of a thin shell mirror, actuators and a reference body. The thin shell has a few millimeters of thickness so that it can be easily bent by push and pull force of actuators to compensate the wavefront disturbance of light due to air turbulence. The one end of actuator is supported by the reference body and the other end is adapted to this thin shell. One of critical role of the reference body is to provide the reference surface for the thin shell actuators. Therefore, the reference body is one of key components to succeed in development of GMT ASM. Recently, Korea Research Institute of Standards and Science (KRISS) and University of Arizona (UA) has signed a contract that they will cooperate to develop the first set of off-axis reference body for GMT ASM. This project started August 2021 and will be finished in Dec. 2022. The reference body has total 675 holes to accommodate actuators and 144 pockets for lightweighting. The rear surface has a curved rib shape with radius of curvature of 4387 mm with offset of 128.32mm. Since this reference body is placed just above the thin shell so that the front surface shape needs to be close to that of thin shell. The front surface has a concave off-axis asphere, of which radius of curvature is 4165.99 mm and off-axis distance is about 1088 mm. The material is Zerodur CTE class 1 (CTE=0.05 ppm/oC) from SCHOTT. All the actuator holes and pockets are machined normal to the front surface. It is a very complex challenging optical elements that involves sophisticated machining process as well as accurate metrology. After finishing the fabrication of reference body in KRISS, it will be shipped to UA for final touches and finally sent to Adoptica in Italy, in early 2023. This paper presets the development plan for the GMT ASM Reference Body and relevant fabrication and metrology plans.