• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.73-78
• /
• 2020

In this study, a novel reactive power control scheme is proposed to supply stable reactive power to the distribution line by compensating a ripple voltage of DC link. In a single-phase system, a magnitude of second harmonic is inevitably generated in the DC link voltage, and this phenomenon is further increased when the capacity of DC link capacitor decreases. Reactive power control was performed by controlling the d-axis current in the virtual synchronous reference frame, and the voltage control for maintaining the DC link voltage was implemented through the q-axis current control. The proposed method for compensating the ripple voltage was classified into three parts, which consist of the extraction unit of DC link voltage, high pass filter (HPF), and time delay unit. HPF removes an offset component of DC link voltage extracted from integral, and a time delay unit compensates the phase leading effect due to the HPF. The compensated DC voltage is used as feedback component of voltage control loop to supply stable reactive power. The performance of the proposed algorithm was verified through simulation and experiments. At DC link capacitance of 375 uF, the magnitude of ripple voltage decreased to 8 Vpp from 74 Vpp in the voltage control loop, and the total harmonic distortion of the current was improved.

• 정보처리학회논문지B
• /
• 제10B권7호
• /
• pp.815-822
• /
• 2003

지문영상의 품질 향상과 특징점 정합은 자동 지문인식 시스템의 중요한 두 단계이다. 본 논문에서는 특징점의 연결정보를 사용한 지문인식 기법을 제안한다. 인식 과정은 전처리와 특징점 추출, 그리고 특징점 pairing을 기반으로 한 정합의 세 단계로 이루어져 있다. 정확성을 위해 세선화된 이미지로부터 지문의 특징점을 추출한 후에, 특징점의 연결정보를 사용한 정합과정을 소개한다. 특징점 정합과정에서 연결정보를 사용하는 것은 간단하지만 정확한 방법이며, 두 지문의 비교단계에서 낮은 비용으로 기준 특징점 쌍을 선택하는 문제를 해결해 준다. 알고리즘은 지문의 회전과 이동에 무관하다. 정합 알고리즘은 반도체 칩방식 지문 입력장치로부터 획득한 500개의 지문영상으로 실험하였으며, 실험 결과는 기존 방법보다 오인식율은 줄어들고 정확도는 증가하였음을 보여준다.

• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.620-624
• /
• 1992

The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.

• 한국컴퓨터정보학회지
• /
• 제14권1호
• /
• pp.265-271
• /
• 2006

F-HMIPv6(Fast-Hierarchical Mobile IP version 6) 네트워크에서는 단말의 이동을 관리하기 위해 MAP(Mobility Anchor Point)를 사용한다. 현재는 매크로 핸드오프 발생 시 단말로부터 가장 멀리 떨어져있는 MAP을 선택하는 기법을 사용하고 있다. 그러나 이 경우 하나의 큰 MAP으로 전체 부하가 몰리는 문제와 이동 단말과 MAP간의 긴 거리로 인해 통신 비용이 증가하는 문제가 있다. 이 연구에서는 단말의 이동속도와 패킷 전송률을 고려하여 통신 비용을 최소화 하는 비용 효율적인 MAP을 선택 기법을 제안한다. 이를 위해 통신 비용을 바인딩 업데이트 비용과 데이터 패킷 전달 비용으로 구분하고 이 통신 비용을 최소화하는 MAP의 크기를 수식으로 표현한다.

• 한국컴퓨터정보학회논문지
• /
• 제23권1호
• /
• pp.75-84
• /
• 2018

In this study, the researchers attempted to automate the process of painting the characters on the road surface, which is currently done by manual labor, by using the information and communication technology. Here are the descriptions of how we put in our efforts to achieve such a goal. First, we familiarized ourselves with the current regulations about painting letters or characters on the road, with reference to Road Mark Installation Management Manual of the National Police Agency. Regarding the graphemes, we adopted a new one using connection components, in Gothic print characters which was within the range of acceptance according to the aforementioned manual. We also made it possible for the automated program to recognize the graphemes by means of the feature dots of the isolated dots, end dots, 2-line gathering dots, and gathering dots of 3 lines or more. Regarding the database, we built graphemes database for plotting information, classified the characters by means of the arrangement information of the graphemes and the layers that the graphemes form within the characters, and last but not least, made the character shape information database for character plotting by using such data. We measured the layers and the arrangement information of the graphemes consisting the characters by using the information of: 1) the information of the position of the center of gravity, and 2) the information of the graphemes that was acquired through vertical exploration from the center of gravity in each grapheme. We identified and compared the group to which each character of the database belonged, and recognized the characters through the use of the information gathered using this method. We analyzed the input characters using the aforementioned analysis method and database, and then converted into plotting information. It was shown that the plotting was performed after the correction.

• 한국가스학회지
• /
• 제25권3호
• /
• pp.9-15
• /
• 2021

본 논문에서는 산업현장 화학물질 인체 접촉 증상 기반 지식베이스 구축 및 화학물질 추정 시스템 설계에 대한 연구이다. 미국NIH에서 제공하는 WISER 프로그램의 499개의 화학물질 접촉 증상 정보로 활용하였다. 지식베이스 구축을 위해 AllegroGraph 7.0.1 프로그램을 이용하였으며 입력된 Chemical structure로 Triple 값인 Cas No., Synonyms, Symptom, SMILES, InChl, Formula를 사용 하였다. 또한 작업자의 증상을 안내하는 방법은 AI 스피커를 활용한 방식이 가능하며 지식베이스 구축 결과 암모니아(CAS No: 7664-41-7)를 기준으로 39개의 증상이 WISER 프로그램과 동일함을 확인 하였다. 이를 통해 화학물질 추정 시스템의 증상 추출 과정에 지식베이스 구축이 가능하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.4191-4211
• /
• 2019

Software product lines (SPLs) are complex software systems by nature due to their common reference architecture and interdependencies. Therefore, any form of evolution can lead to a more complex situation than a single system. On the other hand, software product lines are developed keeping long-term perspectives in mind, which are expected to have a considerable lifespan and a long-term investment. SPL development organizations need to consider software evolution in a systematic way due to their complexity and size. Addressing new user requirements over time is one of the most crucial factors in the successful implementation SPL. Thus, the addition of new requirements or the rapid context change is common in SPL products. To cope with rapid change several researchers have discussed the evolution of software product lines. However, for the evolution of an SPL, the literature did not present a systematic process that would define activities in such a way that would lead to the rapid evolution of software. Our study aims to provide a requirements-driven process that speeds up the requirements engineering process using social network sites in order to achieve rapid software evolution. We used classification, topic modeling, and sentiment extraction to elicit user requirements. Lastly, we conducted a case study on the smartwatch domain to validate our proposed approach. Our results show that users' opinions can contain useful information which can be used by software SPL organizations to evolve their products. Furthermore, our investigation results demonstrate that machine learning algorithms have the capacity to identify relevant information automatically.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권6호
• /
• pp.73-81
• /
• 2018

Inductively coupled plasma-mass spectrometry (ICP-MS), one of the most commonly used instruments for metal analysis, was used to determine total uranium in soil. The method was named as "Modified ASTM C1345-96". When comparing with ASTM C1345-96, digestion time (2~3 days) was shorten to 7 hours and the treatment in furnace was eliminated. In analyses of 26 field soil samples, there was a significant difference in the average concentration of total uranium between modified ASTM C1345-96 and ASTM C1345-96 (F : 6.22 > Fc : 4.03, significance level : 0.05, n=26). The average concentration of modified ASTM C1345-96 was 1.8 times larger than that of ASTM C1345-96. In addition, modified ASTM C1345-96 was compared with other acid digestion methods for soil including ISO 11466, Modified ISO 11466, US EPA-3051, US EPA-3051A and US EPA-3052 using a certificated reference material (SRM 2711a, NIST) and field soil samples with different level of organic matter content (1.6%, 5.8%, 10.6%). Modified ASTM C1345-96 showed the best accuracy of 93.01% for SRM 2711a. Also, modified ASTM C1345-96 showed the higher extraction rates than other digestion methods by 11~45%.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.225-234
• /
• 2019

The purpose of this paper is to analyze the additional construction cost of G-SEED certification for domestic office building reflecting the latest standard(G-SEED 2016-2), and to derive cost impact by category and level. Therefore, it is intended to provide quantitave cost data according to G-SEED certification at the planning phase of the project, estimate the additional construction cost per level according to G-SEED Certification of similar project to be carried out in the future, and encourage G-SEED certification by supporting the decision of the owners. Method: The Process and method of this study are summarized in five steps, 1) Review of previous research, 2) Selection of target project, 3) Scenario setting by level, 4) Additional construction cost for each evaluation category, 5) Extraction of additional construction cost ratio by level. Result: This paper analyzed the cost impact by deriving the additional construction cost of detailed category for level improvement according to the revised G-SEED certification(G-SEED 2016-2). In conclusion, an additional construction cost(ratio) of G-SEED projects to the reference building is drawn as good level; 157,426,241 KWN(+0.43%), very good level; 321,907,802 KWN(+0.88%), excellent level; 999,371,478 KWN(+2.74%), and outstanding level; 1,467,047,718 KWN(+4.02%).

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.715-730
• /
• 2021

The objective of this study was to evaluate antioxidant activities of eggplant (EP) powder with different drying methods and addition levels to pork sausages to improve product quality. Antioxidant activities of EP with different drying methods, particle sizes, and solvents of extraction were determined. Freeze dried (FD) EP extracted with 100% ethanol had higher 2,2-diphenyl-1picrylhydrazyl radical-scavenging activities (DPPH-RSA) and total phenolic content (TPC) values than other drying methods. FD500 had the highest iron chelating ability (ICA) value. Oven-dried (OD) EP at 60℃ had the highest reducing power. Dried EP was added to sausages of six groups: control without EP, reference added with ascorbic acid, O1 and O2 added with 0.25% and 0.5% OD EP, respectively, and F1 and F2 added with 0.25% and 0.5% FD EP, respectively. Pork sausages added with O2 had the lowest TBARS and TPC values. These values increased during storage. Purge loss (%), lightness (L^*), and redness (a^*) values of F2 were lower than those of other groups, whereas sausages containing F2 had the highest yellowness (b^*). pH values of sausages added with EP were increased regardless of the level of EP added. Hardness values of F2 were higher. However, there were no significant differences in other textural characteristics. Sausages added with EP had higher moisture and protein contents (%), but lower fat contents (%). These results indicate that EP powder could be used to retard lipid oxidation and inhibit microbial counts during storage time.