• Journal of Microbiology and Biotechnology
• /
• v.27 no.3
• /
• pp.507-513
• /
• 2017

Bacillus subtilis spores can be used for protein display to engineer protein properties. This method overcomes viability and protein-folding concerns associated with traditional protein display methods. Spores remain viable under extreme conditions and the genotype/phenotype connection remains intact. In addition, the natural sporulation process eliminates protein-folding concerns that are coupled to the target protein traveling through cell membranes. Furthermore, ATP-dependent chaperones are present to assist in protein folding. CotA was optimized as a whole-cell biocatalyst immobilized in an inert matrix of the spore. In general, proteins that are immobilized have advantages in biocatalysis. For example, the protein can be easily removed from the reaction and it is more stable. The aim is to improve the pH stability using spore display. The maximum activity of CotA is between pH 4 and 5 for the substrate ABTS (ABTS = diammonium 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate). However, the activity dramatically decreases at pH 4. The activity is not significantly altered at pH 5. A library of approximately 3,000 clones was screened. A E498G variant was identified to have a half-life of inactivation ($t_{1/2}$) at pH 4 that was 24.8 times greater compared with wt-CotA. In a previous investigation, a CotA library was screened for organic solvent resistance and a T480A mutant was found. Consequently, T480A/E498G-CotA was constructed and the $t_{1/2}$ was 62.1 times greater than wt-CotA. Finally, E498G-CotA and T480A/E498G-CotA yielded 3.7- and 5.3-fold more product than did wt-CotA after recycling the biocatalyst seven times over 42 h.

• Applied Biological Chemistry
• /
• v.27
• /
• pp.68-79
• /
• 1984

An increased population and rapidly expanding industrial development have led to enormous amounts of various domestic and industrial wastes. The proper disposal of ever-increasing wastes is a growing global problem. Land treatment is one of the rational approaches that are environmentally safe and economically practical. It has long been practised in many sites. Recycling of industrial wastes on agricultural land can provide better possible means for maintaining environmental quality and utilizing waste-resources. Even though industrial wastes are beneficial as soil amendment and fertilizer, they have some limitation on land application because of wide variability as well as physicochemical problem in their composition. A direct application of solid and liquid wastes on land is being practised in Korea and some experimental results are presented. The direct application of fermentation waste on rice resulted in a 6 percent yield increase. Another organic residue from glutamic acid fermentation is widely used not only as a direct application as a liquid fertilizer but also for a raw material of organic compound fertilizer. These wastes are much promising as sources of plant nutrients, since they have large amounts of nutrients, especially nitrogen with few toxic metals. On the other hand, fertilizers developed from inorganic industrial wastes include calcium silicate, calcium sulfate and ammonium sulfate. The calcium silicate fertilizer simply produced from slag, by-product of iron and steel manufacturing plant is one of the most successful example of the conversion of wastes to fertilizer and slag production capacity totals to over three million MT/year. About 200,000 MT of calcium silicate fertilizer is currently applied in the paddy rice every year. Calcium sulfate, a waste from the wet phosphoric acid process is to some extent used as a filler of compound fertilizers but quite large quantites are directly applied for the reclamation of tidal flat.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.133-140
• /
• 2002

Phosphogypsum is a by-product from the phosphoric acid process for manufacturing fertilizers. It consists mainly of $(CaSO_4.2H_2O)$ and contains some impurities such as$(P_2O_5)$, 불소$(F_-)$, and organic substances. The annual world production of this material is up to 150 million tons and is up to 1.57 million tons in Korea. Therefore studies describe application of phosphogypsum to daily and middle cover materials in landfill. For this Purpose, experiments were performed to evaluate the engineering properties of the material by sieve analysis, specific gravity, consistency of soil, compaction, CBR, permeability, mi environmental characteristics of leaching test, reactor test. The results of this study are as follows : The mixing and layer conditions of CBR value are 6.2~6.3%, coefficient of permeability is $\alpha$$\times10_{-5}~10_{-6}cm/sec$. And leaching test results are far below than those of regulatory requirement of Waste Management Act, Soil Environment Preservation Act in Korea and RCRA in USA. Therefore phosphogypsum can be used as daily and intermediate cover materials in landfill.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.25 no.1
• /
• pp.93-98
• /
• 2012

Nutrition value of mealworm, Tenebrio molitor was analyzed due to increasing demand of usage as a protein source for domestic animals and even further for human consumption. The purpose of the present work was to determine the chemical compostion of the Tenebrio molitor larvae, adult that were maintained under standard condition for further usage of mass-rearing system and its exuvium, and excreta. Tenebrio molitor, larvae, adult, exuvium and excreta contained 46.44, 63.34, 32.87, and 18.51% protein respectively, suggested that even excreta could be used as an additional supplement in food recycling process. This protein was also rich in amino acids such as Isoleucine, leucine and Lysine which all met the nutritional value recommended by the Food and Agriculture Organization. Fatty acid composition was detected with high component of oleic acid (C18:1), along with linoleic acid (C18:2) and palmitic acid (C16) in all adult, larvae, exuvium and excreta. These oleic acid (C18:1), linoleic acid (C18:2) and palmitic acid (C16) components were the same or even highly contained in excreta of mealworm 22.29, 47.19 and 19.17% respectively. Longer chains of unsaturated fatty acids consisted of two to three double bonds are known as healthy product was recognized in large amount. These results show new ways to consume mealworms and its waste for animal and human consumption.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.3
• /
• pp.82-88
• /
• 2005

This study was carried out to investigate on the change of NaCl content during the food waste composting and on the safety of food waste compost(FWC) manufactured by the non-stirrer sealed fermenter. Plant culture test with pepper crop was also performed to see the effect of FWC, which was produced by the G co. ltd., on the growth of peper and migration of NaCl in soil. The culture test was performed at the farmland in Chungnam National University. The results were as follows; the NaCl content was gradually accumulated during food waste composting process, probably through water evaporation. Sodium concentration was, however, remarkably decreased at the final stage due to the desalting effect by water which was concentrated on the ceil of the fermentor. The analysis of chemical properties and humidity parameters on the food waste compost revealed that the product is quite a good qualified one. More than 0.5 tons of FWC application on red pepper cultivation caused diminished effect on the yield and the accumulation of salts on soil.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.86-92
• /
• 2000

This study was conducted to determine the optimal mixing ratio of the paper mill sludge(PMS) and pig manure(PM). Since the former contains lots of total carbon and low nitrogen, it was used as carbon source. Also, dried paper mill sludge(DPMS) was added to the mixture to control the water content. The treatments was composed of four as follows, PMS-100(PM 0%+PMS 80%+DPMS 20%), PMS-85(15+65+20), PMS-70(30+50+20), and PMS-55(45+35+20). The mixtures were composted under aerobic condition in $1.25m^3$ static piles. The piles were aerated for 15 minutes per day and turned over the mixture once a week at the early stage of composting. To estimate the maturity of composts, the changes of physico-chemical properties such as temperature, pH, C/N ratio and color were monitored every week. The 25-30 and 55-60% as optimal condition of C/N ratio and moisture content were respectively recommended for effective composting by the evaluation of the changes of phsico-chemical properties for materials taken from compost files during the composting period. When the 30 and 45% of PM were mixed with PMS, the maturity time at least demanded to the stable state were shortened and the qualify of the final product was improved in a view of nutritional components.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.420-429
• /
• 2002

The amount of $CO_2$-silicate bonded waste foundry sand(WFS) occurred in Korea is over 800,000 ton per year. WFS, as a by-product, is generated through manufacturing process of foundry may affect our environmental contamination, The reason is that WFS has been buried itself not less than 90％ out of total WFS. So, it can give damage on the ground of contamination in soil and underwater. Therefore, it is necessary to establish the method recycling WFS because of being intensified waste management law. In this study, we performed the research with respect to harmful component analysis, the qualities of WFS mortar and concrete mixed with WFS. As the results the specific gravity of WFS is the same as that of natural aggregate while unit weight and percentage of solids of WFS are smaller than those of it. But it is found that WFS can be used by substituting WFS for natural aggregate after control of poor grade of WFS. The flowability of mortar and concrete with WFS is inferior to those of natural aggregate, and the setting time of concrete with WFS is faster than that with only natural aggregate, On the contrary, the bleeding of concrete with WFS is shown good result, and compressive and tensile strength of concrete substituted WFS for 30％ are higher than those with only natural aggregate regardless of elapsed time.

• Clean Technology
• /
• v.27 no.4
• /
• pp.297-305
• /
• 2021

In the domestic aluminum industry, the extrusion process is a major process accounting for more than 40% of the total production. However, most domestic aluminum extrusion companies produce aluminum using old equipment that is more than 30 years old. Extrusion press is when the equipment is not replaced before the wear and breakage of major parts occur, reducing productivity and increasing the defect rate compared to new equipment. The old extrusion press often loses part drawings, so it is difficult to repair them properly on-site and to remanufacture them due to the lack of technical skills for maintenance. Therefore, a systematic remanufacturing plan must be designed from dismantling the equipment. In this study, remanufacturing FMEA was devised to remanufacture old extrusion press. The risk priority was analyzed by considering the degree of damage to the recycled parts, the cycle due to breakage/damage during the extrusion process, and the value of recycling resources due to remanufacturing. To standardize the remanufacturing process, remanufactured FMEA was performed through part analysis according to the structural analysis of the extrusion press. In addition, remanufacturing priorities were selected for each part, while remanufacturing itself was studied for efficiency of resource circulation and product quality stabilization.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.637-649
• /
• 2011

Environmental protection has become more important than ever because of increasing environmental pollution and abnormal climatic changes caused by the depletion of resources from industrial activities. Fashion products can create various environmental pollutants during the production process. Since they are in direct contact with the body, the environment-friendly features for the fashion industry will become increasingly important and the necessity to execute a detailed study regarding the environment-friendly fashion marketing will also become increasingly important. The purpose of this study was to segment the levels of environment-friendly fashion marketing mixes, that analyze the relationship between consumer decision-making factors and purchasing intentions. We propose effective several marketing strategies. A total of 457 questionnaires were analyzed using frequency analysis, t-tests, correlation analysis, regression analysis, and ANOVA in SPSS. The results are as follows: First, environment-friendly fashion products were segmented into four groups, environment-friendly materials, environment-friendly production, environment-friendly management, and recycling/ disuse of products. Second, the promotion of environment-friendly fashion products were highly ranked, followed by materials used, distribution methods, and production management. Third, women considered usage, management, and price for environment-friendly fashion products as more important than men did. Finally, a total of 39.4% of the respondents had purchased environment-friendly fashion products, with a preference to buy environment-friendly underwear, outerwear, bags, shoes, and accessories. By establishing and executing the environment-friendly fashion marketing mixes, fashion companies execute successful marketing activities in both domestic and international markets.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.294-301
• /
• 2013

Sustainable fashion & textile is more than eco fashion & textile with the concepts for the next generation's happiness, prosumer value, and community responsibility. This study considers methods to enhance fashion and textile industry sustainability in accordance to clothing types (material, product life and washing properties) and to investigate company strategies. Company strategies are of redesign with stock, volunteering & measuring trash amount, participation by evaluation stores, clerk environment education, hiring QC specialist and reinforcing partnerships. For the case of daily innerwear, throwing away and recycling is more efficient for the environment than laundering in the consumer use stage; subsequently, we recommend the use of polypropylene fiber (a cheap and an eco-friendly material) for this item that can be recycled and reformed after use. For the case of single layer clothing (such as sportswear, blouse or pants) we recommend the use of thermoplastic materials with welding or fuse assembling technology instead of a sewing method of seams as well as the recycle design that is simply melted and reformed into new clothing without an after use dissembling process. Secondhand use or resale is suitable for denim/jean items if the clothing has a storytelling or private history tag. Lastly, module-type jacket or coat shows the variety of styles with one clothing worn w/o collar or sleeve details and changed into vest/coat; in addition, it is possible to add or partly tear off some jacket/coat fibers of the felt material to reform it into a new design.