• Journal of the Korean Wood Science and Technology
• /
• v.32 no.3
• /
• pp.79-87
• /
• 2004

The objectives of this study were to select superior fungus for lignin degradation and to decolor dyes by selected fungus. Ligninolytic fungi were screened and isolated from decayed woods. Ten ligninolytic fungi were selected by ligninolytic enzyme activity on the PDA media containing rhemazol brilliant blue R, guaiacol and gallic acid. Their lignin degradation abilities were tested on the extractive-free wood powder of Quercus acutissima and Pinus densiflora. As a result, 8J-28 was selected as superior fungus for lignin degradation. Also, decolorization abilities of dyes were examined by shaking and static culture. And congo red, crystal violet, poly R-478, methylene blue used to investigate decolorization abilities of dyes. As a result, 8J-28 showed over 90% in decolorization of congo red, crystal violet, poly R-478.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.677-684
• /
• 2016

This study was carried out to confirm the effects of the knife-incising and longitudinal kerfing treatment on high-temperature drying characteristics of red pine square timber with dimensions of thickness 15 cm. The range of final moisture content was investigated 5.6% to 7.5% after drying. The differences did not exist in the moisture content and distribution according to the pretreatment condition. In the case of longitudinal kerfing treatment, the surface check occurrence was reduced than the control. In addition, the twist had a tendency to decrease due to the longitudinal kerfing treatment. The knife-incising and longitudinal kerfing treatment were investigated to be ineffective on internal checks and drying shrinkage.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.119-124
• /
• 2011

In this study, we measured the smoke density characteristics to find the fire risk of Wood-Plastic composites (WPCs) which are one of spotlighting materials for landscape architecture and residential construction material with the cone calorimeter tester (by ISO 5660-2) and the smoke density tester (by ASTM E 662). In addition, the identical test was implemented to compare the smoke density characteristics between the red pine and the antiseptic wood. The result of cone calorimeter test showed that emissions of carbon monoxide, carbon dioxide and total smoke production rate of WPCs were higher than those of red pine and antiseptic wood. And the result of smoke density test showed that maximum specific optical smoke density(Dm) of WPCs was higher than that of red pine and antiseptic wood as well.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.2
• /
• pp.141-148
• /
• 2013

The goal of this study was to find the optimum lamina size from red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica) logs for the cross laminated timber (CLT) production. From visual inspection of the logs from two species, red pine log showed a larger knot and warp compared to the Japanese cedar. Different cross-sectional sizes of lamina ($110mm{\times}30mm$, $110mm{\times}40mm$, $110mm{\times}50mm$, $50mm{\times}30mm$, $30mm{\times}30mm$) from two species were analyzed for yield and grade. Regardless of the species, the optimized cross sectional size for maximizing the yield was $110mm{\times}30mm$. In grading for the different size laminas from Japanese cedar and red pine, a higher percentage of the first and second grade was found from the $110mm{\times}30mm$ lamina cut.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.691-699
• /
• 2014

In order to improve the dimensional stability and durability of wood, this study attempted to impregnate bismuth (Bi) - tin (Sn) alloy metal with low melting temperature into solid woods of three species such as radiata pine, red oak and white oak, and investigated to determine an optimum condition of manufacturing the metal alloy-wood composites with natural wood grains. These Bi-Sn alloys were chosen for this study because they were harmless to human and melting at low temperatures. The composites resulted in high dimensional stability and low thickness swelling, and also showed much improved performance such as high bending strength, high hardness, high electric conductivity, and high thermal conductivity as floor materials. A proper impregnating condition of all specimens was determined as 10 minutes of the preliminary vacuum time, and $185^{\circ}C$ of the heating temperature. The proper processing condition for radiata pine wood was 2.5 minutes of the pressuring time at the pressure of $10kgf/cm^2$. For red oak wood, 10 minutes of the pressuring time at the pressure of $30kgf/cm^2$ were the proper condition. The proper manufacture conditions for white oak wood was determined as 10 minutes of the pressuring time at the pressure of $50kgf/cm^2$.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.515-525
• /
• 2016

The Palsangjeon Pagoda is a five-story wooden building in the Beopjusa Temple area in the Songnisan national park in Chungcheongbuk-do, Korea. According to historical records, it was constructed in either AD 1605 or AD 1626. To specify the construction year more precisely, we took 41 wood samples for tree-ring analysis during repair actions in 2013; 28 from red pine (Pinus densiflora S. et Z.), 12 from oak (Quercus spp.), and 1 from fir (Abies spp.). The tree-ring boundaries became clearly visible by smoothing their cross-sectional surface and the tree-ring widths were measured under a stereo microscope. All tree-ring series were compared with each other to establish mean chronologies, which we then compared with local master chronologies established using tree rings collected from wooden elements of the Daeungjeon Hall which is the main building in the Beopjusa Temple area. As a result, it was verified that the red pines were felled in AD 1624 and in AD 1851. Moreover, it was verified that the oaks were also felled in AD 1624 based on cross-dating with the red pine chronology. We concluded that the Palsangjeon Wooden Pagoda was constructed in AD 1626, as mentioned in the historical record (Daeungdaekwangmyeongjeonbulsangki, 1630) and the letters on a purlin on the $4^{th}$ story, using oak and red pine felled in AD 1624 and repaired later on using red pine felled in AD 1851.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.33-37
• /
• 2009

Hanji is a traditional Korean handmade paper, made of bast fibers of the paper mulberry. Its fiber furnish is much more expensive than wood fiber furnish. Hanji with a low basis weight requires additional opacity and smoothness for better writing and printing. Filler such as calcium carbonate can not be used to raise the opacity of Hanji because of its low retention in low basis weight paper and the high freeness of the Hanji fiber furnish. Addition of red algae pulp, which is prepared from marine red algae to the Hanji fiber furnish negated retention problems happening in the case of mineral filler addition, and produced a substantial improvement in the opacity and smoothness of Hanji. The higher retention was due to the much larger size of the red algae fibers compared to the mineral fillers. The improvement in opacity and smoothness were also due to the shape of the red algae fibers: that red algae fibers are narrower in widths and shorter in lengths than wood fibers results in increased surface area and smoothness.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.95-104
• /
• 2009

The study was carried out to analyze wood quality of coffin board, the wood species of coffin excavated in Youngdong, Korea. All coffin woods were identified as hard pines, Korean red pine(Pinus densiflora S. & Z.). According to wood quality of coffins, inner coffins of Bae Cheon-Jo and his wife showed similarity and dissimilarity comparing with several literatures. The similarity was in the structure of panels, bottom lining board and charcoal layer, and the dissimilarity was in jointing. From the analysis of fibrous materials attached to coffin woods, the paper mulberry and cotton fibers were identified. In the inner coffin of Bae Cheon-Jo, tool traces by handle planer were observed.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.19-26
• /
• 1991

This study was carried out to investigate the solid wood bending properties of red pine(Pinus densiflora S. et Z.)naturally grown in Korea by boiling treatment The specimens were green and their dimension was $15\times15\times350mm$. The optimum conditions for solid wood bending processing of pine lumber are shown in Table 6 and the minimum solid bending radius was 240 mm in boiling treatment. The effects of knot on the degradation of bending processing properties were very severe and the failures of diagonal and torn grained wood were 20% and 30% respectively.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.151-162
• /
• 2012

Regarding experimental study on the dyeing properties of natural dye, I have dyed silk fabric with Styphnolobium japonicum, sappan wood, and indigo. The results of the experiment have been analysed by wavelength of maximum absorption, K/S and CIE Lab chromaticity co-ordinated. The results are as follows: In case of complex dyeing using Styphnolobium japonicum and sappan wood, dyeing with sappan wood, which is red related color, after dyeing with Styphnolobium japonicum, which is yellow related color, is more efficient. When dyeing was maden by complex of Styphnolobium japonicum and sappan wood, Dyeing method by the order of "Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$mordanting" made the best result of complex dyeing. In case of complex dyeing using Styphnolobium japonicum and Indigo, dyeing with Styphnolobium japonicum after the indigo made the best result. When dyeing with indigo first, and then Styphnolobium japonicum, yellow color was not well dyed, and low level of saturation caused lusterless color. Ordering of Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$indigo made the best result of complex dyeing in case of complex dying with Styphnolobium japonicum and indigo. Dyeing order, sappan wood first and then indigo last method shown 560~640 nm wavelength of maximum absorption which most color was blue related. In contrast, Indigo first and then sappan wood method shown 460~560nm wavelength of maximum absorption which color was red related. Complex dyeing with sappan wood and indigo was showing lusterless color. In case of dyeing with red and blue, dyeing with sappan wood and indigo was not appropriate.