• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1222-1230
• /
• 2009

A theoretical model was developed to compute the effect of a bubble layer in reducing the radiation noise generated by a force applied on an infinite flat plate considering the noise of multi-bubbles. Using the model, the effectiveness of a bubble layer in reducing the structure-borne noise of the plate was evaluated to consider various parameters such as the source noise levels, the thickness of bubble layers, the volume fractions and the frequency characteristics of bubbly fluids. Considering the noise of multi-bubbles, the actual reduction effect of radiation noise using a bubble layer was expected in cases of high source levels, high volume fractions of bubbles and large thickness of the bubble layer above the resonance frequency of the bubble layer. Accordingly, it is recommended that the thickness of a bubble layer, the source noise level and the characteristics of bubbly fluids should be optimized cautiously to maximize noise reduction effects.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.168-176
• /
• 2007

The mixture sound speed in bubbly fluids is highly dispersive due to differences of the density and compressibility between bubbles and fluids. The dispersion range in bubbly fluids expands to a higher frequency than the resonance frequency of an air bubble. A theoretical model was developed to compute the reduction of radiation noise that is generated by a force applied on an infinite flat plate using a bubble layer as a compliant baffle. For evaluating the effectiveness of a bubble layer in reducing the structure-borne noise of an infinite elastic plate, the noise reduction levels for various parameters such as the thickness of bubble layers, the volume fractions and the distribution types of bubbly fluids are calculated numerically. The noise reduction effect of an air bubble layer on an infinite flat plate is considerable level and similar to the tendency of dispersion of bubbly fluids. It is recommended that the thickness of a bubble layer should be increased with keeping an appropriate volume fraction of an air bubble for the most effective reduction of the radiation noise.

• 소음진동
• /
• 제8권1호
• /
• pp.112-121
• /
• 1998

In this report, Experimental analysis for main factors and analyzing methods of electro-magnetic noise and no loading noise was conducted because of noise of AC generator, which is peripheral equipment by reduction of engine noise that would be the main cause of vehicle radiation noise. In addition, This is intended to suggest the noise reduction development basis of AC generator for actual fan and electro-magnetic noise by making-analyzing-testing it's sample.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.439-447
• /
• 2008

One of the key elements in efforts to minimize noise radiation from a powertrain is the knowledge of the main radiating component and the relation between the surface vibration of a powertrain and the sound pressure. In this research, the powertrain model is developed based on FEM(finite element method). This model is applied to the prediction of the vibration of a powertrain by using ADAMS and the radiation noise by using BEM(boundary element method). According to this numerical analysis, the surface vibration of a powertrain is investigated as a source of radiated noise. This surface vibration is caused by the 1st order natural vibration of the cylinder block and its mode shape is the torsion mode. Therefore, this mode shape is modified to reduce the surface vibration of the powertrain. The radiation noise of the modified powertrain is also reduced to $5{\sim}12\;dB$. This modification is very successful for the noise reduction based on the CAE technology.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2844-2850
• /
• 2015

철도의 운행으로 인하여 발생하는 다양한 소음 중 큰 부분을 차지하고 있는 전동소음의 경우 차륜과 레일의 접촉에 의하여 진동과 이로 인한 소음방사가 발생하므로, 레일 진동에 대한 특성과 이로 인한 방사소음과의 상호연관성 및 특성의 파악이 필요하다. 본 연구에서는 레일의 유한요소 모델을 구성하고 경계요소법을 이용하여 진동으로 인해 발생하는 소음방사를 예측하였다. 입력으로는 레일에서의 진동속도 계측치를 이용하였고 소음방사 예측결과를 계측결과와 비교하여 해석기법의 신뢰성을 검증하였다. 또한 레일 감쇄 특성에 따른 소음방사 특성을 주파수 영역에서 검토하여 레일 댐핑재의 적용에 따라 약 3dB(A)의 방사소음 저감 효과가 있음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.134-137
• /
• 2014

The noise reduction performance of a passive facility is dependent on the its length or volume. In other words, this means that the larger the size of passive facility is, the better the noise reduction performance is. The sound directivity control has been proposed as an alternative for the noise reduction without a passive facility. The purpose of this study is to investigate the correlation between the flange attached to inclined exit of the tube and sound directivity when the sound radiates from the tube to the outside. As a result, the sound radiated from flanged tube had weak sound directivity in the wide angle. Also as the flange was bigger, the sound pressure level was lower in the behind the flange.

• 소음진동
• /
• 제9권1호
• /
• pp.189-195
• /
• 1999

The noise radiated by the rotary compressor for a room air-conditioner was investigated experimentally. Noise characteristics and structural eigen modes of the compressor were identified through sound tests and modal tests each other. From these tests. we found that the accumulator has a big contribution to the noise radiation. So, various structural modifications for the accumulator were performed and these modification methods were found efficient to the noise reduction from verification tests.

• 한국소음진동공학회논문집
• /
• 제25권11호
• /
• pp.747-752
• /
• 2015

Underwater radiated noise is an important characteristic in the naval weapon systems. It is difficult to measure the radiation efficiency of underwater vehicle, such as UUV(unmanned underwater vehicle) and underwater weapons in real operation environment. In this study, acoustic radiation efficiency of a circular cylindrical structure is measured in the laboratory-water tank. The radiation efficiency is compared with the numerical results and it is found that they are in a good agreement. Therefore, the measurement method can be applied effectively for predicting the underwater radiation noise and effectiveness of radiation reduction means.

• 환경영향평가
• /
• 제23권1호
• /
• pp.29-37
• /
• 2014

Exact and precise noise measurement is the basis for the reduction measure R&D, impact assessment and prediction modeling for railway noise. In this study, research trend as well as national and international noise measurement standard are investigated. For the estimation of vertical radiation characteristics of railway noise, specially devised zig was used. From the noise measurement and analysis, exact noise height radiated from the railway was characterized. The obtained results will be used for the suggestion of the height of microphone position of railway noise measurements.

• 한국전자파학회논문지
• /
• 제14권3호
• /
• pp.233-238
• /
• 2003

고속 회로의 발전과 함께 고주파 잡음의 발생 가능성이 커지고, 이러한 시스템의 잡음 억제를 위해 다중 접지(multipoint ground)가 사용되고 있다. 이 가운데 스크류를 이용한 인쇄회로기판의 접지는 인접 스크류들 사이에 접지 루프를 형성하여 방사잡음을 유발한다. 본 논문에서는 이러한 문제를 해결하기 위하여 기구물(chassis)에 대한 인쇄회로기판의 접지 구조를 제안하였다. 제안된 구조는 전파흡수체와 전도성 구리 테이프를 이용해서 전파 흡수량을 증가시킨 것이다. 1~3 ㎓대역에서 기판의 방사 잡음을 측정한 결과, 제안된 접지 구조는 스크류 접지 구조에 비해 2 ㎓ 이하의 대역에서 방사 잡음이 2.62 dBuV/m 감소되었다.