• Title/Summary/Keyword: Reduction to bones

Search Result 74, Processing Time 0.024 seconds

Comparative Analysis of Fracture Angulation between Parallel Pinning and Plate Fixation Techniques in the Management of 5th Metacarpal Fractures (제 5 수지 중수골 골절에서 평행 핀 또는 플레이트 고정술 이후 골절각 변화에 대한 비교 연구)

  • Lee, Myungchul;Shin, Hyojung;Choi, Hyungon;Kim, Jeenam;Shin, Donghyeok
    • Archives of Hand and Microsurgery
    • /
    • v.23 no.4
    • /
    • pp.230-238
    • /
    • 2018
  • Purpose: Metacarpal fractures are common injuries of the hand. They are treated using closed reduction (CR) or open reduction (OR) techniques. The management strategy depends on fracture site characteristic and fixation methods. In this study, we evaluated pre- and postoperative fracture angulation, when metacarpal fractures bad been treated using two different techniques: CR with parallel transverse pinning and OR with plate fixation. Methods: Forty-six patients undergoing anatomic reduction to treat extra-articular metacarpal fractures were recruited. They were included in one of two therapeutic groups: Group 1, CR with parallel transverse pinning (n=21); Group 2, OR with plate fixation (n=25). Fracture angulation values have been measured on pre- and postoperative radiologic images. Values were compared between pre- and postoperative states, and between corresponding measurements of each group. Results: All extra-articular metacarpal fractures were successfully treated without wound related complications or the limit of joint motion. Both groups demonstrated adequate reduction at immediate postoperative period (postoperative angulation of group 1, $20^{\circ}{\pm}7^{\circ}$; group 2, $19^{\circ}{\pm}5^{\circ}$). During the observation at follow-up period, Group 1 exhibited slight recurrence (follow-up angulation of group 1, $24^{\circ}{\pm}10^{\circ}$). Nonetheless, Group 2 showed adequate reduction state in both immediate postoperative and long-term follow-up periods (follow-up angulation of group 2, $18^{\circ}{\pm}6^{\circ}$). Conclusion: Extra-articular metacarpal fractures were successfully restored without functional complications. CR with parallel transverse pinning method exhibited recurrence after pin removal, which necessitates cautious postoperative exercise and monitoring.

Efficacy of Statins on BMB or Fracture Risk in Postmenopausal Women (스타틴이 폐경기 여성의 골밀도 혹은 골절위험에 미치는 효과 -보고된 임상연구결과 분석을 중심으로-)

  • Bang, Joon-Seok
    • Korean Journal of Clinical Pharmacy
    • /
    • v.16 no.2
    • /
    • pp.86-91
    • /
    • 2006
  • There are 3 different hypotheses on how statins may affect bones, through promoting bone formation, inhibiting bone resorption or through anti-inflammatory effect. In the 3 cross-sectional studies above, one showed increase BMD at hip and spine, one showed increase BMD only at mid-forearm and one showed that the risk reduction in fractures is not explained by the changes in BMD however, all 3 studies showed a decrease in risk of fracture associated with statins. In the 2 prospective cohort studies, one showed the use of statins was not associated with BMD at any skeletal site or decreasing the risk of fracture, and the other showed statins except pravastatin decreased in risk of vertebrate fracture but not affecting lumbar spine BMD. All of case-control studies indicated reduction in fracture risk but did not provide any data regarding BMD. 2 of the randomized, controlled studies showed no significant reduction in fracture risk as well as statins' effects on BMD. Finally, one longitudinal study showed statin use reduced fracture risk and increased BMD. Among the conflicting results shown above, even when statin use was shown to increase BMD, it does not seem to account for the reduction in fracture risk. There may be different ways that statins affect bone other than those hypotheses proposed above. Many studies seem to agree that pravastatin does not have any effect on bone. Some studies suggested that the reason statins did not achieve clinically significant increases in BMD in some studies, is due to the low affinity of statins on bone; statins are designed to act in the liver therefore their effective concentration in extrahepatic tissue is low. The limitations to those studies discussed above. Many studies did not account for the change of lifestyle while subjects' were on statins. Increases in weight bearing exercise and changes in diet might affect BMD and thus reduce risk of fractures. Mental alertness and vision acuity might prevent falls from occurring; many statin-users in the studies were young so the risk of fractures from falls would be decreased. Almost all of the studies failed exclude patients with neurological problems. During study periods, many subjects may have been started on drugs for diseases that usually occur with aging which could cause drowsiness and lead to falls. The sample sizes used in some of the trials were small and the duration of treatment and follow up might not have been long enough to see clinically relevant results.

  • PDF

A Study on the Breeding Density and Diet of Magpie Pica pica in Jeju Island1a (제주도에 서식하는 까치 Pica pica의 번식 밀도 및 식이물에 관한 연구)

  • Park, Joo-Yeon;Kim, Byoung-Soo;Oh, Hong-Shik
    • Korean Journal of Environment and Ecology
    • /
    • v.22 no.6
    • /
    • pp.648-657
    • /
    • 2008
  • This research was conducted to investigate the breeding density and seasonal food items of the magpies in Jeju Island and the near-manned islets. The examination of nest distribution to determine breeding density was performed during breeding season from February 2006 to April 2008, and that of food items from May 2006 to February 2008. A total of 2,113 nests were found across Jeju Island, the average density was $1.33\;nest/km^2$, and the magpies were distributed up to 600 meters above the sea level. The nest density was the highest in the central areas of Jeju Island, with 688 nests at $3.61\;nest/km^2$, while that in the eastern areas was the lowest, with 214 nests at $0.66\;nest/km^2$. In terms of the number of nests depending on the height above the sea level, 1,172 nests, which was equivalent to the density of $1.85\;nest/km^2$, was observed below 100m and highest among the intervals of height, but 16 nests found at 500-600m were the lowest, corresponding to $0.20\;nest/km^2$. The number of nests found in the manned islets near Jeju Island was eight in Biyang-do with the density of $15.38\;nest/km^2$, nine in U-do with $1.49\;nest/km^2$, and one in Gapa-do with $1.15\;nest/km^2$, whereas none of nests were observed in Mara-do. The contents of stomach consisted of 17 types of prey sources including countless bones, eggshells, plants, and seed, most of which were the individuals of the order Coleoptera. In spring and summer, the foraging frequency for invertebrate animals such as insects was high, but less than 30% in winter. In contrast, the magpies preyed upon plants and seeds at the frequency of 10% and 30%, respectively, in spring, while the foraging frequencies for both of them were 100% in winter and higher than any of other seasons. Eggshells and bones of birds were also detected infrequently. If the density of the magpies, which may play role as the upper predator within the ecosystem, increases, it would be expected to affect directly the reduction of the number of the species and population of endemic animals such as small birds and reptiles, etc. Therefore, it is considered that long-term monitoring for the density of the magpies and precaution is prerequisite to minimize adverse effects on ecosystem.

Malunion of the Jaw Fractures Complicated Following the Primary Managements (악골절 치료후 부정유합에 관한 임상적 연구)

  • Kim, Dae-Sung;Kim, Myung-Rae;Choi, Jang-Woo
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.25 no.4
    • /
    • pp.356-360
    • /
    • 1999
  • PURPOSE : This is to review the complicated jaw fractures that had been referred for revision of the unsatisfactory results, and to provide proper managements for the easily complicated jaw fractures. MATERIALS & METHODS : Twenty-nine patients who had been revised due to malunion or complicated fractures of facial bones for last 3 years were reviewed. The main problems required for revision, type of fractures complicated, the primary managements to be reclaimed, the specialties to be involved, the management to be reclaimed, time elapsed to seek reoperation, type of revision surgeries, residual complication were analysed with medical records, radiographs and final examinations. RESULTS: The major complaints were malocclusion(79.3%), facial disfigurement(41.3%), TMJ problems (13.7%), neurologic problems(10.3%), non-union(10.3%), and infection(6.8%). Unsatisfactory results were occurred most frequently after improper management of the multiple fractures of the mandible (62.2%), combined fractures of maxilla and mandible (20.6%), fracture of zygomatico-maxillary complex and midpalate (17.2%). The complications to be corrected were widened or collapsed dental arches (79.3%), improperly reduced condyles (41.3%), painful TMJ (34.4%), limited jaw excursion (31.0%), over-reduction of zygoma (13.7%), and nonunion with infection(13.7%). and dysesthesia (10.3%). The primary managements were nendereet by plastic surgeons in 82.7%(24/29) and by oral surgeons in 7.6%(2/29). Main causes of malunion are inadequate ORIF in 76%, unawareness & delay in 17%, and delayed due to systemic cares in 17%. 76% of 29 patients had been in state of intermaxillary fixation for over 4 weeks. Revision were done by means of "refracture and ORIF"in 48.2%(14/29), orthognathic osteotomies with bone grafts in 55.1%(16/29), and camouflage countering & alloplastic implantations in 37.9%(11/29), TMJ surgeries in 17.2%, micro-neurosurgeries in 11.6%. Residual complications were limited mouth opening in 24.1% (7/29), paresthesia in 13.7%, resorption of reduced condyle in 10.3%. CONCLUSIONS : Failure of initial treatment of jaw fractures is due to improper diagnosis and inadequate treatment with lack of sufficient knowledge of stomatognathic system. It is crucial to judge jaw fracture and patients accurately, moreover, the best way of treatments has to be selected. Consideration of these factors in treatment could minimize the complication of jaw fractures.

  • PDF

The Relationship between Food Habit, Nutrient Intakes and Bone Mineral Density and Bone Mineral Content in Adult Women (성인여성의 식습관과 영양섭취상태와 골밀도 및 골무기질함량과의 관계)

  • 최미자;정윤정
    • Journal of Nutrition and Health
    • /
    • v.31 no.9
    • /
    • pp.1446-1456
    • /
    • 1998
  • Bones are important parts in sustaining the shape of the body, but they are also metabolic organs which undergo bone remodeling by constant bone resorption and formation. Osteoporosis, the typical metabolic bone disease, is characterized by a reduction in bone mineral density (BMD). Women more than men are at risk fir osteoporosis-related fractures, especially in the lumbar spine, wrist, and hip region. Risk of fracture depends on one's BMD, which open determined by the peak bone mass value achieved at skeletal maturity and followed by subsequent age-and menopause-related bone loss. Genetic and environmental factors are known to play a key role in bone metabolism and diet is considered as one of the important environmental factors. The purpose of the present study was to assess the status of BMD and bone mineral content(BMC) to clarify the relationships between dietary intakes and the risk of osteoporosis in adult women in Taegu. Subjects were 130 healthy females in between 20 and 69 years of age. BMD and BMC of the lumbar spine(venebrae L2-4) of the subjects were measured by dual energy X-ray absorptiometry. The average age of the subjects was 47.4${\pm}$11.7 years old, the average weight was 57.2${\pm}$8.4kg, the average age of menarche was 16.6${\pm}$1.9 years old and the average age of menopause was 48.4${\pm}$5.3 years old. The nutrient intakes of the subjects measured by the convenient method were generally lower than the level of RDA. The result of nutrient intake assessed has shown that the average energy intake was 1701${\pm}$316kca1 which is 85.1% of the RDA and the average calcium intake was 485.4${\pm}$172.3mg which is 69.3% of the RDA. The intakes of protein, vitamin A, vitamin B$_1$, niacin were greater than the RDA, whereas the remaining nutrient intakes were lower than the RDA. The average BMD of the subjects was shown to be 1.06${\pm}$1.09g/$\textrm{cm}^2$. The highest BMD of 1.24${\pm}$0.14g/$\textrm{cm}^2$ was noticed in the subjects of 30s compared to 20s, 40s, 50s, 60s. The BMD values were compared by the relative body weight(R3W) of the menopause subjects, and it was found that the underweight group had significant lower BMB while the rest of the groups did not have any differences in BMD. The most strongly correlated nutrient with BMD among the menopause subjects appeared to be calcium. The women whose Ca intakes were higher than 500mg showed the significantly higher BMD than those with Ca intakes lower than 500mg. This study suggests that the most effective way to prevent osteoporosis and to reduce the incidences of fractures seems to be minimizing bone loss through the adequate intake of calcium as well as avoiding underweight, especially in menopausal women. (Korean J Nutrition 31(9) . 1446-1456, 1998)

  • PDF

Factor Analysis of Biometric Traits of Kankrej Cows to Explain Body Conformation

  • Pundir, R.K.;Singh, P.K.;Singh, K.P.;Dangi, P.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.24 no.4
    • /
    • pp.449-456
    • /
    • 2011
  • Eighteen different biometric traits in 407 Kankrej cows from their breeding zone, i.e. Palanpur district of Gujarat, India, were recorded and analyzed by factor analysis to explain body conformation. The averages of body length, height at withers, height at shoulder, height at knee, heart girth, paunch girth, face length, face width, horn length, horn diameter, distance between horns, ear length, ear width, neck length, neck diameter, tail length with switch, tail length without switch and distance between hip bones were $123.44{\pm}0.37$, $124.49{\pm}0.28$, $94.68{\pm}0.30$, $38.2{\pm}0.14$, $162.56{\pm}0.56$, $178.95{\pm}0.70$, $44.09{\pm}0.10$, $15.91{\pm}0.05$, $42.47{\pm}0.53$, $26.07{\pm}0.19$, $13.34{\pm}0.08$, $31.24{\pm}0.12$, $16.10{\pm}0.05$, $50.63{\pm}0.18$, $73.21{\pm}0.32$, $111.62{\pm}0.53$, $89.34{\pm}0.34$ and $17.28{\pm}0.10\;cm$, respectively. The correlation coefficients between different traits ranged from -0.806 (horn diameter and distance between horns) to 0.815 (heart girth and paunch girth). Most of the correlations were positive and significant. Factor analysis with promax rotation with power 3 revealed three factors which explained about 66.02% of the total variation. Factor 1 described the cow body and explained 38.89% of total variation. The second factor described the front view/face of the cow and explained 19.68% of total variation. The third factor described the back of the cow and explained 7.44% of total variation. It was necessary to include some more variables for factor 3 to obtain a reliable estimate of the back view of the cow. The lower communities shown for distance between horns, horn diameter, ear width and neck diameter indicated that these traits did not contribute effectively to explaining body conformation and can be dropped from recording, whereas all other traits are important and needed to explain body conformation in Kankrej cows. The result suggests that principal component analysis (PCA) could be used in breeding programs with a drastic reduction in the number of biometric traits to be recorded to explain body conformation.

A Study of the Metal Artifact Reduction using Dual Energy CT : Clinical Applications of Dual Energy and MAR Algorithm (Dual Energy CT를 이용한 금속물질 인공물 감소방법 : Dual Energy와 MAR알고리즘의 임상적 응용)

  • Park, Ki Seok;Choi, Woo Jeon;Kim, Dong Hyun
    • Journal of the Korean Society of Radiology
    • /
    • v.15 no.3
    • /
    • pp.273-279
    • /
    • 2021
  • Metal material inserted into the body have a large difference in density from human tissues or bones around the Metal during CT scans.. Therefore, the Metal material inserted into the body produces Artifact. Metal Artifact, which occurs around Metals, can degrade the quality of CT images, causing confusion when medical team diagnose lesions. Through this experiment, we confirm that the occurrence of Artifacts decrease by using Dual energy CT and MAR algorithm in Single source Dual energy CT. We also want to present basic data on clinical application methods by comparing and analyzing the characteristics of images obtained by each method. Using GE 750HD CT, artificial implants were scanned using general method and Dual energy. Then we apply the MAR algorithm to each image obtained. And all previously acquired images were compared and analyzed the characteristics of the examination, such as image quality evaluation and dose evaluation. Images with MAR algorithm and Dual Energy confirmed a decrease in Metal Artifact. Images with MAR algorithm have reduced Metal Artifact, but have the disadvantage of distorting the details of artificial joint implants. On the other hand images teseted with Dual Energy have the advantage of being able to implement details than those applied with MAR algorithms, it takes longer to reconstruct the image and the exposure dose was about four times higher than those applied with MAR algorithm. In order to locate Metals, such as the post-operative follow-up period, it is useful to apply MAR algorithm to obtain images. And it is more useful to examine with Dual Energy when micro lesion identification, such as cardiac examination, and surgical planning or when tests are performed in diagnostic way.

Effects of fluoride on osteoclastic bone resolution during experimentally moved rat molars (백서에서 불소의 투여가 실험적 치아이동시 파골세포에 의한 골흡수에 미치는 영향)

  • Kim, Do-Hoon;Moon, Yoon-Shik;Ko, Jea-Seung;Kim, Hyun-Man
    • The korean journal of orthodontics
    • /
    • v.30 no.6 s.83
    • /
    • pp.723-730
    • /
    • 2000
  • Orthodontic tooth movement requires remodelling of periodontal tissues, especially alveolar bone. Fluoride is known to be a potent inhibitor of osteoclastic bone resorption. The purpose of this study was to examine the effects of a consumption of fluoride on osteoclast numbers appearing on the pressure side of alveolar bones at experimental tooth movement. 40 male rats were exposed to 0, 10, 25 mg/kg/day of sodium fluoride(NaF) in their drinking water for up to 60 days. Orthodontic appliance were activated to mesially tip maxillary first molar with 50-70g. The rats were sacrificed at 1, 2, 4 days after initial activation. The number of osteoclast was counted in a $450\times700\;{\mu}m^2$ area interradicular septum on the pressure side of the maxillary first molar. The results were as fellows, 1. There was significantly different osteoclast number between control group and 25 mg/kg/day group at all measured time. (p<0.05) 2. There was significantly different active bone-resorption area between control group and 25 mg/kg/day group except at 96 hours post activation. (p<0.05) 3. There was slight reduction of active bone- resorption area in control group from 48 hours to 96 hours but in both 10 mg/kg/day group and 25 mg/kg/day group a slight increase was observed from 48 hours to 96 hours.

  • PDF

A Study on Utilization and Consumption Promotion of Seafood in Elementary School Lunch Program (초등학교 급식의 수산물 이용실태 및 소비촉진 방안에 관한 연구)

  • Cho, Mi-Yeon;Lee, Min-June;Lee, Young-Mee
    • Journal of the Korean Society of Food Culture
    • /
    • v.18 no.2
    • /
    • pp.139-150
    • /
    • 2003
  • The objective of this study consists in promoting seafood consumption by increasing its intake opportunities for children through analysis of seafood using frequency in the elementary school lunch program. For that purpose, randomly sampled out from elementary schools through the county were 155 dietitians and 5th grade 3581 children, on whom a mail survey was conducted to analyse their seafood using frequency, and preference, and lunch menu by seasons. Results of this study are as follows : The seafood using frequency of the respondents represented the highest value in one or two times a week, while obstacles in seafood use presented high values in the safety of food by 71.6% and children preference by 68.4%. The seafood intake frequency of the respondents showed the highest value in three or four times a week by 34.5% and the places of seafood intake indicated the highest response in the home by 43.5% and then school lunch and dining out. The dietitians responded that children for the most part had not a preference for seafood, whereas the children pointed out average by 46.2%. As for reasons for avoidance of seafood, the dietitians expressed the highest response in it depends cooking methods by 45.8%, while the children because of its peculiar taste and smell by 42.1%. Their required improvement showed the highest response in the taste improvement by 51.8%. The children most preference for seafood that dietitians thought included fried Alaska pollack and shrimp cutlet, while dislikes braised mackerels and seasoned cold jelly fish. Cooking methods frequently used were represented in order of soup, hot soup, and stew, and the children's preferred cooking method was from fried food. Above results suggested that the intention to increase seafood using frequency is needed to at the time of planning the menus so that more seafood-providing opportunities can be given. The development of cooking methods is urgently needed that can change the taste or the smell of seafood, and concurrently with this conveniences be taken into account in eating such as elimination of bones, etc. as early as the states of purchase or checking of seafood. The reflection of the preferred cooking methods is thought to contribute to the enhancement of satisfaction with the seafood as well as to the reduction of food remnants. The recommendation of intake of low preference but nutritionally good seafood is required to be expanded in nutrition education.

Process development of a virally-safe dental xenograft material from porcine bones (바이러스 안전성이 보증된 돼지유래 골 이식재 제조 공정 개발)

  • Kim, Dong-Myong;Kang, Ho-Chang;Cha, Hyung-Joon;Bae, Jung Eun;Kim, In Seop
    • Korean Journal of Microbiology
    • /
    • v.52 no.2
    • /
    • pp.140-147
    • /
    • 2016
  • A process for manufacturing virally-safe porcine bone hydroxyapatite (HA) has been developed to serve as advanced xenograft material for dental applications. Porcine bone pieces were defatted with successive treatments of 30% hydrogen peroxide and 80% ethyl alcohol. The defatted porcine bone pieces were heat-treated in an oxygen atmosphere box furnace at $1,300^{\circ}C$ to remove collagen and organic compounds. The bone pieces were ground with a grinder and then the bone powder was sterilized by gamma irradiation. Morphological characteristics such as SEM (Scanning Electron Microscopy) and TEM (Transmission Electron Microscopy) images of the resulting porcine bone HA (THE Graft$^{(R)}$) were similar to those of a commercial bovine bone HA (Bio-Oss$^{(R)}$). In order to evaluate the efficacy of $1,300^{\circ}C$ heat treatment and gamma irradiation at a dose of 25 kGy for the inactivation of porcine viruses during the manufacture of porcine bone HA, a variety of experimental porcine viruses including transmissible gastroenteritis virus (TGEV), pseudorabies virus (PRV), porcine rotavirus (PRoV), and porcine parvovirus (PPV) were chosen. TGEV, PRV, PRoV, and PPV were completely inactivated to undetectable levels during the $1,300^{\circ}C$ heat treatment. The mean log reduction factors achieved were $${\geq_-}4.65$$ for TGEV, $${\geq_-}5.81$$ for PRV, $${\geq_-}6.28$$ for PRoV, and $${\geq_-}5.21$$ for PPV. Gamma irradiation was also very effective at inactivating the viruses. TGEV, PRV, PRoV, and PPV were completely inactivated to undetectable levels during the gamma irradiation. The mean log reduction factors achieved were $${\geq_-}4.65$$ for TGEV, $${\geq_-}5.87$$ for PRV, $${\geq_-}6.05$$ for PRoV, and $${\geq_-}4.89$$ for PPV. The cumulative log reduction factors achieved using the two different virus inactivation processes were $${\geq_-}9.30$$ for TGEV, $${\geq_-}11.68$$ for PRV, $${\geq_-}12.33$$ for PRoV, and $${\geq_-}10.10$$ for PPV. These results indicate that the manufacturing process for porcine bone HA from porcine-bone material has sufficient virus-reducing capacity to achieve a high margin of virus safety.