• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.116-123
• /
• 2004

The demand for the stable and comfortable cabin of a high speed passenger ship is increasing. The study on shipboard comfort has been mainly concentrated on the motion control of a whole hull body. In this study, however, a new control system operated by two parallel robots (3RPS, 3SPR) such as the active suspension system of motor vehicle is proposed. The goal of this control is keeping zero velocity of the upper robot (cabin) although the lower robot (ship) is moving by the waves. Jacobian matrix was used to design the controller, From the simulation results, the remarkable reduction of motion of the cabin (upper platform) was observed. The 3SPR parallel robot shows better performance compared to the 3RPS robot.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.77-81
• /
• 2009

The radar cross section (RCS) of a warship is one of the most important design features in terms of her survivability in hostile environments. Ocean waves continuously changes the attitude of an objective warship to hostile radar and distorts the RCS as a result. This paper presents a dynamic RCS analysis technique and procedure that considers temporal ship motion. First, data sets are prepared for ship motions in 6 degrees of freedom, which are numerically simulated for an objective warship via frequency to time domain conversion with response amplitude operators and specified ocean wave spectra. Second, a series of RCS analysis models are transformed geometrically by referring to ship motion data sets. Finally, temporal RCS analyses are carried out with the RCS simulation code, SYSCOS. As an example, RCS analysis results are given for a virtual warship, which show that ship motions temporally change RCS values and cause RCS reduction compared with static value in terms of mean values.

• 소음진동
• /
• 제10권2호
• /
• pp.345-352
• /
• 2000

최근 여객선이 고속화, 고금화되고 있는 추세에 따라 선실내 소음 저감이 중요한 설계 요소로 간주되고 있다. 일반적으로 선박 소으믄 음암레벨로 평가되나 여객선의 경우 승객에게 더욱 쾌적한 환경을 제공하기 위하여 음질을 개선할 필요가 있다. 본 연구에서는 연근해를 운항 중인 기존 고속 여객선의 소음을 계측하고, 정신음향학 분야에서 제시된 Zwicker Loudness 계산식에 의거하여 음의 크기, 거칙기, 변동세기 및 날카로움으로 음질을 평가하였다. 또한, 각각의 음질 평가요소와 음압간의 상관관계를 분석하였다. 상기 결과로부터 고속여객선의 음의 크기는 음압과 비례하는 반면에 음의 거질치 (roughness),변동세기(fluctuation strength)및 날카로움(sharpness)은 선박의 운동과 추락변동 등으로 인하여 음압과 비선형적인 상관관계를 나타냄을 확인하였다.

• 한국항해항만학회지
• /
• 제29권10호
• /
• pp.839-845
• /
• 2005

조타에 의해 불규칙파 중 선박의 선수동요 및 횡요를 제어하는 횡요 감소시스템에 관한 연구를 수행하였다. 횡요를 포함한 선박 운동 시뮬레이션을 위해 4-자유도 조종 운동방정식을 사용하였고, 선체에 가해지는 외력으로서 파강제력이 고려되었다. 파강제력은 3차원 특이점 분포법에서 얻어진 주파수 전달함수로부터 시간영역해석법을 적용하였다. 선수동요와 횡요를 제어하는 PD 제어기를 각각 구성하고, 이를 선형 결합하여 횡요 감소 조타 제어기를 구성하였다. 조타 속도 및 타의 종류를 변화시켜 선수동요 및 횡요의 제어효율을 검토하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.55-61
• /
• 2005

조타에 의해 불규칙파$\cdot$중 선박의 선수동요 및 횡요를 제어하는 횡요 감소시스템에 관한 연구를 수행하였다. 횡요를 포함한 선박 운동 시뮬레이션을 위해 4-자유도 조종 운동방정식을 사용하였고, 선체에 가해지는 외력으로서 파강제력이 고려되었다. 파강제력은 3차원 특이점 분포법에서 얻어진 주파수 전달함수로부터 시간영역해석법을 적용하였다. 선수동요와 횡요를 제어하는 PD 제어기를 각각 구성하고, 이를 선형 결합하여 횡요 감소 조타 제어기를 구성하였다. 조타 속도 및 타의 종류를 변화시켜 선수동요 및 횡요의 제어효율을 검토하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.30-35
• /
• 2004

Several roll motion reduction devices are reviewed and suggested for the application in FPSO. The firstly suggested solution is the shape of the bilge. The next is a bilge keel. The last suggestion is the ART (anti-rolling tank). Typical U-tube type ART is designed for a FPSO and examined extensively by model experiment. The model section was made of transparent acryl. Free decay test, forced oscillation test and wave test were carried out at a two-dimensional wave flume. U-tube type ART is effective only when the natural periods of ART and ship are same. Therefore, the divided U-tube type ART with split plate is suggested for the reduction of the roll motion of a FPSO over the wide range of the roll period.

• 수산해양교육연구
• /
• 제9권2호
• /
• pp.167-178
• /
• 1997

It has been expected not only for crew but also for passengers to realize a ship whose rolling and other motions are small as much as possible. Restricting our consideration to the roll reduction, the conventional roll stabilization system, fins or anti-rolling tanks hve been utiized as the actuator. Excessive motions would interfere with the recreational activities of passengers on a cruise ship. Often more than half of the load of a containership is stowed above deck where it is subjected to large acclerations due to rolling. In some situations this may cause some internal damage to the contents of the containers; in more severe situations failure of the lashing can occur and containers may be lost over-board. Underdeck cargo in ordinary cargo ships and bulk commodities in colliers, ore ships and grain ships can shift if the motions become too severe. The purpose of this study is to concentrate on the additions. either internal or external to the hull, that reduce or otherwise improve the motion responses of the hull. It is assumed that the additions are such that their benefit to the motions of the ship outweights any impact on the ability of the ship to perform its assigned task. It is particularly challenging to obtain large improvements in the motion characteristics of existing ships that are being rebuilt or modified for some task not anticipated in their original design. Further the authors will statistically analyze the influence of ruder-roll-yaw coupling motion in the case of application of this advanced control method to various kinds of ship.

• 대한조선학회지
• /
• 제24권4호
• /
• pp.71-83
• /
• 1987

There is at present a growing interest in the use of SWATH(Small Waterplane Area Twin Hull )ship for a variety of purposes due to their good seakeeping characteristics, small speed reduction in wave, and large deck area. Highly sophisticated design technology is requested to develop the SWATH ship. This paper describes the design technology for high speed coastal passenger SWATH ship which includes feasibility study, general arrangement and hull form design, resistance and propulsion test, motion test in regular waves, control fin design, and structural design.

• 산업경영시스템학회지
• /
• 제30권2호
• /
• pp.67-74
• /
• 2007

The objective of this research is to select the most effective technique among task related techniques(motion & time study, job redesign, physical environment improvement) for improving work efficiency in shipbuilding enterprise. This study consists of several principal steps. The first step is to design critical criteria in evaluating work efficiency in ship-building enterprises. The second step is to develop sub-criteria of the critical criteria. The third step is to develop a four level AHP(Analytic Hierarchy Process) structure using the critical criteria, sub-criteria and techniques among task related techniques. The fourth step is to develop the pairwise comparison matrix at each level of AHP structure, which was based on survey data collected at the H heavy industry. And the last step is to select the most effective technique among task related techniques using AHP analysis. The result of AHP analysis has shown clear difference in priority among task related techniques in terms of work efficiency of the shipbuilding enterprise: The reduction of normal time is more important than the reduction of allowance time in improving of the work efficiency. Motion & time study is the most important technique for the reduction of normal time, and physical environment improvement is the most important technique for the reduction of allowance time as well.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.10-17
• /
• 2016

When a planing hull straightly runs and turns, its floating position and pitch angle are changed depending on its speed, and large transient motion happens. In this paper, six degrees of freedom(6 DOF) equations of motion, which could simulate the motion of a planing hull, are established. Static and dynamic forces in vertical plane are modeled using pre-calculated displacements and metacentric heights depending on various draft, lift under bottom, and vertical damping coefficients which are used to tune the final motion. Hydrodynamic coefficients in horizontal plane at various equilibrium state are calculated by using Lewandowski's empirical formula and the speed-dependent equilibrium state are calculated beforehand by Savitsky's formula. The speed effects are considered by curve-fitting the coefficients at various speed to the polynomials. Accelerating, decelerating and backing, turning, and zig-zag are simulated and compared with the sea trial results, and it is confirmed that the speed reduction, roll, and pitch during such maneuvers of sea trial and simulation are well consistent.