• 제목/요약/키워드: Reduction Measures

검색결과 1,013건 처리시간 0.025초

광주지역 지하수 중 우라늄과 라돈의 함량 분포 특성 (Distribution Characteristics of Uranium and Radon Concentrations of Groundwater in Gwangju Area)

  • 서희정;민경우;박지영;박주현;황호연;박세일;김선정;정숙경;배석진;김성준
    • 한국환경보건학회지
    • /
    • 제48권2호
    • /
    • pp.86-95
    • /
    • 2022
  • Background: As high concentrations of uranium and radon have been detected in some areas in Korea, it is considered necessary to investigate natural radioactive materials in the Gwangju area. Objectives: This study aimed to identify the hydrochemical characteristics of groundwater in Gwangju and investigate the distribution characteristics of uranium and radon, which are naturally radioactive substances. Methods: To determine the uranium and radon concentrations in groundwater according to the geology of the Gwangju area, we measured 62 groundwater wells. A geological distribution map of uranium and radon content was prepared for this study. Results: The groundwater type, defined using a Piper diagram, was mainly Ca-HCO3. The concentration of uranium in the groundwater ranged from 0 to 29.3 ㎍/L, with a mean of 3.3 ㎍/L and a median of 0.9 ㎍/L. The median concentration of uranium in groundwater was highest in alluvium, granitic gneiss, and biotite granite (classified by geological unit), in that order. The concentration of radon in the groundwater ranged from 4.8 to 313.2 Bq/L, with a mean of 75.6 Bq/L and a median of 59.6 Bq/L. The median concentration of radon in groundwater was highest in biotite granite, alluvium, and granitic gneiss, in that order. As a result of the correlation analysis of groundwater in the study area, there was no significant correlation between uranium and radon. Conclusions: In this study area, uranium was shown to be far below the concentrations allowed by drinking water quality standards, but radon concentrations exceeded drinking water quality monitoring standards in 11% of the samples. It was judged that appropriate measures, such as the installation of radon reduction facilities, will be required after a thorough review of high-concentration radon detection sites of in the research area.

안산·시흥 산업단지 지역 PM2.5 중 이온, 탄소, 원소성분의 특성 연구 (A Study on the Characteristics of Ion, Carbon, and Elemental Components in PM2.5 at Industrial Complexes in Ansan and Siheung)

  • 이혜원;이승현;전정인;이정일;이철민
    • 한국환경보건학회지
    • /
    • 제48권2호
    • /
    • pp.66-74
    • /
    • 2022
  • Background: The health effects of particulate matter (PM2.5) bonded with various harmful chemicals differ based on their composition, so investigating and managing their concentrations and composition is vital for long-term management. As industrial complexes emit considerable quantities of pollutants, higher PM2.5 concentrations and chemical component effects are expected than in other places. Objectives: We investigated the concentration distribution ratios of PM2.5 chemical components to provide basic data to inform future major emissions control and PM2.5 reduction measures in industrial complexes. Methods: We monitored five sites near the Ansan and Siheung industrial complexes from August 2020 to July 2021. Samples were collected and analyzed twice per week in spring/winter and once per week in summer/autumn according to the National Institute of Environmental Research in the Ministry of Environments' Air Pollution Monitoring Network Installation and Operation Guidelines. We investigated and compared composition ratios of 29 ions, carbon, and elemental components in PM2.5. Results: The analysis of PM2.5 components at the five sites revealed that ion components accounted for the greatest total mass at approximately 50% while carbon components and elemental components contributed 23~28% and 8~10%, respectively. Among the ionic components, NO3- occupies the greatest proportion. OC occupies the greatest proportion of the carbon components and sulphur occupies the greatest proportion of elemental components. Conclusions: This study investigated the concentration distribution ratios of PM2.5 chemical components in industrial complexes. We believe these results provide basic chemical component concentration ratio data for establishing future air management policies and plans for the Ansan and Siheung industrial complexes.

BIM 기반 위험요소 도출을 통한 정량적 위험성 평가 모델 개발 - 떨어짐 사고를 중심으로 - (Development of A Quantitative Risk Assessment Model by BIM-based Risk Factor Extraction - Focusing on Falling Accidents -)

  • 고휘재;현지훈;이주희;안요섭
    • 한국건설관리학회논문집
    • /
    • 제23권4호
    • /
    • pp.15-25
    • /
    • 2022
  • 건설산업의 중대재해 발생률 및 사망률이 가장 높아짐에 따라 이를 감축하기 위해 국내에서도 다양한 노력을 기울이고 있다. 그 중 위험성 평가는 시공단계 위험요소를 평가하고 재해 감소대책을 위한 자료로 활용되고 있다. 그러나 기존의 위험성 평가는 수행자의 주관이 개입되며 국내 건설현장에 취약한 측면이 있다. 본 연구는 위험성 평가 분야에 BIM을 활용하여 정량적으로 위험요소를 도출함으로써 리스크를 조기 식별하고 사전제거하는 것을 목표로 위험성 평가를 위한 DB 분류체계를 구축하였으며 BIM을 활용한 위험성 평가의 방법론을 제시한다. 이를 통해 리스크의 사전 제거로 시공 작업자의 안전성을 증대시키고 안전관리 분야의 추가비용을 절감한다. 또한, 신규 공법에도 적용 가능하므로 프로젝트 참여자들의 이해도를 높이며 의사소통의 도구가 된다. 본 연구는 BIM을 기반으로 정량적인 위험도를 도출하는 프레임워크를 제안하는 연구로써, 향후 BIM을 활용한 위험성 평가 분야에 기반 기술로 활용될 것이다.

Efficient CT Image Denoising Using Deformable Convolutional AutoEncoder Model

  • Eon Seung, Seong;Seong Hyun, Han;Ji Hye, Heo;Dong Hoon, Lim
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권3호
    • /
    • pp.25-33
    • /
    • 2023
  • CT 영상의 획득 및 전송 등의 과정에서 발생하는 잡음은 영상의 질을 저하시키는 요소로 작용한다. 따라서 이를 해결하기 위한 잡음제거는 영상처리에서 중요한 전처리 과정이다. 본 논문에서는 딥러닝의 convolutional autoencoder (CAE) 모형에서 기존 컨볼루션 연산 대신 deformable 컨볼루션 연산을 적용한 deformable convolutional autoencoder (DeCAE) 모형을 이용하여 잡음을 제거하고자 한다. 여기서 deformable 컨볼루션 연산은 기존 컨볼루션 연산보다 유연한 영역에서 영상의 특징들을 추출할 수 있다. 제안된 DeCAE 모형은 기존 CAE 모형과 같은 인코더-디코더 구조로 되어있으나 효율적인 잡음제거를 위해 인코더는 deformable 컨볼루션 층으로 구성하고, 디코더는 기존 컨볼루션 층으로 구성하였다. 본 논문에서 제안된 DeCAE 모형의 성능 평가를 위해 다양한 잡음, 즉, 가우시안 잡음, 임펄스 잡음 그리고 포아송 잡음에 의해 훼손된 CT 영상을 대상으로 실험하였다. 성능 실험 결과, DeCAE 모형은 전통적인 필터 즉, Mean 필터, Median 필터와 이를 개선한 Bilateral 필터, NL-means 방법 뿐만 아니라 기존의 CAE 모형보다 정성적이고, 정량적인 척도 즉, MAE (Mean Absolute Error), PSNR (Peak Signal-to-Noise Ratio) 그리고 SSIM (Structural Similarity Index Measure) 면에서 우수한 결과를 보였다.

석유화학업종에서의 비산배출원 배출 특성 분석 (Analysis Characteristic of Non-point source in Petrochemical)

  • 구치완;안승효;마병철
    • 한국가스학회지
    • /
    • 제26권6호
    • /
    • pp.45-51
    • /
    • 2022
  • 고정된 점배출원(Point source)에서 배출되는 오염물질을 포집하여 처리하는 기술은 꾸준히 개발되고 있으나, 비산배출원(Non-point source)의 경우 배출원이 다양하고, 일정하지 않아 배출물질 처리기술 및 실효성 있는 배출계수 등을 개발하는 것은 어려운 실정이다. 그렇지만, 비산배출원은 국내 배출량의 약 60%를 차지하고 있기 때문에 배출량 산정방법이 타당하여야 하며 이를 토대로 사업장은 배출저감기술 등을 개발하여야 한다. 이에, 본 연구에서는 배출량이 많은 석유화학업종을 대상으로 현재 사용되고 있는 배출계수의 실효성과 개선 방안 등을 제시하고자 한다. 이를 위하여, 전남 여수 소재 OO회사의 최근 5년간의 LDAR(Leak Detection And Repair)데이터를 분석하여 비산배출원의 배출특성 확인하였다. 그 결과, 유체 성상에 따른 배출 특성의 차이는 없으나 장치의 크기, 제조사별 특성의 차이가 있음을 확인할 수 있었다. 또한, 석유화학 업종에서 적용하는 자체 배출계수가 정유업종에 비해 크게 나타나는 것을 확인하였으며 이에 대한 개선방안 등을 제시하였다. 이러한 연구를 통하여 석유화학업종에 특화된 배출계수를 적용할 수 있으며 사업장 스스로 이를 획기적으로 감할 수 있는 기술을 개발하는데 기여할 것으로 기대한다.

H12 모형을 이용한 도시침수원인 및 침수방어벽의 효과 분석 (Retrospective analysis of the urban inundation and the impact assessment of the flood barrier using H12 model)

  • 김보미;노성진;이승수
    • 한국수자원학회논문집
    • /
    • 제55권5호
    • /
    • pp.345-356
    • /
    • 2022
  • 2020년 7월 30일 대전광역시 서구 A 아파트에서 새벽에 발생한 집중호우로 차량 78대와 아파트 2개 동이 침수되어, 사망 1명, 이재민 56명의 피해가 발생하였다. 본 연구에서는 1차원 관거-2차원 지표 흐름(1D-2D) 통합 해석 모형인 H12 모형과 고해상도 지표면 자료를 이용하여 침수 사상을 재현하고, 원인을 분석하였다. 또한, 침수 재해 발생 이후 A 아파트 주위에 설치된 침수방어벽의 침수 방어 효과를 분석하였다. 분석 결과, 좁고 가파른 유역형상, 주변 대비 고도가 낮은 대상 지역의 지형적 요인과 폭우로 인해 상류로부터 급속히 발생한 유출이 하류 저지대에서 배수되지 못해 발생한 침수 재해로 분석되었다. 침수방어벽의 효과를 분석하기 위해 고해상도 지표면 입력자료를 변경하여 침수방어벽 설치 전후를 모의하여 비교한 결과, 설치 후 A 아파트 단지 내 침수 수위가 낮아져 홍수 저감효과가 뛰어난 것으로 평가되었다. 본 연구를 통해 초고해상도 물리 기반 모형을 이용한 침수 원인 분석 및 저감 대책의 정량적 평가가 가능함을 확인하였다.

충청지역 일부 성인 여성의 체질량지수에 따른 체중조절용 식품과 건강기능식품 섭취 실태 및 식습관과 체중 관련 인식 (Consumption of Weight-control or Health Functional Foods, Dietary Habits, and Weight Perceptions According to the Body Mass Index of Adult Women in the Chungcheong Area)

  • 성가영;배문경
    • 대한지역사회영양학회지
    • /
    • 제27권2호
    • /
    • pp.81-93
    • /
    • 2022
  • Objectives: This study was conducted to investigate the experience and perception among adult women regarding weight control and the consumption of weight-control foods or health functional foods based on their body mass index (BMI). Methods: The subjects were 634 adult women from the Chungcheong province, Korea, and data were collected through a self-administered questionnaire from July 2021 through September 2021. The subjects were divided into four groups based on their BMI status: underweight (< 18.5 kg/m2, 7.6%), normal weight (18.5 ~ 22.9 kg/m2, 53.3%), overweight (23 ~ 24.9 kg/m2, 19.7%), and obese (≥ 25 kg/m2, 19.4%). Results: Over the past 3 years, almost two-thirds (68.6%) of the adult women had tried weight control measures, despite the fact that a significant proportion of them were normal or underweight. More importantly, 57.6% of subjects reported the consumption of weight-control foods, with a lower proportion in the underweight (35.4%) group compared to the normal (56.2%), overweight (62.4%), and obese (65.0%) groups. The food items used for weight control were mostly salads, chicken breasts, low fat (soy) milk, slimming tea, protein shakes, low-calorie cereals, and energy/protein bars among others. In addition, one-third (31.1%) of the subjects reported the use of health functional foods containing ingredients for fat reduction. A significantly higher proportion of these was from the overweight (36.0%) and obese (38.2%) groups compared to the underweight (20.8%) and normal weight (28.1%) groups. Products containing Garcinia cambogia extract, green tea, or Cissus extract, were popular among users. Subjects who were obese had a poorer perception of their health and body. Most subjects felt the need for correct information regarding weight control, but this number was significantly more in the higher BMI groups. Conclusions: Our results suggest that the use of weight-control foods or health functional foods is popular among adult women, especially those who are obese. Thus, nutrition education courses covering facts about weight control and practice need to be developed and provided based on the BMI status of subjects.

건설 신기술의 원가산정기준 개선방안에 대한 연구 (A Study of Improvements in the Standards of Cost Estimate for the New Excellent Technology in Construction)

  • 이주현;태용호;백승호;김경민
    • 한국건설관리학회논문집
    • /
    • 제23권5호
    • /
    • pp.65-76
    • /
    • 2022
  • 국내 건설기술의 발전을 도모하고 국가경쟁력을 제고하기 위한 목적으로 1989년 도입된 건설 신기술 지정제도는 심사과정에서 신기술의 원가계산서를 검토하고, 설계·시공 공사비, 유지관리비 등 비용절감효과와 공사기간 단축 효과를 경제성 항목으로 평가하고 있다. 그러나 이 과정에서 고유기술에 대하여 공사비산정기준관리기관과 신기술 개발자간의 의견차이가 빈번히 발생하고 있으며, 또한 현행 신기술에 대한 원가산정기준이 단위수량당 소요량만을 제시하는 방식으로 생산성에 대한 정보가 부재하여 기존 유사 기술과의 공사기간에 대한 객관적인 비교가 어려운 실정이다. 본 연구에서는 건설 신기술 심사 시 원가산정기준 검토절차와 심사기준, 신기술 품셈 작성방법 등 현황을 분석하고 해외 원가산정기준과 비교하여 현행 건설 신기술의 원가산정기준 개선방안을 제시하였다. 제시한 개선방안은 작업조 기반의 생산성 정보를 제공하고, 적용단가를 제시하여 원가기준의 투명성을 확보할 수 있도록 구성하였으며, 신기술의 특성을 고려하여 재료비와 기계경비에 대한 원가정보 역시 제공할 수 있도록 하였다. 본 연구의 개선된 원가산정 기준을 통해 발주자에게 신기술에 대한 원가정보를 현행보다 세부적으로 제공하고, 공사비 산정 과정을 보다 간소화함으로써 건설 신기술의 활용과 현장적용성을 향상시킬 수 있으리라 기대된다.

어선용 복합 추진시스템 적용을 위한 연구 (A Study on the Application of Hybrid Propulsion System for Fishing Vessels)

  • 노정호
    • 해양환경안전학회지
    • /
    • 제28권7호
    • /
    • pp.1238-1243
    • /
    • 2022
  • 국제해사기구(IMO)를 필두로하여 국제적으로 선박에 대한 배출가스 규정을 강화하고 있으며, 대한민국 정부도 온실가스 감축을 위한 기본 로드맵을 설정하는 등 배출가스 저감을 위한 대책 마련이 절실한 상황이다. 또한, 국내 연안을 항해하는 선박에서 배출되는 온실가스 배출량 중 90.6%를 차지하고 있는 어선에 적용가능한 효율적이고 배출가스량이 감소가능한 새로운 추진시스템의 도입이 절실하다. 본 연구에서는 국내 연안어선에 적용가능한 전기복합 추진시스템을 제안하고, 전기복합 추진시스템이 적용가능한 대상선박을 선정하였다. 선정된 기존 대상어선에 탑재된 추진시스템과 비교하여 개발된 전기복합 추진시스템을 적용할 경우 발생할 수 있는 예상 연료소모량을 비교하기 위한 시뮬레이션 시스템을 Matlab/Simulink를 이용하여 구성하였다. 시뮬레이션을 통해 기계식 추진시스템, 전기복합 추진시스템(배터리 육상충전을 하지 않은 경우, 육상충전을 한 경우)간의 연료소모량 결과를 확인하였으며 전기복합 추진시스템을 적용하는 경우 약 13%, 16%의 연료소모량이 감소될 수 있는 것을 보여주는 결과를 확인하였다.

한의원 진료환경에서 비만환자 대상 한의통합치료의 체중 감량 효과 및 안전성에 관한 연구: 후향적 차트 리뷰 (A Study on Weight Loss Effect and Safety of Integrated Korean Medicine Treatment on Obese Patients in Local Clinics: A Restrospective Chart Review)

  • 권오진;양창섭;김용진;구원회;이원구;김기병;제갈경환
    • 한방비만학회지
    • /
    • 제22권2호
    • /
    • pp.125-135
    • /
    • 2022
  • Objectives: A restrospective chart review were conducted to investigate the overall weight loss effect of the integrated Korean medicine treatment on obese patients (body mass index [BMI] ≥25 kg/m2) in Korean medicine clinic and analyze the difference in the effect according to lifestyle behaviors. Methods: The medical records of 43 obese patients were retrospectively analyzed including body weight, BMI, waist circumference, hip circumference, and body composition who received integrated Korean medicine treatment for 4 weeks at 24 Korean medicine clinics in Daejeon metropolitan city. All outcome measures were evaluated again 8 weeks after the end of treatment at week 12 for follow-up. EuroQol-5D (EQ-5D), the Korean version of the obesity-related quality of life scale (KOQOL) and patient's satisfaction were also evaluated. The analysis was divided according to the treatment period and observation period, and subgroup analysis was performed according to drinking and exercise habits. Results: Body weight, body fat, waist circumference, hip circumference, body fat were significantly reduced at week 4 and week 12. Theses weight reduction effects were significantly greater within treatment period (0 to 4 week) than observation period (4 to 12 week). Especially in the non-exercise group, the changes in body fat mass and body fat percent showed a significant difference between the treatment period and the observation period. KOQOL were also significantly improved at 12 week, but not in EQ-5D. No severe adverse events were observed. Conclusions: The integrated Korean medicine treatment could be effective to treat obesity including weight loss. It is necessary to prevent additional weight regain through regular exercise even after Korean medicine treatment.