• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.480-485
• /
• 2010

In this work, the closing behavior of cylindrical-shaped voids was experimentally investigated according to various parameters such as reduction ratio in height, initial void size and billet rotation during hot open die forging process. The reduction ratio in height, number of path, and billet rotation were chosen as key process parameters which influence the void closing behavior including the change of void shape and size. On the other hand, values of die overlapping and die width ratio were set to be constant. Void closing behavior was estimated by microscopic observation. Based on the observations, it was confirmed that application of billet rotation is more efficient to eliminate the void with less reduction ratio in height. The experimental results obtained from this study could be helpful to establish the optimum path schedule of open die forging process.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.37-44
• /
• 2005

The electrolytic water(EW) has been used in agriculture, medical, semiconductor, and household fields. However there has been no use of EW in the textile process so far, because the application in the textile industry has been needed a large amount of EW in real process conditions. Recently, we have got electrolytic oxidation water(EOW) and electrolytic reduction water(ERW) by development of a electricity electron technology. And, the productivity of EW manufacture apparatus is arrived to large capacity. As a result, the application of EW could be possible in the textile industry. In this study, to confirm the possibility of application of EW, we scoured and hydrolyzed PET fabric using the EW. It was possible that the application of ERW for the scouring and hydrolysis of PET fabrics in the textile process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.310-317
• /
• 2006

Currently most practical vibration and structural problems in automotive suspensions require the use of the finite element method to obtain their structural responses. When the finite element model has a very large number of degrees of freedom the harmonic and dynamic analyses are computationally too expensive to repeat within a feasible design process time. To alleviate the computational difficulty, this paper presents a moment-matching based model order reduction (MOR) which reduces the number of degrees of freedom of the original finite element model and speeds up the necessary simulations with the reduced-size models. The moment-matching model reduction via the Arnoldi process is performed directly to ANSYS finite element models by software mor4ansys. Among automotive suspension components, a knuckle is taken as an example to demonstrate the advantages of this approach for vibration simulation. The frequency and transient dynamic responses by the MOR are compared with those by the mode superposition method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.11
• /
• pp.619-625
• /
• 2003

We proposed an optimum PID controller design method of the Smith Predictor It can be applied to various processes. The real process is approximated via the second order plus time delay model (SOPTD) whose parameters are specified through a model reduction algorithm. We already proposed a new model reduction method that considered four point in the Nyquist curve to reduced the steady state error between the real process model and the reduced model using the gradient decent method and the genetic algorithms. In addition, the Smith predictor is used to compensate time delay of the real process model. In this paper, the new optimum parameter tuning algorithm for PID controller of the Smith Predictor is proposed through ITAE as performance index. The Simulation results show the validity and improvement of performance for various processes.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.103-107
• /
• 2006

In grain oriented electrical steel process, hot band annealing has thought to be essential for obtaining good magnetic properties. New hot rolling method of heavy reduction in early hot rolling stage was applied to obtain good magnetic properties in GO process without hot band annealing. Hot rolling was carried out by varyinghot rolling reduction distribution along hot rolling pass. The heavy hot rolling reduction in rear stand improves the magnetic flux density in the case of no hot band annealing. The hot band specimens of the heavy reduction in front stand shows the elongated hot deformed microstructures in the center layer and strong {001}<110> texture.On the contrary, the heavily reduced specimens in rear stand shows the recrystallization in the center layer of hot band and strong {111}<112> and {110}<001> textures.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.187-191
• /
• 2001

In the paper, an approach to the development of the selective catalytic reduction process of NOx is presented. The reduction process can be efficiently controlled using a conventional combination of feed-forward and feed-back control structures. The aim of this paper is to test and verify an approach to the SCR process which is based on an industrial pilot plant of combustion and nitric oxide formation. The systems are based on measurements of a NOx removal ratio and the fuel flow rate, and NH$_3$slip which are usually available as a part of de-NOx control system.

• The Journal of Information Technology and Database
• /
• v.1 no.2
• /
• pp.25-35
• /
• 1994

Downsizing IS is rapidly emerging as one of new information systems of the 1990s that involves (1) the cost reduction, (2) the reduction of MIS staff, and (3) the transfer of IS functions to end - users. As downsizing is relatively new information systems, little is known about the causes, the process, or the consequences of downsizing. Case study was chosen as the research methodology of this study. The downsizing IS of Namsun Aluminum Co. Ltd. in Taugu City was chosen for the exploratory case study. The detailed and qualitative analyses to Namsun were performed with the use of observation, participation, and interview techniques. Consequently, the causes, the process, and the consequences of Namsun's downsizing were analyzed and discussed. As for the main cause, downsizing was started with the purpose of cost reduction. The important consequences of downsizing IS are as follows : (1) About 700 million won reduction in the cost of initially developing the downsizing was achieved. (2) Downsizing is performing Namsun's mission critical applications. (3) Namsun's downsizing could be considered to be SIS(strategic information systems).

• Bulletin of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.89-94
• /
• 1990

The redox properties of 2-amino-1-cyclopentene-1-dithiocarboxylate anion (acdc) and its oxovanadium complex, $VO(acdc)_2$ have been investigated in dimethylformamide (DMF) with polarography and cyclic voltammetry. Bis(2-amino-1-cyclopentene-1-dithiocarboxylate) oxovanadium(IV) exhibits two polarographic oxidation waves and two reduction waves in the potential range from +0.50V to - 2.4V vs. the Ag/AgCl (DMF) reference electrode. The second oxidation wave appeared at - 0.08V is found to be reversible and is attributed to the formation of $VO(acdc)_2\;^+$. The first reduction process (at - 0.60V) is also reversible and this reduction process is caused by the electrode process of formation of $VO(acdc)_2$-species. The half wave potential for the reduction, V(IV)$\to$V(III) is more positive for oxovanadium complexes containing sulfur donor atoms than other VO(IV) complexes having oxygen or nitrogen donor atoms.

• Transactions of Materials Processing
• /
• v.18 no.7
• /
• pp.550-555
• /
• 2009

In the multi-pass shape drawing process, the pass schedule that includes the determination of reduction ratio and intermediate die shape is very important. This study used the equal reduction, equal load, and electric field analysis method for pass schedule of the multi-pass shape drawing. The reduction ratio was calculated by the equal reduction and equal load method. And the intermediate die shape was determined by the result of the electric field analysis and the calculated reduction ratio. The proposed pass schedule method was applied to a shape drawing for producing cross roller guide. Finally, FE-analysis and shape drawing experiment were performed to verify the effectiveness of the proposed method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.135-141
• /
• 2008

Independent suspension axle and final reduction gear for special-purpose vehicles such as a armored vehicles are almost imported in Germany etc. so, developing them is necessary to save cost. In severe condition (open fields, water surface driving, obstacle pass), special-purpose vehicles must work well. Drop box, axle and final reduction gear performed static analysis. We know that is possible weight reduction. The purpose of this paper is to find out the optimal shape of final reduction gear's case by means of response surface methodology. The response surface method is the statistical method which can be applied to the non-sensitivity based optimization. The response surface which is constructed by the least square method contains only the polynomial terms so that the global maximum and minimum points are easily obtained.