• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1964-1980
• /
• 2016

This paper presents a new simplified harmonics extraction algorithm based on the synchronous reference frame (SRF) for an indirect current controlled (ICC) three-level neutral point diode clamped (NPC) inverter-based shunt active power filter (SAPF). The shunt APF is widely accepted as one of the most effective current harmonics mitigation tools due to its superior adaptability in dynamic state conditions. In its controller, the SRF algorithm which is derived based on the direct-quadrature (DQ) theory has played a significant role as a harmonics extraction algorithm due to its simple implementation features. However, it suffers from significant delays due to its dependency on a numerical filter and unnecessary computation workloads. Moreover, the algorithm is mostly implemented for the direct current controlled (DCC) based SAPF which operates based on a non-sinusoidal reference current. This degrades the mitigation performances since the DCC based operation does not possess exact information on the actual source current which suffers from switching ripples problems. Therefore, three major improvements are introduced which include the development of a mathematical based fundamental component identifier to replace the numerical filter, the removal of redundant features, and the generation of a sinusoidal reference current. The proposed algorithm is developed and evaluated in MATLAB / Simulink. A laboratory prototype utilizing a TMS320F28335 digital signal processor (DSP) is also implemented to validate effectiveness of the proposed algorithm. Both simulation and experimental results are presented. They show significant improvements in terms of total harmonic distortion (THD) and dynamic response when compared to a conventional SRF algorithm.

• Carbon letters
• /
• 제26권
• /
• pp.43-50
• /
• 2018

In this research, a novel and efficient quinoline thioacetamide functionalized magnetic graphene oxide composite ($GO@Fe_3O_4@QTA$) was synthesized and utilized for dispersive magnetic solid phase preconcentration of Cd(II) and Ni(II) ions in urine and various food samples. A number of diverse methods were employed for characterization of the new nanosorbent. The design of experiments approach and response surface methodology were applied to monitor and find the parameters that affect the extraction performance. After sorption and elution steps, the concentrations of target analytes were measured by employing FAAS. The highest extraction performance was achieved under the following experimental conditions: pH, 5.8; sorption time, 6.0 min; $GO@Fe_3O_4@QTA$ amount, 17 mg; 2.4 mL $1.1mol\;L^{-l}$ $HNO_3$ solution as the eluent and elution time, 13.0 min. The detection limit is 0.02 and $0.2ng\;mL^{-1}$ for Cd(II), and Ni(II) ions, respectively. The accuracy of the new method was investigated by analyzing two certified reference materials (sea food mix, Seronorm LOT NO 2525 urine powder). The interfering study revealed that there are no interferences from commonly occurring ions on the extractability of target ions. Finally, the new method was satisfactorily employed for rapid extraction and determination of target ions in urine and various food samples.

• 한국재료학회지
• /
• 제32권6호
• /
• pp.293-300
• /
• 2022

This study investigated a graded-refractive-index (GRIN) coating pattern capable of improving the light extraction efficiency of GaN light-emitting diodes (LEDs). The planar LEDs had total internal reflection thanks to the large difference in refractive index between the LED semiconductor and the surrounding medium (air). The main goal of this paper was to reduce the trapped light inside the LED by controlling the refractive index using various compositions of (TiO₂)_x(SiO₂)_1-x in GRIN LEDs consisting of five dielectric layers. Several types of multilayer LEDs were simulated and it was determined the transmittance value of the LEDs with many layers was greater than the LEDs with less layers. Then, the specific ranges of incident angles of the individual layers which depend on the refractive index were evaluated. According to theoretical calculations, the light extraction efficiency (LEE) of the five-layer GRIN is 25.29 %, 28.54 % and 30.22 %, respectively. Consequently, the five-layer GRIN LEDs patterned enhancement outcome LEE over the reference planar LEDs. The results suggest the increased light extraction efficiency is related to the loss of Fresnel transmission and the release of the light mode trapped inside the LED chip by the graded-refractive-index.

• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2335-2340
• /
• 2009

본 논문은 레퍼런스(reference) 데이터 그룹을 효율적으로 생성하고 활용한 마커리스 증강현실(Markerless Augmented Reality)의 구현 방법을 제안한다. 카메라 설정과 레퍼런스 데이터 그룹 생성, 트래킹 (tracking) 부분으로 되어 있다. 효율적인 레퍼런스 데이터 그룹을 생성하기 위해서는 CAD모델과 같은 3D모델을 필요하며, 다양한 관점에서 본 레퍼런스 데이터 그룹을 생성해야 한다. 모델에 대한 영상에서 특징점들을 추출하고, 광선 추적법을 이용하여 그 특징점에 대응하는 3D좌표를 추출하여, 모델의 특징점들에 대한 2D/3D 대응접의 레퍼런스 데이터 그룹이 구성된다. 트래킹 할 때 현재 프레임영상에서 특징점 들이 가장 많이 매칭되는 레퍼런스 데이터와 그 주위의 모델 데이터만을 이용하기 때문에 빠르게 트래킹할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.903-908
• /
• 2006

Various extraction procedures were investigated using reference materials and samples to evaluate extraction efficiency and effectiveness. Inductively coupled plasma mass spectrometry (ICP-MS) was used to measure total arsenic and to quantitate arsenic species when coupled to an HPLC (high pressure liquid chromatography). Arsenic species were extracted from rice flour (NIST SRM 1568a) with water/methanol mixtures using accelerated solvent extraction (ASE). Total arsenic extraction efficiency ranged from 42 to 64%, for water and various methanol concentrations. From spinach (NIST SRM 1570), freeze-dried apple, and rice flour (NIST SRM 1568a), arsenic species were extracted with trifluoroacetic acid (TFA) at 100 ${^{\circ}C}$. Total arsenic extraction efficiency was 90% for spinach, 75% for freeze-dried apple, and 83% for rice flour. Enzymatic extraction with alpha-amylase and sonication resulted in extraction efficiency of 104% for rice flour, 98% for freeze-dried apple, and 7% for spinach. Chromatograms of arsenic species extracted by the optimum extraction methods were obtained, and the species were quantified. Arsenite (As(III)), arsenate (As(V)), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) were found in the apple sample, and DMA and As(V) in the rice flour sample. As(V) and MMA were found in three herbal dietary supplement samples.

• 대한한방부인과학회지
• /
• 제33권2호
• /
• pp.1-12
• /
• 2020

Objectives: This study was conducted to find out the optimal extraction time for Artemisia argyi. Methods: The compositional pattern was compared with HPLC (High Performance Liquid Chromatography) and GC (Gas-Chromatography) by decocting Artemisia argyi 10, 60, 120 minutes respectively. Results: With longer extraction time, the contents of reference compounds were extracted 1.1 times more when 3,4-dicaffeoylquinic acid was extracted for 60 minutes than when extracted for 10 minutes in HPLC test, but the contents were reduced when extracted for 120 minutes compared to 60 minutes extraction time. 3,4-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid, 4,5-di-O-caffeoylquinic acid, jaceosidin, and eupatilin showed the largest yield rate when extracted for 10 minutes, and it decreased as time passed. The contents of chlorogenic acid, 3,5-dicaffeoylquinic acid, 4,5-dicaffeoylquinic acid, jaceosidin, scoparone, and eupatilin were detected only in 10 minutes extraction but not in 60 or 120 minutes extraction according to GC test. Conclusions: The results show that extraction time could affect the physicochemical characteristic or composition of Artemisia argy extracted. Thus, short extraction time could be useful for decoction of Artemisia argyi.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(C)
• /
• pp.258-261
• /
• 2011

Living in the age of information people face problems related to information overload. Information is easy to produce, store and distribute through various communication channels, one of which is emails. With the appearance of the mobile devices, such as smart phones and tabs, people can have access to email inbox at any moment of time from everywhere. In this paper we present information extraction system with a specific goal of extracting meeting location from the announcement of seminar or conference. We apply a machine learning method (conditional random fields, CRF), train the system using annotated corpus of seminar and conference announcements and validate results by applying various extracted correction rules and patterns. Furthermore, we normalize extracted location, and reference using geo-coding databases, OpenStreetMap and Wikipedia resources to determine real geographical coordinates.

• 한국정보통신학회논문지
• /
• 제25권4호
• /
• pp.530-536
• /
• 2021

LBP 알고리즘은 지역적 질감표현이라는 특성을 가지고 있기 때문에 기준영상과 샘플 영상의 추출 위치와 크기에 따라 전혀 다른 결과를 얻을 수 있다. 이러한 단점을 해결하기 위하여 본 논문에서는 먼저 LBP 기본특성을 조사하고, 기준영상(100×100)의 크기를 영상내의 대부분의 특성을 포함할 수 있도록 하고, 임의의 지점에서 추출된 샘플영상(40×40)을 선택한다. 기준영상의 LBP와 샘플영상의 LBP 간의 상관관계를 이용하여 기준영상의 LBP에서의 매칭위치를 찾은 후, 카이분석 방법을 사용하여 샘플영상과 가장 일치하는 기준영상을 찾는 방법을 제시한다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.229-232
• /
• 2009

Shot change detection is an important technique for effective management of video data, so detection scheme requires adaptive detection techniques to be used actually in various video. In this paper, we propose an adaptive shot change detection algorithm using the mean of feature value on variable reference blocks. Our algorithm determines shot change detection by defining adaptive threshold values with the feature value extracted from video frames and comparing the feature value and the threshold value. We obtained better detection ratio than the conventional methods maximally by 15% in the experiment with the same test sequence. We also had good detection ratio for other several methods of feature extraction and could see real-time operation of shot change detection in the hardware platform with low performance was possible by implementing it in TVUS model of HOMECAST Company. Thus, our algorithm in the paper can be useful in PMP or other portable players.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.317-324
• /
• 2008

This paper proposes a Multiband Shunt Hybrid Active Filter (SHAF) with sensorless control. A plant is modeled in the discrete- time domain and a controller is designed using the Pole shifting law in the polynomial domain. This control approach is very useful for filtering the load harmonics with reduced sensor counts where a low cost solution like SHAF is required. Multiple Synchronous Reference Frames (MSRF) and low pass filters are used to measure the $5^{th}$ and $7^{th}$ harmonic components separately from the load and filter currents. Individual current controllers are designed for the $5^{th}$ and $7^{th}$ harmonic currents. Control is realized in the stationary, three-phase (abc) reference frame. Performance of the controller is validated through simulation, using realistic plant and controller models, as well as experimentally on a full-scale distribution system.