• Carbon letters
• /
• 제16권4호
• /
• pp.255-259
• /
• 2015

• 한국연초학회지
• /
• 제18권1호
• /
• pp.85-91
• /
• 1996

Commercially available activated carbon was treated with 0.2N NaOH/0.1N HCl to decrease the ash contents and to analyze the effect of demineralization. We have studied their properties and adsorptivity to solvents such as benzene, acetone, toluene and carbon tetrachloride, ammonia and also aldehydes of cigarette smoke. By demineralization with NaOH/HCl, surface area and pore volume were increased up to 10 - 20% according to developement of micro-pore and pH of activated carbon was also changed from 10.2 to 6.3. Surface acidity of the activated carbon treated with chemicals increased slightly. The chemical treatment led to small increase in adsorptioil properties of solvents, ammonia and aldehydes of cigarette smoke, but content of chlorine and sulfur in activated carbon were reduced. As the results of smoking test, charcoal taste caused by the activated carbon was reduced significantly by the treatment with NaOH/HCl.

• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.233-245
• /
• 1996

Nanocrystalline materials, with a grain size of typically <100 nm, are a new class of materials with properties vastly different from and often superior to those of the conventional coarse-grained materials. These materials can be synthesized by a number of different techniques and the grain size, morphology, and composition can be controlled by controlling the process parameters. In comparison to the coarse-grained materials, nanocrystalline materials show higher strength and hardness, enhanced diffusivity, improved ductility/toughness, reduced, density, reduced elastic modulus, higher electrical resistivity, increased specific heat, higher coefficient of thermal expansion, lower thermal conductivity, and superior soft and hard magnetic properties. Limited quantities of these materials are presently produced and marketed in the US, Canada, and elsewhere. Applications for these materials are being actively explored. The present article discusses the synthesis, structure, thermal stability, properties, and potential application of nanocrystalline materials.

• 한국주조공학회지
• /
• 제22권4호
• /
• pp.160-166
• /
• 2002

The structure and properties of Fe-29Ni-17Co alloy which had been melted using induction furnace in air atmosphere and than electroslag-remelted were investigated. The oxygen content was reduced to 0.03% when the ingot was refined from $0.09{\sim}0.12%$ of that air melted. The amounts of spheroidal oxides inclusions and gas porosities of ingot were markedly reduced by the ESR process. CTE of ESR ingot contained small amount of oxides and porosities was found to be lower than that of AIM ingot, and tensile properties of ESR ingot and plate were found to be superior than that of AIM ingot and plate.

• 한국세라믹학회지
• /
• 제23권2호
• /
• pp.31-37
• /
• 1986

The effect of dehydration temperature on the reduction process of silica-coated hematite was invest-igated The particle shape and magnetic properties of the products reduced from hematite at various conditions and the oxidation resistance of silica-coated iron powder were examined. It was revealed that single phase iron powder obtained over 45$0^{\circ}C$ had good magnetic properties. The iron powder manufactured between 45$0^{\circ}C$ and 50$0^{\circ}C$ displayed the maximum coercive force as a result of maintaining its acicular shaped. However the coercive force of iron powder reduced over 50$0^{\circ}C$ was decreased. The oxidation resistance of silica-coated iron powder in air was very good up to 11$0^{\circ}C$ and for 12 days.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.185-190
• /
• 2001

The structure borne noise of the air-conditioner, which degrades the noise quality, is hardly reduced by the general noise treatments. It can be effectively reduced by eliminating the structural vibration which the noise originates from. The rubber vibration isolator prevents the dynamic force induced by the fan driving motor from exciting the chassis structure, which finally reduces the structure borne noise. The dynamic properties of the vibration isolation system such as the natural frequency of the vibration isolation and loss factor of the rubber isolator, need to be experimentally evaluated. In this paper, these dynamic properties were obtained by the resonant method using the impact hammer for 3 types of the isolator specimens. It is known that the isolation natural frequency of the axial direction of the rubber isolator is two times higher than that of the radial direction, and is proportional to the hardness of the rubber specimen.

• 한국염색가공학회지
• /
• 제18권2호
• /
• pp.31-38
• /
• 2006

Silk fabrics are very popular and widely used because of their elegant appearance. However, silk fabrics generally have easy wrinkle, and do not stretch and deform permanently after machine washing. Then the stretched properties of silk fabrics are important for the application of industrial textile materials such as formal and sports wear. Thus, this research surveys the covering, weaving and degumming conditions for stretched silk fabrics. As a result, yarn breaking stress was reduced with increasing spindle speed, and the yarn twists were optimized under the covering condition of polyurethane/silk with PVA pretreatment. In addition, the shrinkage of the silk fabrics treated with star degumming process was reduced by continuous NaOH degumming process. The fabrics showed the fabric physical properties with optimum stretched properties and evenness surfaces.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.226-229
• /
• 1999

Epoxy compound has been used as insulation material in electrical equipment for a long time because of its excellent electrical, mechanical and chemical properties. Nowdays, becoming higher voltage system, the properties of interface between epoxy and metal insert become more important. The breakdown voltage of epoxy compound for electric material is variable according to the surface roughness of metal insert. Generally, with metal insert sanding, the adhesion strength is enhanced and the breakdown strength is reduced. But in this study, we knew that the adhesion strength became enhanced but the breakdown strength didn\`t reduced with metal insert sanding. So in this study sanding. So in this study, we suggest the optimum interface condition by adjusting the surface roughness.

• Journal of Information Display
• /
• 제13권4호
• /
• pp.145-149
• /
• 2012

Liquid crystals are useful for a wide range of applications due to their exceptional properties. Doping of liquid crystals with carbon nanotubes (CNTs), even at very low concentrations, produces a detectable effect on the liquid crystal (LC) properties that can be very attractive for various functions. In this study, an attempt was made to investigate the effect of CNTs on the electrical properties of a short-pitch and high-spontaneous-polarization ferro-electric LC mixture, FLC-6304, at different temperatures. The inclusion of the CNTs significantly reduced the polarization at temperatures well within the $SmC^*$ phase, but the effect was gradually reversed as the transition temperature was approached. The insertion of the CNTs also reduced the response time and the rotational viscosity of the FLC mixture, which is highly desirable in the LCD industry.

• 한국표면공학회지
• /
• 제52권5호
• /
• pp.275-281
• /
• 2019

Anodization is widely used to enhance the properties of aluminum, such as hardness, electric resistance, abrasion resistance, corrosion resistance etc. But these properties can be enhanced with additional process. According to the partial crystallization of oxide layer with post heat treatment, enhanced hardness can be expected with partial crystallization. In this study, post heat treatments were applied to the anodized aluminum alloys of Al6061 to achieve the partial crystallization, and crystallizations were evaluated with the reduced breakdown voltages. Interestingly, remarkable enhanced hardness (21~29%), abrasion resistance (26~62%), and reduced breakdown voltage (24~44%) were observed for the sulfuric acid anodized samples when we annealed the anodized samples with 1hour post heat treatment at $360^{\circ}C$. For the Al5052 alloys, a lot of cracks were observed when we applied the post heat treatment.