• 한국컴퓨터정보학회논문지
• /
• 제10권4호
• /
• pp.239-248
• /
• 2005

대규모 무선 센서 네트워크는 네트워크의 신뢰성과 에너지 효율을 동시에 고려해야 한다. 네트워크의 신뢰성을 높이기 위해서는 유니 캐스트 기반 데이터 전송 방법보다 브로드캐스트 기반 데이터 전송 방법을 사용해야 한다. 최근 발표된 GRAdient Broadcast (GRAB)는 브로드캐스트 기반 데이터 전송으로 네트워크의 신뢰성을 높일 수 있다. 하지만 한 개의 sink를 사용하기 때문에 네트워크 전체 에너지를 고르게 사용하지 못한다. 결국 네트워크의 동작 시간이 단축되는 단점이 있다. 이에 본 논문에서는 대규모 무선센서 네트워크에 적합한 Selective Multi Sink Gradient Broadcast (SMSGB)를 제안한다. SMSGB 는 여러 개의 sink를 사용하여 네트워크를 구성하고 한 개의 sink만 데이터를 수집한다. 특정한 이벤트가 발생이 되면 다른 sink가 데이터를 수집하게 된다. 이러한 방법을 통해 전체 네트워크의 에너지를 고르게 소모 할 수 있다. 또한 GRAB와 동일한 브로드캐스트 기반 데이터 전송으로 대규모 무선 센서 네트워크에서 신뢰성을 보장할 수 있다. 기존의 GRAB와 SMSGB를 비교한 모의실험을 통해 GRAB와 비슷한 신뢰성을 유지하면서 GRAB보다 SMSGB의 네트워크 동작 시간이 약 18% 이상 연장됨을 보인다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.341-348
• /
• 2001

The purpose of present study is to investigate for reducing pressure fluctuations in the case of installing the air-shafts on the side wall of the tunnel with small cross-sectional area on conventional line. Experiments were performed with a 1/61-scale moving model rig for the tunnel of 0.764 km length in the condition of tunnel cross-section area of $28 m^2$. According to the results, the maximum pressure fluctuation is reduced by 45 % for 19 air-shafts. This results have the speed-up effects of about 33.4 km/h for the train running in tunnel.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.73-79
• /
• 2003

The characteristics of NOx emission in multi fuel/air staged combustor have been experimentally studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is act as a pilot flame for the secondary combustion stage combustion zone, where most of fuel burns. Experiments were performed on a semi-industrial scale (thermal input 0.233 ㎿) in a laboratory furnace and Liquefied Petroleum Gas(LPG) was used as primary and secondary fuels. The study included parametric study to identify the optimum operating conditions which are primary/secondary fuel ratio, primary/secondary air ratio, primary swirl intensity and secondary swirl intensity for reducing NOx emission. The test demonstrated that NOx emission can be reduced by >70% in accordance with operating conditions.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.389-394
• /
• 2004

An experimental study on the NOx formation of LNG flame in fuel staged combustor has been studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is a act as a pilot flame for the secondary combustion stage combustion zone, where most of fuel bums. Experiments were performed on a semi-industrial scale (thermal input 0.233 MW) in a laboratory furnace and Liquefied Natural Gas(LNG) was used as a primary and secondary fuels. This study included parametric study to identify the optimum operating conditions which are primary/secondary fuel ratio, and primary/secondary air ratio for reducing NOx emission with two types of nozzle. The test demonstrated that NOx emission can be reduced by >70% in accordance with operating conditions.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.1020-1025
• /
• 2005

The set covering(SC) problem has many practical application of modeling not only real world problems in civilian but also in military. In this paper we study optimal allocation model for maximizing utility of consolidating old fashioned and new air defense weapon system like Patriot missile and develop the new computational algorithm for the SC problem by using simulated annealing(SA) algorithm. This study examines three different methods: 1) simulated annealing(SA); 2) accelerated simulated annealing(ASA); and 3) selection by effectiveness degree(SED) with SA. The SED is adopted as an enhanced SA algorithm that the neighboring solutions could be generated only in possible optimal feasible region at the PERTURB function. Furthermore, we perform various experiments for both a reduced and an extended scale sized situations depending on the number of customers(protective objective), service(air defense), facilities(air defense artillery), threat, candidate locations, and azimuth angles of Patriot missile. Our experiment shows that the SED obtains the best results than others.

• 대한수학회보
• /
• 제55권4호
• /
• pp.1303-1315
• /
• 2018

For principal component analysis (PCA) to efficiently analyze large scale matrices, it is crucial to find a few singular vectors in cheaper computational cost and under lower memory requirement. To compute those in a fast and robust way, we propose a new stochastic method. Especially, we adopt the stochastic variance reduced gradient (SVRG) method [11] to avoid asymptotically slow convergence in stochastic gradient descent methods. For that purpose, we reformulate the PCA problem as a unconstrained optimization problem using a quadratic penalty. In general, increasing the penalty parameter to infinity is needed for the equivalence of the two problems. However, in this case, exact penalization is guaranteed by applying the analysis in [24]. We establish the convergence rate of the proposed method to a stationary point and numerical experiments illustrate the validity and efficiency of the proposed method.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.163-171
• /
• 2001

The characteristics of NOx emission in multi fuel/air staged combustor have been experimentally studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is act as a pilot Dame for the secondary combustion stage combustion zone, where most of fuel bums. Experiments were performed on a semi-industrial scale (thermal input 0.233 MW) in a laboratory furnace and Liquefied Petroleum Gas(LPG) was used as primary and secondary fuels. The study included parametric study to identify the optimum operating conditions which are primary/secondary fuel ratio, primary/secondary air ratio, primary swirl intensity and secondary swirl intensity for reducing NOx emission. The test demonstrated that NOx emission can be reduced by ${>}$70% in accordance with operating conditions.

• Water Engineering Research
• /
• 제6권1호
• /
• pp.1-15
• /
• 2005

The numerical model, FLUENT, was employed to investigate the effect of the heated water discharged from the diffuser of Boryung Power Plant. Temperature patterns of the thermal effluent discharged from two proposed types of the diffusers was evaluated for maximum flood and maximum ebb tide. The hydraulic model experiments were also performed in the reduced scale of 1/150 to verify the numerical simulation results. The buoyant jets discharged from the diffusers were found to be significantly affected by the ambient flows beyond the region where the effluent momentum was dissipated. Both the numerical and experimental results showed that the area of the excess isotherm for Type 1 diffuser was larger than that for Type 2 diffuser. Type 2 diffuser system was observed to be a more effective diffuser design than Type 1 diffuser system based on the temperature reduction and excess isotherm obtained from the numerical simulation in the ambient flows.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.161-166
• /
• 2001

An Experimental study on the NOx formation of LNG flame in fuel staged combustor has been studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is act as a pilot flame for the secondary combustion stage combustion zone, where most of fuel burns. Experiments were performed on a semi-industrial scale (thermal input 0.233 MW) in a laboratory furnace and Liquefied Natural Gas(LNG) was used as primary and secondary fuels. The study included parametric study to identify the optimum operating conditions which are primary/secondary fuel ratio, and primary/secondary air ratio for reducing NOx emission with two types of nozzle. The test demonstrated that NOx emission can be reduced by >70% in accordance with operating conditions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.427-438
• /
• 2018

The reduction of $CO_2$ emissions has been a key target in the marine industry since the IMO's MEPC published its findings in 2009. Air lubrication method is one of the mature technologies for commercialization to reduce the frictional resistance and enhance fuel efficiency of ships. Air layer is formed by the coalescence of the injected air bubbles beyond a certain air flow rate. In this study, a model ship (${\lambda}=33.33$) of a 50,000 ton medium range tanker is equipped with an air lubrication system. The experiments were conducted in the 100 m long towing tank facility at the Pusan National University. By selecting optimal air injector configuration and distribution ratio between two injectors, the total resistance of model $R_{TM}$ was able to be reduced down to 18.1% in the model scale. Key issue was found to suppress the sideway leakage of injected air by appropriate injection parameters.