• 제목/요약/키워드: Reduce noise filter

검색결과 360건 처리시간 0.029초

지능형 TV의 음성인식을 위한 참조 잡음 기반 음성개선 (Reference Channel Input-Based Speech Enhancement for Noise-Robust Recognition in Intelligent TV Applications)

  • 정상배
    • 한국정보통신학회논문지
    • /
    • 제17권2호
    • /
    • pp.280-286
    • /
    • 2013
  • 본 논문에서는 지능형 TV의 음성인터페이스를 위한 잡음제거 시스템에 대해서 제안한다. 음성인식 성능 저하에 매우 나쁜 영향을 주는 TV 소리를 제거하기 위해서 TV 소리 자체를 참조 잡음으로 하는 잡음제거 알고리즘이 구현된다. 제안된 알고리즘에서 TV 스피커와 다채널 장비간의 전달함수를 추정한다. 그 후, 위너 필터를 동작시키기 위해서 잡음의 전력 스펙트럼이 추정된다. 추가적으로 후처리 과정이 적용되어 잔존 잡음을 제거한다. 실험의 의해서 제안된 알고리즘이 5 dB 입력 SNR에서 88 %의 음성인식률을 나타내었다.

응급상황에서의 음성인식을 위한 필터기 구현 (Implementation of Speech Recognition Filtering at Emergency)

  • 조영임;장성순
    • 한국지능시스템학회논문지
    • /
    • 제20권2호
    • /
    • pp.208-213
    • /
    • 2010
  • 일반적으로 음성인식 시스템의 사용에 가장 저해되는 요소에는 배경 잡음을 들 수 있다. 잡음은 음성인식 시스템의 성능을 저하시키고, 이로 인해 사용 장소의 제약을 많이 받게 되는 이유가 된다. 이런 잡음의 영향을 해결하기 위해 본 논문에서는 음질 향상에 목적을 두고 신호단계에서부터 잡음성분을 제거하는 필터 중 FIR필터의 대역통과를 이용하여 일반적으로 사람의 음성 주파수 영역과 잡음 영역을 추출한 정보를 토대로 Wiener 필터를 구현, 그 성능을 향상하여, 전송되어지는 음성신호구간에서 잡음구간과 음성구간에 따라 잡음을 유연하게 처리하도록 구현하였다.

SPD를 이용한 2.4 GHz PLL의 위상잡음 분석 (Phase Noise Analysis of 2.4 GHz PLL using SPD)

  • 채명호;김지흥;박범준;이규송
    • 한국군사과학기술학회지
    • /
    • 제19권3호
    • /
    • pp.379-386
    • /
    • 2016
  • In this paper, phase noise analysis result for 2.4 GHz PLL(phase locked loop) using SPD(sample phase detector) is proposed. It can be used for high performance frequency synthesizer's LO(local oscillator) to extend output frequency range or for LO of offset PLL to reduce a division rate or for clock signal of DDS(direct digital synthesizer). Before manufacturing, theoretical estimation of PLL's phase noise performance should be performed. In order to calculate phase noise of PLL using SPD, Leeson model is used for modeling phase noise of VCO(voltage controlled oscillator) and OCXO(ovened crystal oscillator). After theoretically analyzing phase noise of PLL, optimized loop filter bandwidth was determined. And then, phase noise of designed loop filter was calculated to find suitable OP-Amp. Also, the calculated result of phase noise was compared with the measured one. The measured phase noise of PLL was -130 dBc/Hz @ 10 kHz.

중력파 검출기의 양자 잡음 저감을 위한 필터 공동기 기반 주파수 의존 양자조임 기술과 KAGRA의 필터 공동기 제작을 위한 국제협력연구 (Frequency dependent squeezing for gravitational wave detectors using filter cavity and international collaboration of a filter cavity project for KAGRA)

  • 박준규;이성호;김창희;김윤종;정의정;제순규;성현철;한정열
    • 천문학회보
    • /
    • 제46권1호
    • /
    • pp.37.3-38
    • /
    • 2021
  • Radiation pressure noise of photon and photon shot noise are quantum noise limitation in interferometric gravita-tional wave detectors. Since relationship between the two noises is position and momentum of the Heisenberg uncertainty principle, quantum non-demolition (QND) technique is required to reduce the two noises at the same time. Frequency dependent squeezing using a filter cavity is one of realistic solutions for QND measurement and experimental results show that its cutting-edge performance is sufficient to apply to the current gravitational wave detectors. A 300m filter cavity is under construction at adv-LIGO. KAGRA (gravitational wave detector in Japan) has also started international collaboration to build a filter cavity. Recently we joined the filter cavity project for KAGRA. Current status of squeezing and filter cavity research at KASI and details of the KAGRA filter cavity project will be presented.

  • PDF

Filtering Correction Method and Performance Comparison for Time Series Data

  • Baek, Jongwoo;Choi, Jiyoung;Jung, Hoekyung
    • Journal of information and communication convergence engineering
    • /
    • 제20권2호
    • /
    • pp.125-130
    • /
    • 2022
  • In modern society, as many data are used for research or commercial purposes, the value of data is gradually increasing. In related fields, research is being actively conducted to collect valuable data, but it is difficult to collect proper data because the value of collection is determined according to the performance of existing sensors. To solve this problem, a method to effectively reduce noise has been proposed, but there is a point in which performance is degraded due to damage caused by noise. In this paper, a device capable of collecting time series data was designed to correct such data noise, and a correction technique was performed by giving an error value based on the representatively collected ultrafine dust data, and then comparing before and after Compare performance. For the correction method, Kalman, LPF, Savitzky-Golay, and Moving Average filter were used. Savitzky-Golay filter and Moving Average Filter showed excellent correction rate as an experiment. Through this, the performance of the sensor can be supplemented and it is expected that data can be effectively collected.

HST용 유압폄프.모터의 압력맥동 저감 특성 (Pressure Ripple Reduction of Hydraulic Pump-Motor in HST)

    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2003년도 춘계학술대회 논문집
    • /
    • pp.117-123
    • /
    • 2003
  • This paper deals with pressure ripple and noise reduction characteristics for a hydrostatic transmission(HST) consisting of a variable axial piston pump connected in an open loop to a fixed displacement axial piston motor. Pressure ripples in HST is major source of vibration, which can lead to fatigue failure of components and cause noise. In order to reduce the pressure ripple, an annular tube type hydraulic filter proposes to absorb pressure ripples with the high frequencies components to achieve better noise attenuation in HST. The basic principle tube is applied to propagation of pressure wave, reflection, absorption in cross section of discontinuity and resonance in the hydraulic pipeline. It is experimently confirmed that a hydraulic filter is absorbed to be about 30∼40dB of pressure ripple with high frequencies. These results will assist in modeling and design of noise reduction in hydraulic control systems, and here, should provide a means of designing a quieter HST.

  • PDF

PWM 인버터 시스템에서의 전도노이즈 저감을 위한 출력필터 설계에 관한 연구 (Output Filter Design for Conducted EMI Reduction of PWM Inverter-Fed AC Motor Drive System)

  • 김이훈;박규현;원충연;김영석;최세완
    • 전력전자학회논문지
    • /
    • 제6권6호
    • /
    • pp.546-555
    • /
    • 2001
  • 본 논문에서는 PWM 인버터-유도전동기 구동시스템의 전도노이즈 저감을 위한 출력필터 설계에 관한 연구를 수행하였다. 전도노이즈는 고전압 입력, 고용량 구동시스템 그리고 긴 전동기 터미널 등의경우에서 크게 문제가 된다. 고압력을 갖는 시스템에서는 높은 압력에 비례한 직류 링크 전압을 갖고 이에 따라 스위칭 dv/dt가 순간 최대 CM 접지전류를 발생시킨다. 그러므로 이에 대한 대책이 필요하다. 따라서 최근 산업 현장에서 많이 사용되고 있는 PWM 인버터를 설계 제작하여 유도전동기를 구동하고 이에 따라 발생되는 전도노이즈 성분을 감쇠 시킬 수 있는 출력필터를 설계하였고 제작 및 실험을 통하여 그 타당성을 입증하였다.

  • PDF

임펄스 잡음 제거를 위한 변형된 메디안 필터 (Modified Median Filter for Impulse Noise Removal)

  • ;김남호
    • 한국정보통신학회논문지
    • /
    • 제17권2호
    • /
    • pp.461-466
    • /
    • 2013
  • 사회가 고도의 디지털 정보화 시대로 발전함에 따라 영상복원 등 디지털 영상처리 기술분야에 관한 많은 연구가 진행되고 있다. 임펄스 잡음에 훼손된 영상을 복원하는데 대표적인 방법은 SM(Standard Median) 필터가 있지만, SM 필터는 에지영역에서 오류를 나타내어 영상의 품질을 저하시킨다. 본 논문에서는 임펄스 잡음환경에서 훼손된 영상을 복원하기 위해 화소를 중심으로 하여 이중 마스크를 취하는 변형된 메디안 필터 알고리즘을 제안하였다. 이중 마스크를 취함에 따라 제안한 방법은 우수한 잡음제거 및 에지보존 특성을 나타내었고 영상의 화질을 개선하였다.

효과적인 영상 잡음 제거를 위한 간략한 전처리 방법 (A Simplified Pre-processing Method for Efficient Video Noise Reduction)

  • 박운기;이상희;전병우
    • 방송공학회논문지
    • /
    • 제6권2호
    • /
    • pp.139-147
    • /
    • 2001
  • 영상에 포함된 잡음은 시각적인 문제를 일으킬 뿐만 아니라, MPEG이나 H.263과 같은 영상 압축 시스템의 부호화 효율을 떨어뜨린다. 따라서 영상 압축 시스템의 입력으로 이러한 잡음이 포함된 신호가 들어갈 때, 잡음 제거 필터를 사용하여 잡음을 제거한 후 영상 압축을 하는 것이 시각적인 면에서나 압축 효율적인 면에서 매우 효과적이다. 본 논문에서는 이웃한 4개의 화소값을 참조하여 잡음의 존재 여부를 판단하고, 판단 결과를 이용하여 선택적으로 잡음을 제거하는 적응형 십자형 중간값(median) 필터를 제안한다. 제안된 방법을 이용하면 전체 영상에 걸쳐 필터를 이용하는 방법에 비해 계산량이 50%이상 줄고, 영상의 필터 처리 후 에 나타나는 뭉개짐(blurring) 현상을 줄일 수 있다. 또한 잡음이 처리된 영상을 시간방향으로 Look-up 표에 따른 IIR필터를 통과시킴으로써 시간상으로 존재하는 잡음을 제거하여 동영상의 주관적 화질을 향상시킬 수 있다.

  • PDF

A Study on the Enhanced Filtering for the Removal of BEMF in BLDC Motors

  • Moon, Yu-Sung;Choi, Jae-Hyun;Kim, Jung-Won
    • 전기전자학회논문지
    • /
    • 제23권1호
    • /
    • pp.310-313
    • /
    • 2019
  • This paper used the majority function to digitally filter back-electromotive force as an explanation of the Brushless DC MOTOR control algorithm. The cause and improvement of motor noise, which are operating in close proximity to high frequency sources, did not use conventional low pass filter and comparator elements. Also, they repeatedly output a noise-free BEMF signal for the input value of the majority detection filtering. These filtering steps can help reduce costs and minimize the area of a PCB by requiring relatively little hardware.