• 제목/요약/키워드: Reduced data structure

검색결과 485건 처리시간 0.025초

오미자 (Schisandra chinensis Baillon)로부터 순수분리한 리그난이 무의 종자발아 및 유묘생육에 미치는 영향 (Effect of Lignans Isolated from Schisandra chinensis Baillon on Seed Germination and Seedling Growth in Radish)

  • 박다정;김윤한;박세진;;박영훈;강점순;손병구;이용재;김선태;윤무경;최영환
    • 농업생명과학연구
    • /
    • 제46권1호
    • /
    • pp.91-103
    • /
    • 2012
  • 본 연구의 목적은 오미자로부터 순수분리한 리그난이 무의 종자발아 및 유묘생장에 미치는 영향을 조사함으로서 생장조절제와 천연물의 생물검증 방법을 개발하기 위해서 수행하였다. 오미자로부터 순수 분리한 schisandrin, schisandrin C, gomisin A 및 gomisin N 등 4종의 리그난이 무 종자의 발아 및 유묘생육에 미치는 영향을 조사하였다. 무 종자를 $10^{-5}$, $10^{-6}$$10^{-7}M$의 schisandrin, schisandrin C, gomisin A 및 gomisin N 용액에 1시간 침지 후 발아율을 비교한 결과, 4종의 리그난류 처리는 대조구에 비해 발아속도가 빨랐다. 리그난류의 처리 48시간 후 대조구를 기준으로 하여 발아율의 촉진 또는 억제 효과를 비교한 결과, schisandrin과 gomisin A는 $10^{-6}M$의 농도에서, schisandrin C와 gomisin N은 농도가 높을수록 발아율이 억제되는 경향이었다. 리그난이 유묘생육에 미치는 영향을 대조구를 기준으로 하여 생육 촉진 또는 억제 효과를 조사한 결과, 하배축은 gomisin A와 gomisin N의 처리시 $10^{-5}M$의 고농도에서, gomisin N의 경우에는 $10^{-6}M$에서 생육이 촉진되었으며, 뿌리의 길이는 schisandrin $10^{-4}M$의 고농도에서 가장 길었다. 유식물체당 총 생체중 및 건물중은 $10^{-7}M$의 저농도 처리시에 촉진되었으며, schisandrin C는 $10^{-5}M$의 고농도 처리시에 생체중과 건물중이 감소하였다. 따라서 오미자로부터 순수분리한 리그난은 종자발아 또는 유묘의 생장을 조절할 수 있는 생장조절제로서 이용가능이 있을 것으로 기대된다.

서태평양 마젤란해산군 OSM-XX 해저산 망간각의 광물학적, 지화학적 특성과 고해양 고환경 복원 연구 (Revealing the Paleo-ocean Environment of OSM-XX in the Western Pacific Magellan Seamount with Mineralogical and Geochemical Properties of Ferromanganese Crust )

  • 박진섭;양기호
    • 자원환경지질
    • /
    • 제56권1호
    • /
    • pp.55-63
    • /
    • 2023
  • 망간각의 지화학적, 광물학적 특성의 변화는 인근 환경 변화를 반영한다. 따라서 서태평양 마젤란해산군 OSM-XX의 망간각에 대한 특성 파악과 고해양 복원 연구를 위하여 지화학적, 광물학적 분석을 각각 micro X-ray fluorescence (μ-XRF) 과 X-ray diffraction (XRD)를 이용하여 실시하였다. OSM-XX의 망간각은 인산염화 여부 및 구조에 의해 인산염화 작용을 받은 부분(L4-L5), 인산염화 작용을 받지 않은 치밀한 부분(L3), 인산염화 작용을 받지 않은 다공성 부분(L1-L2)의 세 부분으로 구분되었다. 철망간 산화광물 층에서는 모두 버나다이트 피크가 확인되었으며, 인산염화 작용을 받은 부분은 carbonate fluorapatite(CFA)의 존재와 높은 Ca, P의 특성을 나타내었다. 인산염화 작용을 받지 않은 치밀한 부분은 높은 Mn, Ni, Co를 나타내었고, 인산염화 작용을 받지 않은 다공성 부분은 높은 Fe값과 detritus quartz, feldspar가 확인되었다. OSM-XX의 망간각이 성장하는동안 나타난 특성의 변화는 인근 해양환경의 변화를 반영하였다. 약 51.87 Ma의 연대를 나타내는 망간각의 인산염 퇴적체는 약 36-32 Ma의 전지구적 인산염화 작용에 의해 형성된 것으로 보이며, 이는 당시의 상승된 해수면 높이와 낮은 해수온을 지시한다. 또한, 치밀한 구조에서의 높은 Mn, Ni, Co, Mn/Fe 비는 강화된 산소최소층과 환원환경을 지시하며, 다공성 구조에서의 높은 Fe와 낮은 Mn/Fe 비는 약화된 산소최소층과 산화환경을 지시한다. 이는 마이오세-올리고세 경계의 Mi-1 빙하기가 끝난 후 환경변화를 반영하였다. 9 Ma부터 이어진 한랭화의 결과로 인한 저층류와 산소최소층의 강화에 의해 망간각 최외각의 Mn/Fe 비와 Co/Mn 비가 미세하게 증가하였지만, 6 Ma부터 태평양에 발생한 탄산염 용해율의 감소로 성장속도의 감소를 야기하였다.

OECD 10개국 노인의 소득불평등에 관한 연구 -생애주기관점을 중심으로- (A study of the income inequality of the aged in OECD 10 countries - Focusing on the life course perspective)

  • 지은정
    • 사회복지연구
    • /
    • 제42권1호
    • /
    • pp.333-370
    • /
    • 2011
  • 본 연구는 생애주기관점의 불평등 가설에 따라, OECD 10개국 노인의 소득불평등을 연구하였다. 불평등 요인 가운데 개인의 초기 사회적 지위는 교육수준, 사회구조·제도는 복지체제에 주목하여, 생애주기상 비노년기에서 노년기로 이행한 사람들의 소득불평등을 분석하였다. 자료는 유럽의 SHARE와 미국의 HRS 패널자료이다. 분석결과 첫째, 지체제와 교육수준이 주된 불평등 요인으로 나타났다. 둘째, 소득불평등은 비노년기 시점에서 노년기 시점으로 이행하면 다소 감소하지만, 여전히 상당히 높다(지니계수 .475). 복지체제별로 보면 보수주의 체제는 비노년기에도 소득불평등이 높은데, 노년기가 되면 더 높아져 누적 이익/불리 가설의 경향을 띤다. 자유주의 체제는 소득불평등이 높은 상태로 지속되어 지위유지 가설과 유사하다. 사민주의 체제는 비노년기에도 소득불평등이 낮은데, 노년기가 되면 더 낮아져 지위평등화 가설을 지지한다. 셋째, 비노년기에서 노년기로 이행하면 교육수준에 따른 누적된 이익/불리가 강화되어 총소득의 이질성이 커진다. 그러나 공적연금은 총소득보다 평등하게 분배되어 있다. 넷째, 복지체제별로 보면 자유주의 체제, 보수주의 체제의 공적연금은 비노년기보다 노년기에 더 불평등하게 분배되었다. 특히 보수주의 체제는 노년기의 소득불평등이 매우 높은데, 공적연금도 총소득만큼이나 불평등하게 분배되어 있다. 사회보장제도가 누적된 이익/불리를 강화하는 것으로 보인다. 반면 사민주의 체제는 공적연금이 총소득보다 평등하게 분배되고, 노년기가 되면 더 평등하게 분배되어 지위평등화 가설을 지지한다.

보건진료원의 정규직화 전과 후의 보건진료원 활동 및 보건진료소 관리운영체계의 비교 분석 (Comparative Analysis of Community Health Practitioner's Activities and Primary Health Post Management Before and After Officialization of Community Health practitioner)

  • 윤석옥;정문숙
    • 농촌의학ㆍ지역보건
    • /
    • 제19권2호
    • /
    • pp.141-158
    • /
    • 1994
  • 정부는 보건진료원으로 하여금 지역주민들에게 보다 더 의욕적으로 양질의 보건의료서비스를 제공하도록 하기 위하여 1992년 4월 1일부터 보건진료원을 별정직 공무원으로 정규직화 하였다. 본 연구는 보건진료원의 정규직화가 보건진료원의 업무활동과 보건진료소의 관리운영체계에 미친 영향을 분석하기 위해 경상남도와 경상북도의 보건진료소 중 집락추출법과 단순확률추출법으로 50개소를 뽑아 보건진료원을 대상으로 직접 면담조사하고 제반기록 및 보고서에서 필요한 자료를 발췌하였다. 조사기간은 1992년 1월 1일에서 3월 31일까지(정규직화 이전)와 1993년 1월 1일에서 3월 31일까지(정규직화 이후)였다. 보건진료원들의 96%가 정규직화를 원했는데 그 이유는 신분보장과 보수가 좋아지리라는 것이었다. 정규직화 후 보건진료원직을 자랑스럽게 생각한다는 사람이 24%에서 46%로 증가하였다. 신분보장에 대해서는 항상 불안하다는 사람이 30%에서 10%로 감소하였다. 정규직화 후 월평균 급여액은 802,600원에서 1,076,000원으로 34% 증가했으며 90%가 만족한다고 했다. 업무 내용별 자율성 인지정도는 업무계획, 업무수행, 진료소관리(재정)운영, 업무평가 영역에 대한 자율성 인지도가 정규직화 후에 증가되었다. 보건진료원의 활동내용 중 지역사회 자원파악, 지도작성상태, 지역사회조직 활용정도, 인구구조 파악정도와 가정건강기록부 작성은 정규직화 후에 특별한 변화는 없었다. 또한 집단보건교육, 개인보건교육, 학교보건교육의 실시도 정규직화 후에 변화가 없었다. 그러나 가정방문 실시현황은 1인당 월평균 13.6%회에서 정규직화 후에는 27.5%회로 늘었다. 모성보건 및 가족계획 사업 그리고 예방접종도 정규직화 후에 타기관에 의뢰하는 것이 더 늘었다. 통상질병관리 가운데 성인병관리는 3개월 동안 1개 진료소당 평균 고혈압환자는 12.7%명에서 11.6명으로, 암환자는 1.5명에서 1.2명으로, 당뇨병환자가 4.3명에서 3.4명으로 줄었다. 각종 기록부 비치상황은 장비대장, 약품관리 대장, 환자진료기록부는 100% 비치되었으나 기타 기록부는 그렇지 않았고 정규직화 후에도 변화는 없었다. 보건진료소가 보건소로부터 지원을 받는 내용은 약품 14.0%에서 30%로, 소모품 22.0%에서 52.0%로, 건물유지 및 보수가 54.0%에서 68% 로, 보건교육 자료가 34.0%에서 44.0%로 증가하였고, 장비는 58.0%에서 54.0%로 감소했다. 보건진료소의 월평균 수입은 진료수입이 약 22,000원 증가했고, 국비 또는 지방비 보조금이 4,800원에서 38,508%원으로 증가했으나 회비 및 기부금은 줄어 총수입은 약 50,000원 증가했다. 지출총액은 큰 변동이 없었다. 보건소로부터 3개월 동안 받은 지도감독 중 지시공문을 받은 진료소가 20%에서 38%로 늘었고, 방문지도는 79%에서 62%, 회의소집은 88%에서 74%로 감소하였다. 전화지도는 보건진료소당 평균 1.8회에서 2.1회로 늘었다(p<0.01). 면보건요원과의 협력관계가 있다고 한 보건진료원은 42%에서 36%로 감소하였다. 보건소장과의 관계가 좋다는 보건진료원이 46%에서 24%로 감소하였고, 보건행정계장과 관계가 좋다는 사림이 56%에서 36%로 감소하였다(p<0.05). 보건진료소 운영협의회 회장과의 관계가 좋다는 사람은 62%에서 38%로 감소되었고 보건진료소 운영협의회가 보건진료소에 별로 도움이 안된다와 전혀 도움이 되지 않는다는 사람이 정규직화 전과 후에 각각 92.0%, 82.0%였다. 운영협의회가 필요 없다는 사람은 정규직화 전에 4%에서 16%로 증가되었다(p<0.05). 보건진료원제도 발전을 위해 제안된 사항은 보건교육중심의 활동, 보건진료소운영의 자율성 보장 보건소에 경험이 풍부한 보건진료원을 두어 지도감독하게 할 것과 사용하는 약품의 종류를 늘려 줄 것 등이었다. 이상의 결과로 보하 정규직화 후 보건진료원의 역할, 기능 등의 업무활동의 변화는 거의 없었으나 신분보장과 봉급에 대한 만족도는 향상이 되었고 또한 자율성도 증가하였다. 보건소의 지원은 약간 늘었으며, 지도감독체제에서 지시 공문의 증가로 사무보고 업무가 많아지고, 근무 확인을 위한 전화감독은 늘었으나 업무치진을 위한 행정직 지도 또한 기술적 지도는 거의 없었다.

  • PDF

단위유량도와 비수갑문 단면 및 방조제 축조곡선 결정을 위한 조속계산 (Calculation of Unit Hydrograph from Discharge Curve, Determination of Sluice Dimension and Tidal Computation for Determination of the Closure curve)

  • 최귀열
    • 한국농공학회지
    • /
    • 제7권1호
    • /
    • pp.861-876
    • /
    • 1965
  • During my stay in the Netherlands, I have studied the following, primarily in relation to the Mokpo Yong-san project which had been studied by the NEDECO for a feasibility report. 1. Unit hydrograph at Naju There are many ways to make unit hydrograph, but I want explain here to make unit hydrograph from the- actual run of curve at Naju. A discharge curve made from one rain storm depends on rainfall intensity per houre After finriing hydrograph every two hours, we will get two-hour unit hydrograph to devide each ordinate of the two-hour hydrograph by the rainfall intensity. I have used one storm from June 24 to June 26, 1963, recording a rainfall intensity of average 9. 4 mm per hour for 12 hours. If several rain gage stations had already been established in the catchment area. above Naju prior to this storm, I could have gathered accurate data on rainfall intensity throughout the catchment area. As it was, I used I the automatic rain gage record of the Mokpo I moteorological station to determine the rainfall lntensity. In order. to develop the unit ~Ydrograph at Naju, I subtracted the basic flow from the total runoff flow. I also tried to keed the difference between the calculated discharge amount and the measured discharge less than 1O~ The discharge period. of an unit graph depends on the length of the catchment area. 2. Determination of sluice dimension Acoording to principles of design presently used in our country, a one-day storm with a frequency of 20 years must be discharged in 8 hours. These design criteria are not adequate, and several dams have washed out in the past years. The design of the spillway and sluice dimensions must be based on the maximun peak discharge flowing into the reservoir to avoid crop and structure damages. The total flow into the reservoir is the summation of flow described by the Mokpo hydrograph, the basic flow from all the catchment areas and the rainfall on the reservoir area. To calculate the amount of water discharged through the sluiceCper half hour), the average head during that interval must be known. This can be calculated from the known water level outside the sluiceCdetermined by the tide) and from an estimated water level inside the reservoir at the end of each time interval. The total amount of water discharged through the sluice can be calculated from this average head, the time interval and the cross-sectional area of' the sluice. From the inflow into the .reservoir and the outflow through the sluice gates I calculated the change in the volume of water stored in the reservoir at half-hour intervals. From the stored volume of water and the known storage capacity of the reservoir, I was able to calculate the water level in the reservoir. The Calculated water level in the reservoir must be the same as the estimated water level. Mean stand tide will be adequate to use for determining the sluice dimension because spring tide is worse case and neap tide is best condition for the I result of the calculatio 3. Tidal computation for determination of the closure curve. During the construction of a dam, whether by building up of a succession of horizontael layers or by building in from both sides, the velocity of the water flowinii through the closing gapwill increase, because of the gradual decrease in the cross sectional area of the gap. 1 calculated the . velocities in the closing gap during flood and ebb for the first mentioned method of construction until the cross-sectional area has been reduced to about 25% of the original area, the change in tidal movement within the reservoir being negligible. Up to that point, the increase of the velocity is more or less hyperbolic. During the closing of the last 25 % of the gap, less water can flow out of the reservoir. This causes a rise of the mean water level of the reservoir. The difference in hydraulic head is then no longer negligible and must be taken into account. When, during the course of construction. the submerged weir become a free weir the critical flow occurs. The critical flow is that point, during either ebb or flood, at which the velocity reaches a maximum. When the dam is raised further. the velocity decreases because of the decrease\ulcorner in the height of the water above the weir. The calculation of the currents and velocities for a stage in the closure of the final gap is done in the following manner; Using an average tide with a neglible daily quantity, I estimated the water level on the pustream side of. the dam (inner water level). I determined the current through the gap for each hour by multiplying the storage area by the increment of the rise in water level. The velocity at a given moment can be determined from the calcalated current in m3/sec, and the cross-sectional area at that moment. At the same time from the difference between inner water level and tidal level (outer water level) the velocity can be calculated with the formula $h= \frac{V^2}{2g}$ and must be equal to the velocity detertnined from the current. If there is a difference in velocity, a new estimate of the inner water level must be made and entire procedure should be repeated. When the higher water level is equal to or more than 2/3 times the difference between the lower water level and the crest of the dam, we speak of a "free weir." The flow over the weir is then dependent upon the higher water level and not on the difference between high and low water levels. When the weir is "submerged", that is, the higher water level is less than 2/3 times the difference between the lower water and the crest of the dam, the difference between the high and low levels being decisive. The free weir normally occurs first during ebb, and is due to. the fact that mean level in the estuary is higher than the mean level of . the tide in building dams with barges the maximum velocity in the closing gap may not be more than 3m/sec. As the maximum velocities are higher than this limit we must use other construction methods in closing the gap. This can be done by dump-cars from each side or by using a cable way.e or by using a cable way.

  • PDF