• Journal of Korean Society of Forest Science
• /
• v.9 no.1
• /
• pp.55-60
• /
• 1969

In order to understand the growth percentage of red pine, author had 207 trees cut and made stem analysis on them and there by studied and analysed volume growth percentage, bark volume percentage, diameter growth percentage and the relation between diameter growth percentage and volume growth percentage and so forth. The result was as follows. 1. The volume growth percentage decreased as the age class increased and it was about 3% at the cutting age. 2. Bark volume percentage was about 5~15% and it seemed to be about constant irrespective of the age class. 3. The diameter growth percentage gradually decreased as the age class increased and it would be constant from a certain age class on. 4. As for the relation between the diameter growth percentage and volume growth percentage, the correlation ratio showed to increase with the age class increase generally the value of b was between 2.0~3.6.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.753-763
• /
• 2015

To identify the overall status of vegetation in the nine ridges of the Jeongmaeks located in South Korea, the types of forest vegetation were analyzed with focus on the names of the plant communities that appeared in each Jeongmaek. The vegetation investigation data for the entire mountain ranges were used for quantitative analysis (TWINSPAN, DCA), thereby classifying the plant communities and understanding the structures and characteristics of the vegetation. Upon review of the ratios of the number of plant communities by each ridge of the Jeongmaeks, a relatively larger number of communities were found to be dominated by deciduous oak trees in the Honam and Nakdong Jeongmaek. In addition, the ratios of communities where deciduous oak trees and deciduous broad-leaved trees appeared were higher in the Hannam-geumbuk, Nakdong, Honam, Geumnam-honam, Geumnam and Geumbuk Jeongmaeks. On the other hand, Naknam, Hannam, and Hanbuk Jeongmaeks were shown to have the type of forest vegetation in which the ratio of artificial forests was high. According to the results of the quantitative analysis, eight communities were grouped as follows: Celtis sinensis-Mallotus japonicus, Deciduous oak, Pinus thunbergii-P. rigida, Quercus mongolica-P. densiflora, Q. mongolica-Q. variabilis, Q. mongolica-P. densiflora, Q. mongolica-broad-leaved deciduous and Q. mongolica-P. koraiensis communities. The typical forest vegetations in the Jeongmaeks were the Q. mongolica-dominant community, the P. densiflora-dominant community, and the deciduous oak-dominant community.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.745-751
• /
• 2013

Environmental Specimen Banks (ESBs) have been established widely in the world since 1979 for monitoring long-term bio-accumulation of environmental pollutants. The ESBs perform the retrospective analysis of representative biological samples collected regularly and store them in cryogenic condition. In Korea, National Environmental Specimen Bank (NESB) was established in 2009. Since then, NESB had prepared the standard operating procedures (SOPs) for the seven kinds of specimens (Red Pine (Pinus densiflora), Common Carp (Cyprinus carpio), and etc.) for monitoring the effect of environmental pollution on the terrestrial ecosystem and river ecosystem. In 2012, NESB added Black-tailed Gull (Larus crassirostris)'s eggs to the list of the environmental specimen for monitoring marine environmental pollution. In this study, we sampled the eggs of the Black-tailed Gull on two islands (Baekryeongdo of the West Sea and Hongdo of the South Sea). Especially, we selected eggs which remained in the early stages of embryo development for certifying the consistent and stable monitoring for environmental pollutants in egg contents. However, it was not considered to classify an order of eggs per clutch in this study. It is known that the concentration variations of pollutants exist among eggs in one clutch. Therefore, it is needed to consider the positions of eggs in the laying sequences to meet the objective of bioaccumulation monitoring. We collected 30 eggs in each site but the amount may be insufficient to achieve storage target (over 2,000 g). Therefore, we need to consider an optimal sampling size.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.221-228
• /
• 1994

Respitation and growth rates of leaves, branches, stems and roots of 2 to 11-yr-old red pine trees(Pinus densiflora) were examined and applied to Thornley's growth equation, $$R=(\frac{1-Yg}{Yg})\frac{dW}{dt}+mW$$. The conversion efficiency of substrates(Yg), maintenance respiration coefficients(m), relative growth rates(${\mu}$) were estimated. The efficiency of conversion of substrates (Yg) was 0.3637g/g dw/yr and the maintenance respiration coefficient(m0 was 0.094g/g dw/yr. The relative growth rate(${\mu}$) was remarkably reduced with age from 0.90(2-year-old) to 0.33:11 year-old). The Ratio of gross respiration(R) per gross photosynthesis(Pg), R/Pg showed the range of 0.6~0.7 and annually 64% of Pg was spent for constructive respiration. The 3.4% of dry weight of whole tree was spent for maintenance respiration.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.165-173
• /
• 2012

In this work, scientific and systematic analysis was conducted for finding out the methods and techniques of ancient ink stick making. Analysis the ancient ink stick on ancient documents and wooden writing as letter or painting, we concluded as followings. From the analysis of ancient wood by dendrochronology, wood was cut at 1899, which provided the information on the year of ink stick's made on writing on ancient wood. Single particle size for soot of ancient ink stick was 107 nm for ink on the roof-filling timber in Sinsunwonjeon of Changdeok Palace, compared to 38 to 86 nm on the letter on ancient 12 paper document. Aggregate particle size was 370 nm for ink on the roof-filling timber in Sinsunwonjeon of Changdeok Palace, but 206 to 318 nm for aggregate particle size on 12 paper documents. There was similar pattern between single particle size and aggregate particle size of soot, which might provide the information of raw material for ancient ink. From infra-red and Raman spectroscopic analysis of sheet of writing on paper or wood, there was severe interference from background material (paper or wood). From Raman spectroscopic analysis of ancient ink carefully separated from ancient wood, spectrum pattern was closer to ink stick made by the soot from pine burning.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.456-462
• /
• 2015

365 pieces of domestic $38{\times}140{\times}3600mm$ Red pine structural lumber were machine graded conforming to a softwood structural lumber standard (KS F 3020). The allowable bending stresses calculated for each grade were compared with the values currently tabulated in the standard. Four calculation methods for lower $5^{th}$ percentile bending stress were non-parametric estimation with 75% confidence level, 2-parameter and 3-parameter Weibull distribution fit, and bending modulus of rupture (MOR)-modulus of elasticity (MOE) regression based method. Only the data set of Grades E8, E9, and E10 were statistically eligible for the $5^{th}$ percentile calculation. The MOR-MOE regression based method only was able to estimate the lower $5^{th}$ percentile values theoretically for the full range of grades. The results showed that all allowable bending stresses calculated were lower than the design values tabulated in the standard. This implies that the current machine grading system has the pitfall of structural safety. Improvement in current machine grading system could be achieved by introducing the bending strength and stiffness combination grade system.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.50-56
• /
• 2007

FAO standard for heat sterilization of wood, International standards for phytosanitary measures (ISPM) No.15, must meet heat-treated wood core temperature to be higher than $56^{\circ}C$ and keep the temperature for more than 30 minutes. This study was carried out to analyze the heat treatment characteristics of domestic pinewood sterilized with the FAO standard. To enhance the effectiveness of heat treatment process in mountainous district energy consumption and time required to reach target temperature were evaluated at various temperature and relative humidity conditions and moisture contents of wood. Heat-treatment of high temperature and high humidity reduced the required heating time. Lower humidity levels at same temperature reduced energy consumption per unit time. However, lower humidity levels could not reduce total energy consumption greatly because longer treatment time was required at that condition. It is necessary to estimate energy consumption and predict treatment time in dynamic heating and cooling situations, because it frequently happens not to meet optimum treatment condition due to poor surrounding climates and operation performance of heat treatment facility in real field.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.397-405
• /
• 2018

Currently, there are very few studies on Korean wall paintings. Therefore, this study discusses the current conditions of wooden paintings and the characteristics of the adhesive agent in the painting layer separation. Korean land pine was chosen as the support, while white oysters shells, orpiment, red ocher, Noerok, and azurite were used as pigments. With four adhesive agents, including animal glue, Gelidium, methyl cellulose, and PVAc (caparol binder), a comparative experiment was conducted, by dividing them into two concentrations, of 0.5% and 1.5%. The temperature, humidity, and ultraviolet rays, which are contributing environmental factors in cultural assets after fixing, were artificially investigated. After deterioration, observed color difference, fixing, and the surface. Results showed that the animal glue strongly fixing all the colored layers compared to the other adhesives; however, azurite had a partial change when used outdoors. With Gelidium, which functioned similar to animal glue, the azurite was affected by the ultraviolet rays; nevertheless, despite the variations in temperature and humidity, it had the best gripping force compared to the other adhesive agents. Methyl cellulose was glossy at a high concentration, and was relatively strong against rapid changes in temperature and humidity. PVAc significantly reduced the binding force, compared to other adhesive agents.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.271-278
• /
• 2006

As for red pepper seasoning oil (RPSO), seasoning oil (SO) and pine needle oil (PNO), various organic solvent extracts from rosemary powder and tocopherol are treated as control group. At this time, amounts that are treated were all 1,000 ppm. It was observed by AV (acid value), POV (peroxide value) and carbonyl compounds content of the stored samples during 3 months at 60${\pm}$2$^{\circ}C$ incubation. Tocopherol was shown to be pro-oxidant than the antioxidant in all seasoning oil samples. Icreasing effect of storage stability of chloroform/MeOH extract was the most superior one. Final result of icreasing effect of storage stability from the determinated data was as follows. The storage stability of solvent system by AV and POV analysis was in the increasing order of chloroform/MeOH extract> ethyl alcohol extract>hot water extract>ethyl acetate extract>acetone extract>none treating group> tocopherol treating group, POV was chloroform/MeOH extract>ethyl alcohol extract ${\geq}$ ethyl acetate extract> acetone extract ${\geq}$ hot water extract>none treating group>tocopherol treating group and by carbonyl compound content analysis was in the increasing order of chloroform/MeOH extract>ethyl acetate extract>ethyl alcohol extract>hot water extract>acetone extract>none treating group>tocopherol treating group.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.112-121
• /
• 2015

In this study, Copper Azole (CuAz), a domestically available wood preservative for pressure treatment, was employed to perform an experimental research on its infiltration and decay properties in Japanese Red Pine. Test specimens were pressure-injected with CuAz-2 preservative to measure its preservative effectiveness, and then its impact on weight and mass losses. Furthermore, wood specimens were treated with CuAz-2 preservatives of various concentration levels before they were decayed with brown-rot-fungi in order to observe decay properties on light microscope (LM) and field emission scanning electron microscope (FE-SEM). As a result, untreated specimen by Fomitopsis palustris showed the mass loss of more than 40%, and the value of preservative effectiveness of CuAz-2 by indoor decay was $1,73-3.32kg/m^3$. The concentration levels of CuAz-2 preservative were shown to cause significant variations in terms of decay progresses in the cross section, radial section, and tangential section. By contrast, untreated specimens had underwent serious decays in early wood, late wood, longitudinal resin canals, and ray, which led to vertical destruction of wood texture. As for the radial section, ray tracheid, ray parenchyma cell, and window like pits were decayed and destroyed. In the case of tangential section, uniseriate rays and vertical resin canals were seriously decayed. In conclusion, this study indicates that the adequacy of the current CuAz injection amount should be reviewed in the domestic environment because there are significantly different decays at different decay conditions.