• 수도
• /
• s.62
• /
• pp.69-79
• /
• 1993

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.491-492
• /
• 1989

• Bulletin of the Korean Chemical Society
• /
• v.25 no.9
• /
• pp.1297-1298
• /
• 2004

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.263-266
• /
• 1999

Tobacco (Nicotiana tabacum L. ‘KF109’) seeds were primed in polyethylene glycol 6000 (PEG 6000) solutions to determine a) what osmotic potential of the solution would be optimal for priming, i.e., critical potential level for preventing germination, and b) what temperature and duration would be the most effective in priming. The germination was completely prevented below -0.8 MPa of PEG 6000, that indicates a optimum water potential for seed priming. Seeds were primed for 0, 1, 2, 3, 5, 10 and 15 days at 15, 20 and $25^{\circ}C$, respectively, under the-0.8 MPa PEG 6000 solution to find out the most effective temperature and duration for priming. The effectiveness of priming, particularly in germination speed, was observed more distinctly when the primed seeds were germinated at 15$^{\circ}C$ than 2 5$^{\circ}C$. The greatest reduction of the time to 50% germination (T/sob 50/) was when the seeds were primed at $25^{\circ}C$. The reduction rate of the $T_{50}$ was rapid when primed from 1 day to 8 days and then slowed down in the seeds primed for longer than 8 days. The time from 10 to 90% germination ( $T_{10-90}$ increased in the primed seeds for longer than 8 days which showed the reversed effect of synchronous germination. However, $T_{50}$ was reduced continuously in the seeds even primed over 8 days. Thus, the optimum condition for tobacco seeds priming with PEG 6000 solution was -0.8 MPa in osmotic potential of the solution at $25^{\circ}C$ for 8 days.ays.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.321-329
• /
• 1999

The effect of water deficits on soybean [Glycine max (L.) Merr.] could appear on seed quality through changes of morphological plant characteristics. Two Korean genotypes, Hwangkeum (determinate growth habit) and Muhan (indeterminate growth habit), were used to examine the influences of treatment stage and method of water deficit during reproductive growth period on yield and seed quality of soybean. Water deficit at R5 or R6 stages was as damaging to seed quality as double water-deficit treatments at R2+R5 or R2+R6. However, seed from double water-deficit treatment tended to have lower oxidation-reduction potential compare to the corresponding single water-deficit treatment. In comparison with Muhan, Hwangkeum had significantly greater oxidation-reduction potential value. Seed yield per plant in both genotypes depended greatly on seed yield of branches. However, the proportion of number of branch seed to total seed umber in Hwangkeum was increased as the water deficit was applied during later reproductive stage, whereas, in Muhan the proportion was lower. Water-deficit treatments including the single and double water-deficit treatments and non-stressed treatment were able to be classified into five groups for Hwangkeum and four groups for Muhan based on the influences on yield components, number of pod, number of seed, and single seed weight, using principal component analysis. In both genotypes, R2+R5 water-deficit treatment decreased number of pod and seed, but increased single seed weight. On the contrary, R6 or R2+R6 stress increased the pod and seed number, but decreased single seed weight.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.245-250
• /
• 2004

The SBR(Sequencing Batch Reactor) process is ideally suited to treat high loading wastewater due to its high dilution rate. SBR operates by a cycle of periods consisting of filling, reacting, settling, decanting and idling. The react phases such as aeration or non-aeration, organic oxidation, nitrification, denitrification and other bio-logical reactions can be achieved in a reactor. Although the whole reactions can be achieved in a SBR with time distributing, it is hard to manage the SBR as a normal condition without recognizing a present state. The present state can be observed with nutrient sensors such as ${NH_{4}}^{+}-N$, ${NO_{2}}^{-}-N$, ${NO_{3}}^{-}-N} and ${PO_{4}}^{ 3-}-P.$ However, there is still a disadvantage to use the nutrient sensors because of their high expense and inconvenience to manage. Therefore, it is very useful to use common on-line sensors such as DO, ORP and pH, which are less expensive and more convient. Moreover, the present states and unexpected changes of SBR might be predicted by using of them. This study was conducted to get basic materials for making an inference of SBR process from ORP(oxidation reduction potential) of synthetic wastewater. The profiles of ORP, DO, and pH were under normal nitrification and denitrification were obtained to compare abnormal condition. And also, nitrite and nitrate accumulation were investigated during reaction of SBR. The bending point on ORP profile was not entirely in the low COD/NOx ratio condition. In this case, NOx was not entirely removed, and minimum ORP value was presented over -300mV. Under suitable COD/NOx ratio which complete denitrification was achieved, ORP bending point was observed and minimum ORP value was under -300m V. Under high COD/NOx ratio, ORP bending point was not detected at the first subcycle because of the fast denitrification and minimum ORP value was under -300mV at the time.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.276-283
• /
• 1977

Reduction of dichromate at a platinum cathode in acid solution was studied by cyclic voltammetry and controlled potential electrolysis. Cathodic polarization curve consisted of three waves in unbuffered solution of potassium dichromate having initial pH ranges 1.5∼4.0, with sodium sulfate as the supporting electrolyte. Relative heights of the first and the second waves were, respectively, a function of chromium (Ⅵ) concentration and activity of hydrogen ion, but that of the third wave was not proportional to both of them. The current of the first two peaks were proportional to the sweep rate of potential (${\nu}$), while that of the last peak vs. ${\nu}^{1/2}$ was linear at the sweep rate of less than 50mV/sec. By the controlled potential electrolysis, the reduction of chromium (Ⅵ) was almost completely suppressed at potentials more negative than the last peak and at initial pH's above ca. 2.3 of unbuffered solution. Therefore, these peaks represented, respectively, $Cr_2O_7^{2-}{\to}Cr^{3+},\;2H^+{\to}H_2$ and the formation of a cathodic film.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.123-130
• /
• 2007

The effects of hydrogen peroxide treatment on the reduction of waterworks sludge were investigated in this study. Sludge treated by peroxidation $H_2O_2$ oxidation) was dewatered using a pressure filter at 3atm. It was observed that $H_2O_2$ treatment at the acidic condition significantly reduce both cake water content and specific resistance to filtration (SRF), indicating the enhancement of dewaterability and filterability. The filterability by hydrogen peroxide treatment at pH 3.5 was better than acidic treatment and became comparable with polymer conditioning. The sludge filterability evaluated by SRF was optimal at a dose 2ml $H_2O_2$/sludge($0.02g\;H_2O_2/gTS$) after adjusting of pH to 3.5. The $H_2O_2$ oxidation at pH 3.5 also produced even more dewatered cake when compared with polymer conditioning. The reduction rate of sludge mass at an optimal condition showed 34% compared with untreated sludge. The effects of peroxidation on sludge properties including zeta potential, bound water and particle size were also evaluated. Peroxidation at the acidic condition reduced both bound water and zeta potential. By $H_2O_2$ combined with sulfuric acid leached iron caused Fenton's reaction, which showed a potential to significantly reduce the amount of solids mass and to produce more compact cake with higher filterability.

• Microbiology and Biotechnology Letters
• /
• v.42 no.3
• /
• pp.238-248
• /
• 2014

The metalloid arsenic (Z = 33) is considered to be a significant potential threat to human health due to its ubiquity and toxicity, even in rural regions. In this study a rural region contaminated with arsenic, located at longitude $85^{\circ}$ 32'E and latitude $25^{\circ}$ 11'N, was initially examined. Arsenic tolerant bacteria from the rhizosphere of Amaranthas viridis were found and identified as Bacillus licheniformis through 16S rRNA gene sequencing. The potential for the uptake and removal of arsenic at 3, 6 and 9 mM [As(V)], and 2, 4 and 6 mM [As(III)], and for the reduction of the above concentrations of As(V) to As(III) by the Bacillus licheniformis were then assessed. The minimal inhibitory concentrations (MIC) for As(V) and As(III) was determined to be 10 and 7 mM, respectively. At 3 mM 100% As(V) was uptaken by the bacteria with the liberation of 42% As(III) into the medium, whereas at 6 mM As(V), 76% AS(V) was removed from the media and 56% was reduced to As(III). At 2 mM As(III), the bacteria consumed 100%, whereas at 6 mM, the As(III) consumption was only 40%. The role of pH was significant for the speciation, availability and toxicity of the arsenic, which was measured as the variation in growth, uptake and content of cell protein. Both As(V) and As(III) were most toxic at around a neutral pH, whereas both acidic and basic pH favored growth, but at variable levels. Contrary to many reports, the total cell protein content in the bacteria was enhanced by both As(V) and As(III) stress.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.472-479
• /
• 2006

In this research, speciation of phosphorus in sediment and overlying water dependent upon pH and ORP(Oxidation Reduction Potential) was studied. Three possible conditions were simulated: open system with circulation, closed system with stratification and closed system with sand capping on the sediment. Phosphorus release rate from sediment was increased for both open system and closed system if pH was less than 6.0. Phosphorus concentration for closed system was increased from 0.9 mg/L to 0.51 mg/L, and stabilized at 0.34 mg/L if anaerobic conditions were maintained in the overlying water. When sand capping was implemented, phosphorus concentrations of overlying water were maintained less than those of closed system.