• Journal of Climate Change Research
• /
• v.8 no.3
• /
• pp.247-255
• /
• 2017

In this study, GHG inventory on 17 local government between 2005 and 2014 is build up using 'GHG emission estimation guideline (2016. 2) for local government' developed and distributed by KECO. This covers all the sectors should be included in national GHG inventory, which are energy, industrial process, agriculture, AFOLU, and waste. In addition, six GHGs, carbon dioxide, metane, nitrous oxide, hydrofluorocarbons, perfluorocarbons, sulphur hexafluoride declared in Kyoto protocol are estimated to reflect utmost precision. Indirect esissions, such as electricity, heat and waste generation are separately estimated as well as direct emissions to help local government to establish substantial and implementable reduction measures of GHGs.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.885-892
• /
• 2011

In this study, LCA(Life Cycle Assessment) on 'Saemangum CSO Project' was carried out to evaluate environmental impact which occurred during the construction and operation periods and the potential environmental impact reduction was analyzed by comparing production and reduction level of pollution loads. LCA was conducted out according to the procedure of ISO14040 which suggested Goal and Scope Definition, Life Cycle Inventory Analysis, Life Cycle Impact Assessment and Interpretation. In the Goal and Scope Definition, the functional unit was 1 m3 of CSO, the system boundary was construction and operation phases, and the operation period was 20 years. For the data collection and inventory analysis, input energies and materials from civil, architecture, mechanical and electric fields are collected from design sheet but the landscape architecture field is excepted. LCIA(Life Cycle Impact Assessment) was performed following the procedure of Eco-Labelling Type III under 6 categories which were resource depletion, eutrophication, global warming, ozone-layer destruction, and photochemical oxide formation. In the result of LCA, 83.4% of environmental impact occurred in the construction phase and 16.6% in the operation phase. Especially 78% of environmental impact occurred in civil works. The Global warming category showed the highest contribution level in the environmental impact categories. For the analysis on potential environmental impact reduction, the reduction and increased of environmental impact which occurred on construction and operation phases were compared. In the case of considering only the operation phase, the result of the comparison showed that 78% of environmental impact is reduced. On the other hand, when considering both the construction and operation phases, 50% of environmental impact is increase. Therefore, this study showed that eco-friendly material and construction method should be used for reduction of environmental impact during life cycle, and it is strongly necessary to develop technology and skills to reduce environmental impact such as renewable energies.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.49-57
• /
• 2012

The reduction of greenhouse gas emission currently becomes more urgent task for Korean Industries, especially for the paper industries because of the new regulation based on the low carbon-green growth law. In order to reduce effectively the greenhouse gas emission, the development of greenhouse gas emission inventory has been widely considered as one of the basic processes and has been applied to many industries. In this study, the fundamental schemes and the cases of greenhouse gas inventories were investigated. Especially, the major considering units for paper industries were suggested to develope greenhouse emission inventory of paper industry.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.2
• /
• pp.263-276
• /
• 2004

According to the annual emission estimates of U.S.A., fugitive dust, the particulate matter entrained in the ambient air which is caused from man-made or natural activities such as movement of soil, vehicles, equipments and windblown dust, contributes 90% of PM$_{10}$ emission. In spite of an importance of fugitive dust emission in PM$_{10}$ estimation, it is excluded in the national emission inventory of Korea so far. In this paper, an emission inventory of fugitive dust for each region and in major cities throughout the country, which is the first time in Korea these values have been compiled, is presented. Sources of fugitive dust emission have been classified into paved/unpaved roads, construction operations, agricultural operations, and natural sources. The emission factors of the existing fugitive dust emission were reassessed in a way that significantly improved the reliability of the estimated result. The Korea's first national emission inventory of fugitive dust by administrative districts proposed in this paper would provide scientific reference data for establishing an reduction strategy of PM$_{10}$ and preparing effective control measures, and would contribute to academic achievement in the atmospheric environments field and the establishment of CAPSS (Clean Air Policy Support System).stem).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.121-126
• /
• 1994

Setup Time Reduction is an important aspect of the Just-in-Time(JIT) and Zero Inventory(Zl) Concepts since it supports reductions in manufacturing lead times and inventories. It also enables small lot sizes and kanban systems implementation for material flow - achieving major improvements in production floor management. One concept fundamental to the pursuit of JIT production in Japan and other countries is adoption of a setup time reduction. This paper looks at the necessities of setup time reduction and the relations to machine utilization. By using an EOQ model for evaluate the effect of setup time reduction, we get the results that over 75 % reduction in setup time is obtain the desired results in the lot size reduction.

• Journal of Families and Better Life
• /
• v.19 no.6
• /
• pp.95-112
• /
• 2001

The purpose of this study was to develop an Imaginary Audience Reduction Program and examine the effectiveness of using the program on improving female adolescents' self-esteem. Based on the results from the study, 10-session-Imaginary audience reduction program was developed. Then the researcher conducted the Imaginary Audience Reduction Program for 72 female adolescents from 4, May 2000 to 7, July 2000 at the girls'middle school in Daegu. For examining the effectiveness of using the program, the research instruments were Self-Esteem Inventory(SEI; Coopersmith, 1967) and New Imaginary Audience Scale(NIAS; Lapsley, FitzGerald, Rice & Jackson, 1989). The research instruments used for pre-post-follow up tests. The Data were analyzed by Repeated Measure ANOVA. There were statistically significant differences in self-esteem and Imaginary audience. Results revealed that adolescents who took the Imaginary Audience Reduction Program consistently reported the improvement of their self-esteem level and the reduction of their Imaginary audience level. The implication of study findings will be discussed.

• Management Science and Financial Engineering
• /
• v.13 no.2
• /
• pp.117-139
• /
• 2007

This paper contributes by incorporating works addressing supply chain coordination and investing in setup reduction program. Consider a two-echelon, EOQ-like inventory system consisting of a supplier and a buyer. We assume that both the supplier and the buyer can invest in setup cost reduction programs in order to benefit from small order sizes. However, the costs of investing in setup cost reduction programs are different for the two parties, leading to mismatches in individually optimal setup costs and order cycle times. We propose a supply chain coordination contract that makes use of quantity discount as an incentive transfer scheme for supply chain coordination.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.15-42
• /
• 1998

A joint problem of order delivery, setup reduction, and cost-sharing in a two-echelon inventory system in which a vendor supplies multiple products to a group of buyers is studied here. The basic premise is that buyers have independently implemented setup reduction programs to acquire benefits from small order sizes. Doing so, however, causes the buyers' individually optimal order cycles to be differ from that of the vendor. In conjunction with this, two models are considered. In the first model, a multi-buyers single product situation is considered in which the vendor implements a joint supply cycle policy. However, buyers, as the dominant party, insist after implementing the individually optimal setup reduction that the vendor accept their individually optimal order schedules. In the second model. a multi-products, single buyer situation is considered in which the buyer implements a joint order policy. Here, the vendor, as the dominant party, refuses to cooperate fully with the buyer's individually reduced joint order schedule, and designs his own individually optimal setup reduction mix for each product under a given budget constraint. This led to a study of an integrated Setup Reduction/Break-even Pricing Policy for each situation to eliminate mismatches in individually optimal cycle times.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.2
• /
• pp.171-178
• /
• 2014

After the expiration of operating license of a plant, all infrastructures within the plant must be safely dismantled to the point that it no longer requires measures for radiation protection. Despite the fact that Kori 1 and Wolsong 1 are close to the expiration of their operating license, sufficient technologies for radiological characterization, decontamination and dismantling is still under development. The purpose of this study is to develop one of methods for radiological inventory assessment on measuring object by using direct measure of large component with In-Situ measurement technique. Radiological inventory was assessed by analyzing nuclide using portable gamma spectroscopy without dismantling reactor head, and the result of direct measurement was supplemented by performing indirect measurement. Radiochemical analysis were performed on surface contamination samples as well. During the study, radiological inventory of reactor vessel calculated expanding the result. Based on the result and the radioactivity variation of each radionuclides time frame for decommissioning can be decided. Thus, it is expected that during the decommissioning of plants, the result of this study will contribute to the reduction of radiation exposure to workers.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.53-64
• /
• 2001

The purpose of this study is to create the program for efficient inventory management and reduction, investigating the present conditions and factors of the inventory throughout current apparel industry. The research method applied in this study is to survey 92 domestic companies which were randomly selected with respect to the kinds of goods produced : men′s wear, women′s wear, and unisex wear. The research can be summarized as follows : 1. The seasonal stock rate of current apparel industry was 28.75%, and the rate of men′s wear companies was higher than that of women′s and unisex wear companies. 19.43% of stock cost reflection rate was applied, and the stack cost of men′s and women′s wear companies was higher than that of unisex wear companies. 2. Periodic bargain sale was the most frequently used way of stock clearance, and "uniform price sale"and outlet stores were the second and the third irrespectively. Unisex wear companies appeared to be more enthusiastic in stock clearance than the companies belonging to the other two categories. The main places for the stock clearance were department stores, outlet stores and enterprises specialized in the stock clearance. 3. QR production was proved to be the most commonly adjusted method of stock reduction, and the emphasis on development of new design and the utilization of stock management system through computer network were the next, While unisex wear companies had established the positive policies, men′s wear companies took lukewarm altitudes in every aspect. The companies selling on an order were 18.64%, and unisex wear companies showed the higher rate. The lead-time after QR production was 10.91 days, and it seemed to take more time for men′s wear companies than for women′s and unisex wear companies. The rate of the chance in stock was proved to decrease by 12.94%, and there was found no meaningful difference among the three categories of apparel companies.