• Phonetics and Speech Sciences
• /
• v.10 no.4
• /
• pp.77-89
• /
• 2018

Speech articulators are coordinated for the purpose of segmental constriction in terms of a task. In particular, vertical jaw movements repeatedly contribute to consonantal as well as vocalic constriction. The current study explores vertical jaw movements in conjunction with bilabial constriction in bilabial stop /p/ in the context /a/-to-/a/. Revisiting kinematic data of /p/ collected using the electromagenetic midsagittal articulometer (EMMA) method from seven (four female and three male) speakers of Seoul Korean, we examined maximum vertical jaw position, its relative timing with respect to the upper and lower lips, and lip aperture minima. The results of those dependent variables are recapitulated in terms of linguistic (different word boundaries) and paralinguistic (different speech rates) factors as follows. Firstly, maximum jaw height was lower in the across-word boundary condition (across-word < within-word), but it did not differ as a function of different speech rates (comfortable = fast). Secondly, more reduction in the lip aperture (LA) gesture occurred in fast rate, while word-boundary effects were absent. Thirdly, jaw raising was still in progress after the lips' positional extrema were achieved in the within-word condition, while the former was completed before the latter in the across-word condition. Lastly, relative temporal lags between the jaw and the lips (UL and LL) were more synchronous in fast rate, compared to comfortable rate. When these results are considered together, it is possible to posit that speakers are not tolerant of lenition to the extent that it is potentially realized as a labial approximant in either word-boundary condition while jaw height still manifested lower jaw position in the across-word boundary condition. Early termination of vertical jaw maxima before vertical lower lip maxima across-word condition may be partly responsible for the spatial reduction of jaw raising movements. This may come about as a consequence of an excessive number of factors (e.g., upper lip height (UH), lower lip height (LH), jaw angle (JA)) for the representation of a vector with two degrees of freedom (x, y) engaged in a gesture-based task (e.g., lip aperture (LA)). In the task-dynamic application toolkit, the jaw angle parameter can be assigned numerical values for greater weight in the across-word boundary condition, which in turn gives rise to lower jaw position. Speech rate-dependent spatial reduction in lip aperture may be able to be resolved by means of manipulating activation time of an active tract variable in the gestural score level.

• East Asian mathematical journal
• /
• v.30 no.3
• /
• pp.321-326
• /
• 2014

In this paper, we present a simple proof of Corollary 3.3 in [5] using the fact that for a K3 surface of finite height over a field of odd characteristic, the height is a multiple of the non-symplectic order. Also we prove for a non-symplectic CM K3 surface defined over a number field the Frobenius invariant of the reduction over a finite field is determined by the congruence class of residue characteristic modulo the non-symplectic order of the K3 surface.

• Korean Journal of Breeding Science
• /
• v.43 no.5
• /
• pp.391-398
• /
• 2011

Physiological responses to salinity stress were evaluated in six rice genotypes differing in their tolerance to salinity at the seedling stage. Susceptible genotypes ('Dongjingbyeo', 'Hwayeongbyeo', and 'IR29') showed salt injury symptoms (mean 8.8) and higher visual score under salt stress than that of tolerant ones ('Pokkali', 'IR74009', and 'IR73571'). As salinity affects growth and physiological parameters, the six genotypes thus showed significant reduction because of salt stress. Tolerant Japonica/Indica bred lines ('IR74009', 'IR73571') showed lower reduction, 33.9%, 34.5%, and 50%, respectively, in plant seedling height, dry shoot weight and dry root weight than those of the susceptible Japonica varieties ('Dongjingbyeo', 'Hwayeongbyeo'), and the highest reduction under salt stress was observed in dry root weight, followed by dry shoot weight and seedling height, respectively. Shoot $Na^+$ concentration of IR74099 and IR73571 was lower than that of the susceptible varieties, 'Dongjinbyeo' and 'Hwayeongbyeo'. There were no significant differences among genotypes in root $Na^+$ concentration. Shoot $K^+$ concentration showed a reverse tendency compared to shoot $Na^+$ concentration. IR74009 and IR73571 had considerably lower ratio compared to 'Dongjinbyeo' and 'Hwayeongbyeo' in $Na^+/K^+$ ratio of their shoot and was not different the tolerant check, 'Pokkali'.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.111-118
• /
• 1984

On the basis of plasticity theory for porous metal, an analysis of ring compression is carried out, employing the upper bound approach. The plastic flowability and the neutral radius of porous metal ring are calculated and deformation characteristics of power forging are obtained from this result. The experiments on ring compression are carried out for sintered iron porous metal with various relative densities under various friction conditions. A good agreement is observed between the shapes of the calculated curves and the experimental results from the ring compression test. The friction factor for powder metal forming can be determined not only from the relationship between reduction in height and reduction in internal diameter but independently from the relationship between reduction in height and relative density, if the initial relative density is known.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.497-504
• /
• 2017

This paper proposes a method to measure the airburst height by utilizing a high speed camera. This method might be applied to the test of which flight target is alive after the burst. The proposed method consists of four main steps. The first step is to compute the impact point using the sea surface height. The second step is to compute the height of burst (HOB) by using the distance from the camera to the impact point. This could be different from the real explosion height. That is because the distance from the camera to the burst point is not the same as it from the camera to the impact point. Therefore, the third step is to calculate the approach angle of the flight target with respect to the installed camera. Then, the last step is to compensate the computed height by using the approach angle. The result of the proposed method is compared with it from the triangulation. In this paper, the HOB error is also analyzed regarding the approach angle difference. Based on this analysis, the camera position might be suggested for error reduction.

• Atmosphere
• /
• v.17 no.4
• /
• pp.315-326
• /
• 2007

The effects of windbreaks on the reduction of suspended particles are investigated using a computational fluid dynamics (CFD) model with the ${\kappa}-{\varepsilon}$ turbulence closure scheme based on the renormalization group (RNG) theory. In the control experiment, the recirculation zones behind the storage piles are generated and, as a whole, relatively monotonous flow patterns appear. When the windbreaks with the 0% porosity are constructed, the recirculation zones are generated by the windbreaks and very complicated flow patterns appear due to the interference between the windbreaks and storage piles. The porosity of the windbreaks suppresses the generation of the recirculation zone and decreases the wind velocity in the windbreaks as well as that outside the windbreaks. As the emission of suspended particles from the storage piles are closely related with the friction velocity at the surfaces of the storage piles, variation of the friction velocity and total amount of the emission of the suspended particles with the height and porosity of the windbreaks are investigated. The results show that higher and more porous windbreaks emit less suspended particles and that the reduction effect of the porosity is still more effective than that of the height. In the case of the windbreak with 30 m height and 50% porosity, friction velocities above the storage piles are smaller than the critical friction velocity above which particles would be suspended. As a result, total amount of suspended particles are much fewer than those in other cases.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.23-27
• /
• 2019

People's interest in the environmental problems of the Earth is growing as they come to the modern world, and research is being actively conducted on how to protect the environment. As a result, the automobile industry, one of the causes of environmental pollution, is also affected. Therefore, research is being conducted to improve the fuel economy and light weight of cars, development of pollution-free cars such as electric cars, and aluminium materials that are lighter than ordinary steel sheets and easier to recycle are gaining attention. In this experiment, the material was formed to form a form of aluminium and the material reduction rate of the side wall of the foam was tested according to the amount of side wall. The material used in the experiment was A3003-O, which is less plastic than normal steel plates, but has excellent corrosion resistance, plasticity and weldability compared to aluminium materials, but has poor tensile strength. For tensile testing, a certain array of Forming Shapes was molded and the height of the Forming was set to 5mm, and the height of the Forming was 4.7mm, indicating that the difference between the first 5mm Forming and the height was not large. In addition, the material reduction rate was tested by giving 15, 0, and -0.15 teas, respectively, and was found to be valuable as a product only for -0.15.

• Journal of Korea Foresty Energy
• /
• v.19 no.1
• /
• pp.7-12
• /
• 2000

This study was carried out to investigate the effect of light intensity on the growth and biomass production of Pinus thunbergii seedlings. The experiment was performed under five different light intensities such as 100, 50, 30, 10, and 25 of the natural full sun light intensity for 2 year in the field condition. The seedling showed the highest height and root collar diameter growth under natural full sun light. The height growth of the seedling under 50% of light intensity showed 96.4% of the control seedling in the first year, and 88.9% in the second year, and the root collar diameter growth showed 94.1% in the first year 77.6% in the second year. Height and root collar diameter growth was markedly reduced below 30% of relative light intensity, and the reduction rate of root collar diameter growth was higher than that of height growth. All the tested seedlings died under 2% of relative light intensity in the second year. Biomass production was also reduced by decreasing of relative light intensity, the reduction rate of root biomass production in both first and second years was higher than that of leaf or shoot biomass production. The lowest reduction was observed at the shoot in the first year, and at the leaves in the second year The highest T/R ratio was recorded by 3.55 in the seedling under 50% of relative light intesity in the first year, and by 4.88 under 10% of relative light intensity in the second year.

• Journal of Environmental Impact Assessment
• /
• v.23 no.1
• /
• pp.29-37
• /
• 2014

Exact and precise noise measurement is the basis for the reduction measure R&D, impact assessment and prediction modeling for railway noise. In this study, research trend as well as national and international noise measurement standard are investigated. For the estimation of vertical radiation characteristics of railway noise, specially devised zig was used. From the noise measurement and analysis, exact noise height radiated from the railway was characterized. The obtained results will be used for the suggestion of the height of microphone position of railway noise measurements.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.2
• /
• pp.112-117
• /
• 2007

Objective : Kyphoplasty and vertebroplasty are two minimally invasive procedures for osteoporotic vertebral compression fractures. The purpose of this retrospective study was to compare the radiological findings and clinical outcomes between two procedures. Methods : Osteoporotic vertebral fractures were treated in 76 vertebrae, using kyphoplasty (n=35 vertebrae) and using vertebroplasty (n=41 vertebrae). Fractured vertebral bodies were diagnosed by correlating the clinical symptoms with radiologic study. The responses of pain symptoms were measured by a self-reported Visual Analog Scale (VAS) score. Plain X-rays were checked preoperatively and postoperatively at admission and 6 months. The vertebral body height and kyphotic angle were measured to assess the reduction of the sagittal alignment. Results : The mean pain scores were decreased significantly for both procedures postoperatively, but there were no significant differences between two groups. Kyphoplasty led to a significant reduction of the vertebral body height and improvement of kyphotic angle. There were no neurological deficits after kyphoplasty, but one patient experienced paraparesis after vertebroplasty. During the 6 months follow-up both procedures provided stabilization of the sagittal alignment. Conclusion : Kyphoplasty and vertebroplasty are considered effective minimally invasive techniques for the stabilization of osteoporotic vertebral body fractures, leading to a statistically significant reduction in pain. Kyphoplasty significantly restore sagittal alignment. Also, complications and the incidence of bone cement leakage are significantly lesser than vertebroplasty. Therefore, kyphoplasty seems to be reasonable procedure for osteoporotic vertebral body compression fractures when medical treatment fail.