• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.91-100
• /
• 2007

This study suggests direct connection service which has advantage of high-speed operation of KTX and access convenience of general train, and Pre-feasibility studies on the direct connection service. And analyze transportation demand change by the method as follows; It is to analyze the demand change of before and after KTX operation by previous transport data of Gyeongbu line, and calculate the coefficient of utilization using triggering demand by opening the 2nd phase of Gyeongbu line (Dongdaegu${\sim}$Busan). Through Pre-feasibility analysis, reduction $70{\sim}100$ minutes of train travel time and total revenue will increase about $100 thousand per day. Also, there will be environment-friendly effects of decreasing $CO_2$ emissions. But, Direct connection service need to highly cost ; Buying and Operation cost of KTX train. Therefore, we will be get more correct result of Pre-feasibility study on direct connection service, if there are concrete on buying the KTX action plans.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.253-258
• /
• 2012

Activated magnetite ($Fe_3O_{4-{\delta}}$) was applied to reducing $CO_2$ gas emissions to avoid greenhouse effects. Wet and dry methods were developed as a $CO_2$ removal process. One of the typical dry methods is $CO_2$ decomposition using activated magnetite ($Fe_3O_{4-{\delta}}$). Generally, $Fe_3O_{4-{\delta}}$ is manufactured by reduction of $Fe_3O_4$ by $H_2$ gas. This process has an explosion risk. Therefore, a non-explosive process to make $Fe_3O_{4-{\delta}}$ was studied using $FeC_2O_4{\cdot}2H_2O$ and $N_2$. $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$ were used as starting materials. So, ${\alpha}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method. During the calcination process, $FeC_2O_4{\cdot}2H_2O$ was decomposed to $Fe_3O_4$, CO, and $CO_2$. The specific surface area of the activated magnetite varied with the calcination temperature from 15.43 $m^2/g$ to 9.32 $m^2/g$. The densities of $FeC_2O_4{\cdot}2H_2O$ and $Fe_3O_4$ were 2.28 g/$cm^3$ and 5.2 g/$cm^3$, respectively. Also, the $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by CO. From the TGA results in air of the specimen that was calcined at $450^{\circ}C$ for three hours in $N_2$ atmosphere, the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was estimated. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was 0.3170 when the sample was heat treated at $400^{\circ}C$ for 3 hours and 0.6583 when the sample was heat treated at $450^{\circ}C$ for 3 hours. $Fe_3O_{4-{\delta}}$ was oxidized to $Fe_3O_4$ when $Fe_3O_{4-{\delta}}$ was reacted with $CO_2$ because $CO_2$ is decomposed to C and $O_2$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.75-83
• /
• 2019

In order to fulfill the obligation to voluntarily reduce greenhouse gas emissions under the Paris Climate Agreement, the proportion of coal and nuclear power generation is reduced worldwide and national efforts are being made to spread renewable energy including solar power generation. Korea also intends to increase the proportion of renewable energy generation to 30~35% by 2040 by introducing laws and regulations. In addition, while the country is trying to apply solar power generation to sidewalks and roads, there is no research related to it in Korea. Therefore, as a precedent study to develop solar power generation roads, solar power generation concrete blocks applicable to sidewalks and plazas were developed and the applicability was evaluated by constructing them on the site. As a result of indoor experiment, compressive strength was measured by 25.5~35.7MPa and flexural strength was measured by 5.1~10.5MPa, which showed that all domestic standards were satisfied. However, the higher the unit cement amount, the lower the strength was measured according to the mixing of the broken fine aggregate. The absorption rate was 5.7%, which satisfied the domestic standard of 7% or less. As a result of the freeze-thawing test, the reduction rate of the compressive strength after 100 cycles was up to 6.3%. As a result of measuring the settlement amount after construction, the maximum of 2.498mm was measured and irregular settlement occurred in the overall area, which is because the resolution of the sand layer was poor during construction. Maintenance techniques of sidewalk concrete block and solar panel need to be established more efficiently through long-term operation in the further.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.15-23
• /
• 2013

Purpose - This is a case study aimed at finding a solution for improving the pallet loading efficiency in the process of delivering products through a transshipment using the T-11 and T-12 pallet systems. The study proposes a solution by demonstrating the case of a certain manufacturer A, who aims to reduce the logistics cost by using packaging sizes that are commonly applicable and can improve the compatibility between the T-11 pallet system, designated as the standard pallet in Korea, and the T-12 pallet system, which is commonly used in other foreign countries. The use of common sizes increases compatibility among the two systems and reduces both logistics and environmental costs. Thus, this case study calculates the quantitative benefits of applying common packaging sizes to improve the compatibility between the T-11 and T-12 pallet systems. These systems are considered to be the most important and widely used transportation systems in the global logistics industry. Research design, data, and methodology - This study examined manufacturer A's representative product and delivery system and assessed how manufacturer A was affected by the use of incompatible packaging sizes in the T-11 (1100 mm×1100 mm) and T-12 (1200mm×1000 mm) pallet systems, which were specified in the KS T 1002 standard. In addition, this study analyzed the impact of these packaging sizes on A's logistics cost. The TOPS program (Total Packaging System) was used to simulate pallet loading efficiency,and the main parameter studied was volume, as calculated from length, width, and height. Results - When the sizes of secondary packaging were not compatible across the T-11 and T-12 pallet systems, a reduction in loading efficiency was observed, leading to an increase in logistics cost during transshipment. Such low loading efficiencies led to a further loss of efficiency in transportation, storage and unloading. This may have a possible environmental impact with high social expenses, such as increased CO₂ emissions. Hence, this study proposed that the KS T 1002 standard be amended to include 21 packaging sizes, including 7 sizes of the 600 mm×500 mm category, which are compatible with both the T-11 and T-12 pallet systems. Conclusions - This study found that the 69 standard sizes under the T-11 pallet system and the 40 standard sizes under the T-12 system in the KS T 1002 standard can be simplified and reduced to 21 mutually compatible packaging sizes, enabling logistics standardization and reducing national-level logistics costs. If the government pays attention to this study and considers the standardization of common sizes for the T-11 and T-12 pallet systems and amends the KS T 1002 standard, this study will deliver practical value to the global logistics industry, apart from being of academic significance.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.239-248
• /
• 2006

Improvements in understanding the effects of dietary fermentable carbohydrates and their interaction with supplemental feed enzymes and the feed manufacturing process may lead to reductions in volatile organic compound (VOC) emissions from poultry manure. Starch digestibility has been improved by replacing ground wheat or barley with whole wheat or barley, but there was no consistent effect of cereal species or feed form on the pH value of the gizzard contents. Pelleting results in improvements in feed conversion from 0 to 12%. Starch digestibility has been reported to account for up to 35 % of the improvement in available metabolic energy as a result of xylase supplementation. Factors which affect starch utilization and non-starch polysaccharide (NSP) absorption include the presence of anti-nutrient facto. (ANF) in grains, the nature of grain starch, NSP and the digestive capacity of animals. Improvements in feed production technology have been made in enzyme stabilization, allowing some dry enzyme products to be pelleted after conditioning at up to $87.69^{\circ}C$ and liquid enzymes to be stored in the feed mill for up to low months prior to use. The soluble NSP, arabinokylans and beta-glucans are partially degraded into smaller fragments by enzymes. With fragmentation, the water holding capacity is decreased, which leads to a reduction in digesta moisture, wet feces, and dirty eggs from hens fed diets containing viscosity-inducing ingredients.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.357-368
• /
• 2018

For well over 100 years, oil has enabled remote communities to generate electricity and enjoy the benefits of a consistent electrical supply. Relying solely on oil for electricity generation has left island and remote communities exposed to several risks and drawbacks. Oil-based electricity generation is often more expensive and subject to price volatility, which can result in the use of risky fuel hedging strategies. The residents of islands and remote communities express concern over the future impacts of climate change or insist on their opinions for the corresponding action with reduction of carbon emissions. These risks and drawbacks can be overcomed with continuing cost reductions in solar, wind, and energy storage technologies by maker. Reducing costs is not always a straightforward process, relying on more diversely and renewably arranged renewable energy sources led to reduced local construction cost in every situation reviewed in this study. In this paper, a convenient and simple design solution which will facilitate the optimum location and transmission route of renewable energy facility using GIS(Geographic Information System) is proposed. The suggested solutions exercised to the case of geomoon island using GIS and identified by local site survey.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.317-324
• /
• 2020

Combined cycle power plants (CCPP) that use natural gas as fuel are easier to start and stop, and have lower pollutant emissions, so their share of domestic power generation facilities is steadily increasing. However, CCPP have a high concentration of nitrogen dioxide (NO2) emission in the initial start-up and low-load operation region, which causes yellow plume and civil complaints. As a control technology, the yellow plume reduction system was developed and operated from the mid-2000s. However, this technology was unable to control the phenomenon due to insufficient preheating of the vaporization system for 10 to 20 minutes of the initial start-up. In this study, CFD analysis and demonstration tests were performed to derive a control technology by injecting a reducing agent directly into the gas turbine exhaust duct. CFD analysis was performed by classifying into 5 cases according to the exhaust gas condition. The RMS values of all cases were less than 15%, showing a good mixing. Based on this, the installation and testing of the demonstration facilities facilitated complete control of the yellow plume phenomenon in the initial start-up.

• Environmental and Resource Economics Review
• /
• v.30 no.1
• /
• pp.129-167
• /
• 2021

The emission trading system is an essential policy for reducing greenhouse gas emissions and converting low-carbon society. EU ETS is a good benchmark that is ahead of Korea's emission trading system in terms of operating period and design know-how. Therefore, this study focused on the key design elements of EU ETS phase 4 such as total emission allowances issued (Cap), free allocation method, carbon leakage list, market stability reserve, and innovation supporting system. In addition, we analyzed the impact of key design elements and their changes during EU ETS Phase 1 to 4 on the design and operation of Korea emission trading system in the future. First of all, the expected impact on the design of Korea emission trading system is to increase three demands: preparing benchmark renewal plans, establishing criteria for selecting free allocation industries that reflect domestic industrial structure and characteristics and introducing two-stage evaluations for free allocation industries, and preparing specific plan to support innovation and industries using allowance auction revenues. The next three impacts on the operation of Korea emission trading system are the increased needs for objective and in-depth impact assessment of plan and amendments, provision of system stability and response opportunities by quickly confirming plan and amendments prior to the implementation, and coordination of the emission trading system governance and stakeholder participation encouragement.

• Journal of Industrial Convergence
• /
• v.21 no.7
• /
• pp.19-27
• /
• 2023

As the secondary battery market expands, the process of producing laterite ore using the rotary kiln and electric furnace method is expanding worldwide. As ESG management expands, the management of air pollutants such as nitrogen oxides in exhaust gases is strengthened. The rotary kiln, one of the main facilities of the pyrometallurgy process, is a facility for drying and preliminary reduction of ore, and it generate nitrogen oxides, thus prediction of nitrogen oxide is important. In this study, LSTM for regression prediction and LightGBM for classification prediction were used to predict and then model optimization was performed using AutoML. When applying LSTM, the predicted value after 5 minutes was 0.86, MAE 5.13ppm, and after 40 minutes, the predicted value was 0.38 and MAE 10.84ppm. As a result of applying LightGBM for classification prediction, the test accuracy rose from 0.75 after 5 minutes to 0.61 after 40 minutes, to a level that can be used for actual operation, and as a result of model optimization through AutoML, the accuracy of the prediction after 5 minutes improved from 0.75 to 0.80 and from 0.61 to 0.70. Through this study, nitrogen oxide prediction values can be applied to actual operations to contribute to compliance with air pollutant emission regulations and ESG management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.519-531
• /
• 2020

Global warming is accelerating as greenhouse gas emissions increase owing to the increase in population and urbanization rates worldwide. As an alternative to this solution, smart cities are being promoted. The purpose of this paper is to suggest a plan for developing energy service modules for the Sejong 5-1 living area, which has been selected as a test-bed for smart cities in Korea. Based on the smart city plans announced by the government for this study, a survey questionnaire on 12 energy services was composed by collecting the opinions of experts. The survey was conducted with 1,000 citizens, the degree of necessity of energy service that citizens think of was identified. Principal Component Analysis and Association Rule Mining were conducted to describe 12 energy service items in a reduced manner and analyze the correlation and relationship of each energy service. Finally, three modules were suggested using the analyzed results so that 12 energy services could be implemented in an efficient platform. These results are expected to contribute to the realization of a smart city to make them easily accessible for those who want to promote platform services in the energy field and envision energy service items.