• 제목/요약/키워드: Reduction Implementation

검색결과 1,028건 처리시간 0.025초

태양폭풍 영향 우주 및 육상시스템 피해에 관한 재난안전정보시스템 구현 (An Implementation of the Disaster Management Systems on the Space and Terrestrial System Damages by Solar Maximum)

  • 오종우
    • 한국재난정보학회 논문집
    • /
    • 제8권4호
    • /
    • pp.419-431
    • /
    • 2012
  • 우주기상 극대기인 2003년은 지구상에 크나큰 재앙을 초래할 것으로 예견되고 있다. 특히 근년에 들어 지자기 폭풍에 의한 손상과 가시화 될 수 있는 대 폭풍피해 사례를 보이고 있다. 본 연구에서는 이상에서 제시된 문제점에 대한 피해분석에 따른 궁극적인 우주기상정보시스템 모델 구축으로 피해 저감하고 대비방안을 설정하는 것이다. 구현방법으로는 uIT기반과 GIS기반의 우주기상 정보시스템 구축으로 우주폭풍에서 방사되는 우주복사폭풍(flare), 우주입자폭풍(solar proton event), 우주자기폭풍(geomagnetic storm) 등에 의한 분야별 폭풍피해를 분석하여 유형별 피해 대응에 대비할 수 있도록 하였다. 이로써 공간정보기반의 우주폭풍 전기전자 피해대비 운영관리시스템 구현은 GIS기법에 의한 의사결정지원 시스템으로 피해예측 및 방재환경을 스마트 IT환경과 융합한 첨단 정보시스템으로 구현하여 인명과 재산을 보전할 수 있는 방안으로 활용될 수 있을 것이다.

CT 보험급여 전후의 CT 및 MRI검사의 이용량과 수익성 변화 (Analysis of utilization and profit for CT and MRI after implementation of insurance coverage for CT)

  • 서종록;유승흠;전기홍;남정모
    • 한국병원경영학회지
    • /
    • 제2권1호
    • /
    • pp.1-21
    • /
    • 1997
  • In order to analyze the shifts in the volume and profits of Computed Tomography(CT) and Magnetic Resonance Imaging(MRI) utilization for a year before and after the implementation of insurance coverage for CT, this study has been undertaken examining CT and MRI cost data from 'Y' University Hospital situated in Seoul, Korea. Following are the results of this study: 1. The medical insurance payment for CT, implemented on January 1, 1996, increased CT utilization from January 1996 to April 1996 due to low insurance premiums: however, from May 1996 the number of CT cases significantly decreased as a result of strengthened medical cost reviews and the new 'Detailed standards for approval of CT' announced near the end of April 1996 by the insurer. 2. Since the implementation of insurance coverage for CT, CT fee reduction rates for reimbursements by the insurer to the hospital were 50% and 40% for January and February, respectively, and 31% and 15% for March and April. A significant point in the lowering of the reduction rate was reached in May at 11%; furthermore, since June the reduction rate fell below the average reduction rate for reimbursements for all procedures. If the 'Detailed standards for approval of CT' had been announced before the implementation of insurance coverage for CT, CT utilization would not have been so high due to the need to meet those 'standards'. In addition, loss of hospital profits resulting from the reduction for reimbursements would not have occurred. 3. The shifts in MRI utilization showed that there was no particular change with the beginning of insurance coverage for CT, and the introduction of the 'Detailed standards for approval of CT' made MRI utilization increase because MRI is free of restrictions imposed by the insurer. 4. The relationship between CT utilization and MRI utilization showed that they were supplementary to each other before insurance coverage for CT, but that CT was substituted for MRI because of strengthened medical cost reviews after t~e beginning of insurance coverage for CT. 5. The shifts in volume by patient characteristics showed that the number of inappropriate case patients, according to the insurer's "Standards for approval", decreased more than the number of appropriate case patients after the introduction of insurance coverage for CT. Therefore, the health insurance fee schemes for CT have influenced patient care. 6. The shifts in profits from CT utilization showed a net profit decrease of 31.6%. In order to match the pre-coverage profit level, 5,471 more cases would need to be seen and productivity would need to be increased by 32.7%. This profit decrease resulted from a decrease of CT utilization and low reimbursements. With insurance coverage, net profits from CT were 24.4%, and a margin of safety ratio was 39.6%. Because of the net profits and margin of safety ratio, CT utilization fees for insured appropriate cases could not be considered inappropriate. 7. The shifts in profits from MRI utilization before and after the introduction of CT coverage showed that in order to match pre-CT coverage profit levels, 2,011 more cases would need to be seen and productivity would need to be increased by 9.2%. The reasons for needing to increase the number of cases and productivity result from cost burdens created by adding new MRI units. But with CT coverage already begun, MRI utilization increased. Combined with a minor increase in the MRI fee schedule, MRI utilization showed a net profit increase of 18.5%. Net profits of 62.8% and a 'margin of safety ratio' of 43.1% for MRI utilization showed that the hospital relied on this non-covered procedure for profits. 8. The shifts in profits from CT and MRI utilization showed the net profits from CT decreased by 2.33billion Won while the net profits from MRI increased by 815.7million Won. Overall, these two together showed a net profit decrease of 1.51billion Won. The shifts in utilization showed a functional substitutionary relationship, but the shifts in profits did not show a substitutionary relationship. From these results, We can conclude that if insurance is to be expanded to include previously uncovered procedures using expensive medical equipment, detailed standards should be prepared in advance. The decrease in profits from the shifts in coverage and changes in fees is a difficult burden that should be shared, not carried by the hospital alone. Also, a new or improved fee schedule system should include revised standards between items listed and the appropriateness of the fee schedule should constantly be ensured. This study focused on one university hospital in Seoul and is therefore limited in general applicability. But it is valuable for considering current issues and problems, such as the influence of CT coverage on hospital management. Future studies will hopefully expand the scope of the issues considered here.

  • PDF

DCT 기반 소형, 저전력 잡음 발생기 구현 (Implementation of DCT-based Low Area/Power Noise Generation System)

  • 김대익;박홍열;정진균
    • 한국통신학회논문지
    • /
    • 제27권9C호
    • /
    • pp.879-885
    • /
    • 2002
  • 통신 시스템의 성능은 여러 가지 요구 조건을 고려하여 측정되어져야 한다. 이러한 목적으로 잡음 발생기는 주어진 특성을 갖는 잡음 신호를 생성하는데 사용되는 시스템이다. 본 논문에서는 최근에 제안된 DCT를 이용한 잡음 발생기에서 DCT를 제외한 회로의 면적을 약 44∼47% 정도 줄이는 구조를 제안한다. 또한, 제안된 구조는 내부의 빠른 클럭을 사용하지 않게 되어 74∼77% 정도의 전력소모를 감소시켰다.

승용차의 차량 롤 제어를 위한 시스템 구현 (Implementation of Roll Control System for Passenger Car)

  • 장주섭;이상호
    • 한국자동차공학회논문집
    • /
    • 제5권5호
    • /
    • pp.20-26
    • /
    • 1997
  • A System for reducing vehicle body roll by active control is developed. The stabilizer bar with hydraulic rotary actuator produces anti-roll moment which suppresses roll tendency. This reduction of roll improves the driving safety as well as the ride comfort. Vehicle test data shows considerable reduction of roll angle during steady-state turning. Also improvement of ride comfort is achieved by making the actuator freely rotatable, i.e. by connecting all chambers of actuator in normal driving conditions. A control algorithm using steering wheel angle and vehicle speed signal as input valve is applied. It is compared with signal of the G-sensor.

  • PDF

1D CCM 탄도수정 성능예측 및 알고리즘 구현 연구 (A Study on Course Correction Performance Expectation & Algorithm Implementation of 1D CCM)

  • 김기표
    • 한국군사과학기술학회지
    • /
    • 제10권1호
    • /
    • pp.5-13
    • /
    • 2007
  • The trajectory of an current artillery munition is subject to a variety of different error sources resulting in more or less big deviation from the nominal predicted flight path. The 1D CCM(Course Correction Munition) has appeared to solve this problem and the mechanism of 1D CCM is a simple and low cost one using the influence of drag to range behavior of an artillery munition. In the paper 1D CCM concept has been simulated using wind tunnel experiment results of the specified Korean munition with CCF(Course Correction Fuze) and calculated the performance of its rang error reduction. From the simulated results it can be numerically explained that the possibility of adaptation of 1D CCM concept to Korean artillery munitions.

An area-efficient 256-point FFT design for WiMAX systems

  • Yu, Jian;Cho, Kyung-Ju
    • 한국정보전자통신기술학회논문지
    • /
    • 제11권3호
    • /
    • pp.270-276
    • /
    • 2018
  • This paper presents a low area 256-point pipelined FFT architecture, especially for IEEE 802.16a WiMAX systems. Radix-24 algorithm and single-path delay feedback (SDF) architecture are adopted in the design to reduce the complexity of twiddle factor multiplication. A new cascade canonical signed digit (CSD) complex multipliers are proposed for twiddle factor multiplication, which has lower area and less power consumption than conventional complex multipliers composed of 4 multipliers and 2 adders. Also, the proposed cascade CSD multipliers can remove look-up table for storing coefficient of twiddle factors. In hardware implementation with Cyclone 10LP FPGA, it is shown that the proposed FFT design method achieves about 62% reduction in gate count and 64% memory reduction compared with the previous schemes.

사출 성형품의 휨과 웰드라인을 최적화하기 위한 자동 금형설계 방법 (Automatic Mold Design Methodology to Optimize Warpage and Weld Line in Injection Molded Parts)

  • 박종천
    • 소성∙가공
    • /
    • 제9권5호
    • /
    • pp.512-525
    • /
    • 2000
  • Designers are frequently faced with multiple quality issues in injection molded parts. These issues are usually In conflict with each other, and thus tradeoff needs to be made to reach a final compromised solutions. The objective of this study is to develop an automated injection molding design methodology, whereby part defects such as warpage and weld line are optimized. The features of the proposed methodology are as follows: first, Utility Function approach is applied to transform the original multiple objective problem into single objective problem. Second is an implementation of a direct search-based Injection molding optimization procedure with automated consideration of process variation. The Space Reduction Method based on Taguchi's DOE(Design Of Experiment) is used as a general optimization tool in this study. The computational experimental verification of the methodology was partially carried out for a can model of Cavallero Plastics Incorporation, U. S. A. Applied to production, this study will be of immense value to companies in reducing the product development time and enhancing the product quality.

  • PDF

광 픽업 장치의 H${\infty}$이산시간 서보제어 (H${\infty}$discrete-time servo control of optical pick-ups)

  • 임승철;김윤영
    • 소음진동
    • /
    • 제6권4호
    • /
    • pp.521-528
    • /
    • 1996
  • Recently, higher speed optical disk drives including computer CD-ROM drives tend to be increasingly demanded to read or write the enormous volume of digital data. To this end, both structure and controller designs of the optical pick-ups should be improved concurrently. In this paper, the pick-up during auto-focusing motion is mathematically modelled retaining all its peculiar features. The model turns out a linear time invariant system suitable for a control design namedH${\infty}$ which ensures robust stability in the presence of system uncertainties. Numerical simulations are performed to demonstrate the robustness with appropriate performance specifications being satisfied. In addition, as the implementation issue of it, procedures of temporal discretization as well as model reduction of the controller are also addressed.

  • PDF

Influence of time delay and saturation capacity to the response of controlled structures under earthquake excitations

  • Pnevmatikos, Nikos G.;Gantes, Charis J.
    • Smart Structures and Systems
    • /
    • 제8권5호
    • /
    • pp.449-470
    • /
    • 2011
  • During the last thirty years many structural control concepts have been proposed for the reduction of the structural response caused by earthquake excitations. Their research and implementation in practice have shown that seismic control of structures has a lot of potential but also many limitations. In this paper the importance of two practical issues, time delay and saturation effect, on the performance of controlled structures, is discussed. Their influence, both separately and in interaction, on the response of structures controlled by a modified pole placement algorithm is investigated. Characteristic buildings controlled by this algorithm and subjected to dynamic loads, such as harmonic signals and actual seismic events, are analyzed for a range of levels of time delay and saturation capacity of the control devices. The response reduction surfaces for the combined influence of time delay and force saturation of the controlled buildings are obtained. Conclusions regarding the choice of the control system and the desired properties of the control devices are drawn.

합성수지 생산공정의 JIT 생산 시스템 도입에 대한 실증적 연구 (An Empirical Study on JIT Production System's Implementation in a Synthetic Resins Manufacturing Process)

  • 임치환
    • 산업경영시스템학회지
    • /
    • 제25권4호
    • /
    • pp.69-78
    • /
    • 2002
  • The basic purpose of the JIT(Just In Time) production system is to increase profits by reducing costs-that is, by completely eliminating waste such as excessive stocks or workforce. To achieve cost reduction, Production must promptly and flexibly adapt to changes in market demand without having wasteful slacks. :iuch an ideal is accomplished by the concept of JIT, producing the necessary items in the necessary quantities at the necessary time. The JIT production system is supported by the following: reduction of setup time, smoothing of production, standardization of jobs, improvement activities, design of machine layout, Kanban system, autonomation etc. This study examined the present state of the domestic JIT production system and introduced the empirical case of JIT application a small and medium manufacturing company. A synthetic resins manufacturing company applied JIT principles to its processes and achieved the great performance.