• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.170-177
• /
• 2005

Due to the redundant rebroadcast packets, network-wide broadcasting is a costly operation in wireless mobile ad hoc networks. To reduce this redundancy, most of previous approaches implicitly or explicitly require periodic refreshing of neighborhood information which continuously imposes additional broadcast overheads. In this paper, we propose a practical broadcast pruning scheme based on the local prediction of a remained coverage area. As the proposed scheme uses only information available in the on-going broadcast process, it can minimize the overheads prevalent in previous approaches.

• Industrial Engineering and Management Systems
• /
• v.3 no.1
• /
• pp.78-84
• /
• 2004

To optimize movement of a multi-joint robot arm is known to be a difficult problem, because it is a kind of redundant system. Although the end-effector is set its position by each angle of the joints, the angle of each joint cannot be uniquely determined by the position of the end-effector. There exist the infinite number of different sets of joint angles which represent the same position of the end-effector. This paper describes how to manage the angle of each joint to move its end-effector preferably on an X-Y plane with obstacles in the end-effector’s reachable area, and how to optimize the movement of a multi-joint robot arm, evading obstacles. The definition of “preferable” movement depends upon a purpose of robot operation. First, we divide viewpoints of preference into two, 1) the standpoint of the end-effector, and 2) the standpoint of joints. Then, we define multiple objective functions, and formulate it into a multi-objective programming problem. Finally, we solve it using multi-purpose genetic algorithm, and obtain reasonable results. The method described here is possible to add appropriate objective function if necessary for the purpose.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.763-767
• /
• 2005

RAID were proposed to stored double data or used to parity logging methode for error recovery. We describe a technique for automating the execution of redundant disk array operation, including recovery from errors, independent of array architecture. RAID5 provide highly reliable cost effective secondary storage with high performance for read access and large write accessed. It discusses the two architectural techniques used in disk arrays, striping across multiple disks to improve performance and redundancy to improve reliability. In this paper we compare with performance and reliability in RAID5 real/write to file and stripe size. than suggest to algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.3238-3257
• /
• 2019

Closed-circuit television (CCTV) technology continuously captures and stores video streams. Users are typically required by policy to store all the captured video for a certain period. Accordingly, increasing the number of CCTV operation cycles and photographing positions expands the amount of data to be stored. However, expanding the available storage space for video data incurs increased costs. In recent years, this problem has been addressed with cloud storage solutions, which enable multiple users and devices to access and store data simultaneously. However, because of the large amount of data to be stored, a vast storage space is required. Consequently, cloud storage administrators need a way to store data more efficiently. To save storage space, deduplication technology has been proposed to prevent duplicate storage of the same data. However, because cloud storage is hosted on remote servers, data encryption technology must be applied to address data exposure issues. Although deduplication techniques for encrypted data have been studied, there have been various security vulnerabilities. We attempted to solve this problem by addressing various issues such as poison attacks, property forgery, and ownership management while removing the redundant data and handling the data more securely.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.493-496
• /
• 2005

The PMU (Payload Management Unit) in MSC (Multi-Spectral Camera) is the main subsystem for the management, control and power supply of the MSC payload operation. The PMU shall handle the communication with the BUS (Spacecraft) OBC (On Board Computer) for the command, the telemetry and the communications with the various MSC units. The PMU will perform that distributes power to the various MSC units, collects the telemetry reports from MSC units, performs thermal control of the EOS (Electro-Optical Subsystem), performs the NUC (Non-Uniformity Correction) function of the raw imagery data, and rearranges the pixel data and output it to the DCSU (Data Compression and Storage Unit). The BUS provides high voltage to the MSC. The PMU is connected to primary and redundant BUS power and distributes the high unregulated primary voltages for all MSC sub-units. The PSM (Power Supply Module) is an assembly in the PMU implements the interface between several channels on the input. The bus switches are used to prevent a single point system failure. Such a failure could need the PSS (Power Supply System) requirement to combine the two PSM boards' bus outputs in a wired-OR configuration. In such a configuration if one of the boards' output gets shorted to ground then the entire bus could fail thereby causing the entire MSC to fail. To prevent such a short from pulling down the system, the switch could be opened and disconnect the short from the bus. This switch operation is controlled by the BUS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4997-5006
• /
• 2010

A flash-memory-based SSDs(Solid State Disks) are one of the best media to support portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major database storage components for desktop and server computers. However, we need to improve traditional storage management schemes based on HDD(Hard Disk Drive) and RAID(Redundant array of independent disks) due to the relatively slow or freezing characteristics of write operations of SSDs, as compared to fast read operations. In order to achieve this goal, we propose a new storage management scheme called Hetero-Mirroring based on traditional HDD mirroring scheme. Hetero-Mirroring-based scheme improves RAID-1 operation performance by balancing write-workloads and delaying write operations to avoid SSD freezing. Our test results show that our scheme significantly reduces the write operation overheads and freezing overheads, and improves the performance of traditional SSD-RAID-1 scheme by 18 percent, and the response time of the scheme by 38 percent.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.47-53
• /
• 2020

In the case of a failure due to equipment deterioration in the public address system or a worker's mistake during construction, broadcasting becomes impossible. In this situation, we have designed a more advanced management broadcast system that can broadcast. The broadcasting service is operated using main broadcasting device, and local broadcasting device operates separately only in the local area. If the main broadcasting device becomes inoperable, the procedure for transferring the control activates the device with the local broadcasting devices based on data backed up by the main controller. This paper proposes an improved method of the conventional emergency broadcasting device duplication method. The existing method could not use the standby equipment in the normal state, but in the proposed method, the standby equipment can be used as local broadcasting equipment in usually. This method enables stable system operation while minimizing resource waste due to redundant configuration of expensive devices.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.451-460
• /
• 2010

The purpose of this paper is to present the effective operation method of cyber home learning system 2.0. Cyber home learning system 2.0 which plays an important role to produce and share data of internet users establishing user-centered internet environment is recently introduced as web 2.0 is beginning to appear. This research is based on the case of the operation on cyber home learning system, research literature of web 2.0 as well as expert consulting and performance test. After doing this research, cyber home learning system 2.0 can bring enormous educational effect when it has online education using web-based discussion tool and long distance consulting linking with off line school education. Redundant system configuration, the distributed processing also may be provided by the service was smooth. Moreover, it demands monitoring team consisting of student, parents and teacher in order to provide developmental service.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2012

Because the contact time between satellite and ground station is very limited in LEO (Low Earth Orbit) satellite, all telemetry data generated on spacecraft bus are stored in a mass memory and downlinked to the ground together with real time data during the contact time. The mass memory is initialized in the first system initialization phase and the page status of each memory block is generated step by step. After the completion of the system initialization, the telemetry data are continuously stored and the stored data are played back to the ground by command. And the memory scrubbing is periodically performed for correction of single bit error which can be generated on harsh space environment. This paper introduces the mass memory operation method for telemetry processing of LEO satellite. It includes a general mass memory data structure, the methods of mass memory initialization, scrubbing, data storage and downlink, and mass memory management of primary and redundant mass memory.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1212-1217
• /
• 2004

The main back-bone operation in elliptic curve cryptosystems is scalar point multiplication. The most frequently used method implementing the scalar point multiplication, which is performed in the upper level of GF multiplication and GF division, has been the double-and-add algorithm, which is recently challenged by NAF(Non-Adjacent Format) algorithm. In this paper, we propose a more efficient and novel scalar multiplication method than existing double-and-add by applying redundant receding which originates from radix-4 Booth's algorithm. After deriving the novel quad-and-add algorithm, we created a new operation, named point quadruple, and verified with real application calculation to utilize it. Derived numerical expressions were verified using both C programs and HDL (Hardware Description Language) in real applications. Proposed method of elliptic curve scalar point multiplication can be utilized in many elliptic curve security applications for handling efficient and fast calculations.