• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.9-15
• /
• 2001

Specific energy curves for water removal in vacuum-press drying of different thick softwoods of red pine (Pinus densiflora), white pine (Pinus koraiensis), larch (L. leptolepis) and Western hemlock (Tsuga heterophylla) were split into three sections: increased slowly, fairly constant, and increased rapidly. Calculated specific energy for 3, 5, 7, 9 and 11cm thick lumber was a value of 0.483, 0.649, 0.814, 0.977 and 1.138kWh/kg of water, respectively. Specific energy almost linearly increased as lumber thickness increased, and specific energy for severe schedule was less than that for mild schedule. Average specific energy was 0.712kWh/kg and vacuum-press drying consumed less energy as compared with any other drying methods.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.797-808
• /
• 2017

Automatic wood species identification systems have enabled fast and accurate identification of wood species outside of specialized laboratories with well-trained experts on wood species identification. Conventional automatic wood species identification systems consist of two major parts: a feature extractor and a classifier. Feature extractors require hand-engineering to obtain optimal features to quantify the content of an image. A Convolutional Neural Network (CNN), which is one of the Deep Learning methods, trained for wood species can extract intrinsic feature representations and classify them correctly. It usually outperforms classifiers built on top of extracted features with a hand-tuning process. We developed an automatic wood species identification system utilizing CNN models such as LeNet, MiniVGGNet, and their variants. A smartphone camera was used for obtaining macroscopic images of rough sawn surfaces from cross sections of woods. Five Korean softwood species (cedar, cypress, Korean pine, Korean red pine, and larch) were under classification by the CNN models. The highest and most stable CNN model was LeNet3 that is two additional layers added to the original LeNet architecture. The accuracy of species identification by LeNet3 architecture for the five Korean softwood species was 99.3%. The result showed the automatic wood species identification system is sufficiently fast and accurate as well as small to be deployed to a mobile device such as a smartphone.

• Journal of Ecology and Environment
• /
• v.32 no.1
• /
• pp.55-60
• /
• 2009

We analyzed the factors driving succession and the structure, and dynamics of vegetation on sand and gravel bars in order to clarify the differences in vegetation succession in rivers with different river bed substrates. Woody plant communities (dominated by Salix), perennial herb communities (dominated by Miscanthus), and annual plant communities (dominated by Persicaria) appeared in that order from upstream to downstream on the sandbar. The results of DCA ordination based on vegetation data reflected a successional trend. This result suggests that sandbars grow in a downstream direction. Various vegetation types different in successional stage, such as grassland, young stands of Korean red pine (Pinus densiflora), two-layered stands of young and mature pines, and mature pine stands also occurred on gravel bars, but the vegetation in earlier successional stage was established upstream, which is the opposite to the direction found on sandbars. Those results demonstrate that the dynamics of the bed load itself could be a factor affecting vegetation succession in rivers. In fact, sands suspended by running water were transported downstream over the vegetated area of sand bar and thereby created new areas of sandbar on the downstream end of the sandbar. Meanwhile, gravel, which is heavy and thereby is shifted by strong water currents, accumulated on the upstream end of the vegetated area, and thus created new areas of gravel bar in that direction. These results showed that allogenic processes drive vegetation succession on sand and gravel bars in streams and rivers.

• Korean journal of applied entomology
• /
• v.10 no.1
• /
• pp.43-48
• /
• 1971

This experiment was conducted to determine the most effective type of Bight·trap for pine catepillar moths (Dendrolimus spectabilis B.) and to investigate the environmental factors affecting the attractiveness of the moths.. The various types of light traps made used of: black light, white light, fluorescent light, yellow light, and red light and the environmental factors considered were rainfall, wind velocity and collecting time. All the traps were operated from 8 in the evening to midnight. The results obtained are summarized as follows; The most effective attraction of moths ($62\%$ of total number attracted) was observed with blacklight-lamp and the most abundant attraction of the moths was found from 8 to 10 in the evening. Attractiveness in terms of sex ratio attracted from 8 to 10 in the evening was found to the .approximately 7 female to 1 male, Environmental factors considered were found to have no influences in attractiveness of the moths in this experiment.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• Journal of Environmental Impact Assessment
• /
• v.21 no.2
• /
• pp.327-338
• /
• 2012

Environmental specimen banks provide the baselines for the scientists and decision makers to do research using the past and present specimens to expect the possible contaminant implications of the future. Many chemicals that are considered harmless now but not found may be found and pose threats in the future. Collected specimens of animals and plants should be conserved without contamination for future analysis. To ensure the availability of samples for the retrospective analysis, the establishment and maintenance of specimen banks in the developing and developed nations has become absolutely necessary. National Environmental Specimen Bank (NESB) established at National Institute of Environmental Research (NIER) in 2009. For the application of NESB, several activities such as standard operating procedures (SOPs) development have been prepared. This study applied the guidelines for sampling and sample treatment of five environmental specimens which had been prepared from 2007 to 2009. The target species were shoots of red pine and Korean pine, leaves of Mongolian oak, eggs of domestic pigeon and muscles and livers of common carp. The NESB will enhance the quality of environmental assessment and environmental monitoring based on real time and retrospective analysis.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.5
• /
• pp.83-92
• /
• 2013

The present study documented the characteristics of habitats and nests of Goshawk [Northern goshawk] Accipiter gentilis breeding in Gongju-si, Chungcheongnam-do and Haepyung, Kyungsangbuk-do, Eumsung-gun, Chungju-si, Chungcheongbuk-do from April 2007 to August 2011. Breeding habitat includes of mixes and deciduous trees and ravine forest, ranging from small to large areas and it used make a new nest and fix up the old nest at Goshawk. Goshawk make nests on Japanese larch Larix leptolepis, Japanese red pine Pinus densiflora and Pitch pine Pinus rigidae of $15.8{\pm}2.36m$ (range=7.4~18.7m) in height and $34.6{\pm}7.38cm$ (range=20.8~47.4cm) in diameter-at-breast height (DBH). It has $135.8{\pm}3.37cm$ in outer diameter of nest, $26.2{\pm}2.39cm$ in inner diameter, $7.1{\pm}1.41cm$ of depth, and $3.1{\pm}0.40Kg$ of weight. Breeding habitat (n=13) has 5~7 nests. It has 7 (53.8%) nest in fix up the old nest and 4 (30.8%)nests in make a new nest.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.6
• /
• pp.836-850
• /
• 2012

This study was conducted to identify the sensory characteristics of the Korean traditional confectionery, dasik, prepared under different conditions and to compare their consumer acceptance in Korea. To accomplish this, descriptive analysis of eight samples prepared using two types of rice cake powder, dasik (Rflour, Rflour_Omija), brown rice powder red ginseng dasik (Brice_Ginseng_P), pinepollen dasik (PineP), black sesame dasik (BSesame), bean dasik (Rbean), and two types of mungbean starch dasik (Starch_Omija, Starch_Greentea), was conducted by ten trained panelists. In addition, 81 consumers evaluated the overall acceptance (OL), acceptance of appearance (APPL), odor (ODL), flavor (FLL), and texture (TXTL) of the samples using a 9-point hedonic scale, as well as the perceived intensities of sesame flavor, sweetness, and hardness using a 9-point just-about-right (JAR) scale. Partial least square- regression (PLSR) indicated that the BSesame and Rbean samples, which had significantly (p<0.05) high roasted sesame, burnt, greasy, glossy, and cooked chestnut flavor scores, had the highest acceptability and consumer desire scores. Additionally, the PineP and Rflour_Omija samples, which had relatively high particle size, transparency, roughness, spoiled tofu, fermentation and raw rice flavor scores, were the least preferred samples. Therefore, roasted sesame, burnt, greasy, glossy, and cooked chestnut flavor attributes were considered drivers of "liking" whereas particle size, transparent, roughness, spoiled tofu, fermentation, and raw rice flavor attributes acted as drivers of "disliking" among consumers.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.27-35
• /
• 2007

This experiment was carried out to investigate the appearance and surface gluing characteristics of laminated boards overlaied with teak sliced veneer, printing paper, wall paper, cotton cloth, and wool cloth, The overlaying sheets were glued on the laminated boards with polyvinyl acetate emulsion adhesives and the species for laminated boards was red pine. The obtained results are summarized as follows; in case of the teak sliced veneer overlaied boards, the appearance quality was very good and showed the first grade of KS standard. but the delamination rate was 44.0% and 895% for cold water or warm water dipping treatments, respectively, so the wet gluing properties were very bed. In the case of the paper or cloth overlaied boards, the appearance quality was same good and showed the first grade of KS standard, but their delamination rate was 10~20% and 39.3~49.0 for cold water or warm water dipping treatments, respectively, so the wet gluing properties were bed, relatively better than sliced veneer overlaied boards. The present work showed that appearance of laminated boards overlaid with several sheets appeared quite positive in terms of secondary gluing qualities of laminated boards, suggesting that sliced veneer, paper, and cloth would be appropriate for the overlaying materials of laminated boards.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.87-96
• /
• 2005

This study was carried out to evaluate the shear bond strength and adhesive bond durability of structural glued laminated timber (glulam) manufactured with mixed species lumber of Korean red pine, Korean pine and Japanese larch, using resorcinol adhesive and water-based polymeric-isocyanate adhesive (WPI). Each board used as a glulam lamina was graded by visual inspection. The visual lumber grade of the all species was very low due to the large size and number of knots and the steep slope of grain. In view of the results, appropriate pruning, sawing and drying processes might be needed to produce high grade lamina lumber with small knot size and drying defect free. Shear bond strength of every tested glulam specimen ranged between 7.9 and $9.9N/mm^2$, and much higher than the Korean Standard (KS) for glulam shear bond strength, $7.1N/mm^2$. There was not much shear bond strength difference between wood/resorcinol and wood/WPI. The resorcinol adhesive bond durability exceeded KS requirements. However, delamination on the end-grain surfaces of WPI glulam submerged in both room temperature and boiling water severely occurred, and its durability did not meet KS requirements. Further investigations may be required, and special care should be taken, to ensure long service life of WPI glulam used for exterior application. Results of this study are expected to be useful for improvement of mechanical properties and structural performance of mixed species glulam.