• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.676-678
• /
• 1995

The Paper describes a dc/nc power comparator for measurement of power. Based on a thermal principle, the instrument performs ac-dc transfer and absolute power and energy measurements in the range of currents from 0 to 5 A, voltages from 60 to 240 V, power factors from 0 to 1 and frequencies from 50 to 1000 Hz. The ac-dc transfer accuracy is better than 20 ppm at unity power factor and better than 50 ppm at 0.5 power factor.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.414-417
• /
• 2001

SRG (Switched Reluctance Generator) have many advantages such as high efficiency, low cost, high-speed capability and robustness compared with characteristics of other machines. However, the control methods that have been adopted for SRGs are complicated. This paper proposes a simple control method using PID controller that only controls turn-off angles while keeping turn-on angles of SRG constant. The linear characteristics between the generated current and the turn-off angle can be used to control the turn-off angle for load variations. Since the reference current for generation can be produced from an error between the reference and the real voltage, it can be controlled to keep the output voltage constant. The proposed control method enhances the robustness of this system and simplifies the hardware and software by using only the voltage and speed sensors. The proposed method is verified by experimental results.

• Journal of Distribution Science
• /
• v.13 no.2
• /
• pp.15-24
• /
• 2015

Purpose - Foreign exchange risk control is in an important component in the international supply chain management. This study shows the importance of the reference period in forecasting future exchange rates with a specific illustration of KIKO currency option contracts, and suggests feasible preventive measures. Research design, data, and methodology - Using monthly Won-Dollar exchange rate data for January 1995~July 2007, I evaluate the statistical characteristics of the exchange rate for two sub-periods; 1) a shorter period after the East Asian financial crisis and 2) a longer period including the financial crisis. The key instrument of analysis is the basic normal distribution theory. Results - The difference in the reference period could lead to an unexpected development in contract implementation and a consequent financial loss. We may avoid foreign exchange loss by using derivatives such as forwards or currency options. Conclusions - We should consider not only level values but also the volatilities of financial variables in making a binding financial contract. Appropriate measures may differ depending on the specific supply chain pattern. We may extend the study with surveys on actual risk measures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.2
• /
• pp.120-130
• /
• 2016

In general, a series of ship steering motions is composed of a combination of translational motions and rotational motions of the ship. In particular, a series of rotational motions frequently occurs in narrow areas such as ports and canal zones. In this paper, a method was suggested for composing an integrated control algorithm based on the jog dial as a command instrument for rotational motion control. In order to realize the rotational motions, several algorithms were suggested for generating rotational commands, for selecting motion variables, for choosing reference input values for the motion variables, for computing required accelerations and thrusts, and for allocating thrusts to actuators. A simulation program was compiled to execute simulations for three rotational motions. Finally, the effectiveness of the suggested method was verified by analyzing the simulation results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.61-72
• /
• 1996

In this paper, the driver seat comfort of eight automobiles was studied. The joint angles and anthropometric data of eleven subjects sitting on the seating buck were investigated using the instrument devices such as scale, goniometer, vernier calipers, protractor, Martin set. The joint angles of the most comfort posture were found by experiment and compared with previous studies. The anthropometric data of Korean(1992 year surveys) and American(1970∼1974 year) were applied to evaluate the driver seat layout of Korean automobile. The joint angles of the most comfort posture for eleven subjects were obtained with experimental results. The joint angles were agreed with reference angles. The driver seat layout was not suited to seat length and acceleratorseatpan forward distance in 5 percentiles female, pedal separation and seatpan-roof height in 95 percentiles male. Korean automobiles were not suited to seatpan length and steering wheelseatpan clearance, floor-roof height for American 95 percentiles male. The driver anthropometric dimensions were more suitable to middle size than small size automobiles.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.77-86
• /
• 2005

This paper is about the development of Automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, The punching accuracy is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used fur the sake of cost down instead of using high quality vision systems for the factory automation. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.981-984
• /
• 2004

This paper is about the development of Automatic FPC punching instrument. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. Test algorithm shows good results to the designed automatic punching system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.148-157
• /
• 2016

In this study, the notion of payment intention price was introduced and examined in relation with self-image congruence, clothing preference and two types of reference price: expected price and fair price. One hundred samples of female collegiate students participated in the group survey and responded to the instrument including variables of clothing image evaluation, clothing preference, reference price, payment intention price toward a one-piece dress as the stimulus, and ideal self-image perception. Descriptive statistics, correlations, and regressions were applied on data analysis. The results were as follow. Payment intention price was determined by clothing preference and fair price, and the explaining power of fair price was greater than clothing preference. One confirmatory path was observed that self-image congruence effects clothing preference, and then clothing preference effects payment intention price. The other confirmatory path was from expected price to fair price and fair price to payment intention price.

• Korean Journal of Child Studies
• /
• v.9 no.2
• /
• pp.133-156
• /
• 1988

This study investigated developmental change with reference to continuity theory in the acquisition of concepts of kin relation, task difficulty with reference to cognitive complexity, and interrelationships in the performance of cognitive tasks of kinship concepts with reference to cognitive parallelism. The subjects consisted of 6-, 8-, 10, and 12-year-old randomly selected children attending kindergartens or elementary schools in Seoul. The schools were located in various residental areas regarded as either middle or lower class. The 81 boys and 80 girls participated in 3 experiments on classification, seriation, and grouping. The instrument for the classification, seriation, and grouping tasks was composed of 10 10cm black on white line drawings of the head and upper torso area of persons in kin relationship. The data was analyzed with MANOVA. A significant age effect was found in the 3 quasi- experiments. There were significant effects on task difficulty. The biosocial power distribution indirectly influenced children's acquisition of kin relational concepts; that is, children performed better in male-kin than in female-kin tasks. There was a high correlation in performance between the 3 cognitive tasks. These findings support the continuity theory (except for seriation), a model which arranges kin-names in order of cognitive load, the centric status of men in society, and the theory of cognitive developmental parallelism.

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.400-407
• /
• 2008

An Instrument to measure normal spectral emissivity is built using a Fourier Transform-Infrared (FT-IR) spectrometer. The instrument is composed of four main parts, reference blackbody, sample furnace, optics system, and FT-IR spectrometer. Measurement ranges of temperature and wavelength are $200^{\circ}C{\sim}500^{\circ}C$ and $3.5{\mu}m{\sim}20{\mu}m$, respectively. Measured emissivity of the reference blackbody is greater than 0.9993 with combined relative uncertainty less than 0.69%, which can be considered an ideal blackbody. We studied the emissivity of opaque alumina, graphite, anodized aluminum, and steel (IMS 200). It is shown that emissivity increases with the roughness of the steel (IMS 200) surface.