• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.503-508
• /
• 2015

The adsorption characteristics of ammonia on MSWI bottom ash were investigated. The effect of the variation of the landfill environmental parameters including pH, anions and organic matter on the adsorption process was discussed. Results showed that the adsorption could be well described by pseudo-second-order kinetics and Langmuir model, with a maximum adsorption capacity of 156.2 mg/g. The optimum adsorption of ammonia was observed when the pH was 6.0. High level of ion and organic matter could restrict the adsorption to a low level. The above results suggested that MSWI bottom ash could affect the migration of ammonia in the landfill, which is related to the variation of the landfill circumstance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.105-114
• /
• 2022

As the national income level is improving, housing urbanization and economic speed are progressing rapidly, household waste and food waste are rapidly increasing. The "Waste Management Act" (founded in 1991) introduced the volume-based household waste system in 1995, and even after implementation, the odor of food waste and the prompt disposal process continue to be a social problem.For this reason, the food waste recycling business is attracting attention. In this paper, regarding the role of resource recycling such as feed, compost, and other resources of food waste, this thesis aims to reduce the inefficiency of the recycling process. Data Envelopment Analysis (DEA) of the relationship between inputs and outputs of 33 facilities nationwide, excluding facility data (insufficient) among 394, (238 public, and 156 private ones), as of the end of 2020, which is running a domestic resource recycling project This study was conducted to investigate the important role in the relative management performance of food waste recycling facilities.It was hypothesized that the influence of business history, facility capacity, capital, and machinery of a company running a food waste recycling business on sales was tested.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.81-92
• /
• 2009

This study investigated the occurrence of residues derived animals produced during the process of slaughter and the subsequent channels of processing those residues derived animals; the status of recycling of these residues derived animals by recycling business is investigated to utilize the results as the basic data for management purposes. At present, animal slaughter is highly specialized and the residues derived animals obtained from the slaughter of animals are separated and dissected into different parts to serve as fodder and residual compost. Some of the residues derived animals obtained from slaughter, which are edible are utilized for edible purposes and those parts which are not edible such as horns, claws, fats etc. are confirmed to be recycled. Poultry residues derived animals are mostly recycled as single-component feed, used as original forms, residual compost whereas fish remains are recycled mostly as singlecomponent feed etc. Most of the companies that recycle residues derived animals are situated in provinces such as Jeollanamdo, Jeollabukdo, Gyeongsangnamdo, Gyeongsangbukdo, where many of the slaughterhouses are located. And many of these recylcing business find themselves in the vicinity of these slaughterhouse. Majority of these slaughterhouse are capable of processing residues derived animals in the range of 10~60 ton/day, which is quite small in terms of processing capacity. The problem encountered in the recycling of the residues derived animals is the occurrence of foul smell caused by the decomposition, for which appropriate measures have to be taken. The residues derived animals are on many occasions directly collected and transported to save costs and secure required amount of residues derived animals.

• Resources Recycling
• /
• v.24 no.5
• /
• pp.40-55
• /
• 2015

The purpose of this study is to analyse whether the waste disposal volume level in the construction waste disposal industry makes a different effect on earnings management behaviour by size of the licensed storage capacity and by location of the waste disposal site. The empirical results of this study are as follows. First, the waste disposal volume significantly influences earnings management behavior. When it comes to the size of licensed storage capacity in the small-sized capacity firms, the smaller waste disposal volume firms make more aggressive earnings management by using discretionary accruals. On the other hand, in the large-sized capacity firms, more waste disposal volume firms report higher earnings by adjusting more discretionary accruals. Second, the effects of waste disposal volume on the earnings management show different pattern depending on the location of waste disposal site. When the firms are located in the non-capital regions, the smaller waste disposal volume firms report higher earnings by adjusting discretionary accruals as well as by using real activities earnings management. However, the firms located in the capital regions show more aggressive earnings management when they have higher waste disposal volume level.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.50-57
• /
• 2006

Production of activated carbon from woody fish parking cases has been studied using waste sulfuric acid as an activating agent for the purpose or promoted recycling of woody fishing port wastes. The adsorption capacity of produced activated carbon was observed to increase with activation temperature and reached its maximum at ca. $650^{\circ}C$ under the experimental conditions. However, the adsorption capacity of activated carbon became deteriorated above this temperature due to the thermal degeneration of its structure. Optimal activation time was found to be about 120 minutes and 1:3 weight ratio of raw material and activating agent was appropriate for increased adsorption capacity of activated carbon under the conditions of $550^{\circ}C$ and 60 minutes of activation time. Regarding the effect of the concentration of activating agent on activation, ca. 1.2 M of sulfuric acid was observed to be proper for an optimal activation or raw material. Comparison of the activation power of sulfuric acid with nitric acid showed that sulfuric acid was superior to nitric acid, however, with regard to the yield of activated carbon there was no significant difference between the two activating agents. The degree of dispersion of carbon particles was shown to be relatively high in neutral condition and the produced activated carbon was considered to be effectively employed for the treatment of metal ions in wastewater due to its negative surface charge in aqueous condition.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.73-82
• /
• 2016

PURPOSES: The national highways and expressways in Korea constitute a total length of 17,951 km. Of this total length of pavement, the asphalt pavement has significantly deteriorated, having been in service for over 10 years. Currently, hot in-place recycling (HIR) is used as the rehabilitation method for the distressed asphalt pavement. The deteriorated pavement becomes over-heated, however, owing to uncontrolled heating capacity during the pre-heating process of HIR in the field. METHODS: In order to determine the appropriate heating method and capacity of the pre-heater at the HIR process, the heating temperature of asphalt pavement is numerically simulated with the finite element software ABAQUS. Furthermore, the heating transfer effects are simulated in order to determine the inner temperature as a function of the heating system (IR and wire). This temperature is ascertained at $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$, and $800^{\circ}C$ from a slab asphalt specimen prepared in the laboratory. The inner temperature of this specimen is measured at the surface and five different depths (1 cm, 2 cm, 3 cm, 4 cm, and 5 cm) by using a data logger. RESULTS: The numerical simulation results of the asphalt pavement heating temperature indicate that this temperature is extremely sensitive to increases in the heating temperature. Moreover, after 10 min of heating, the pavement temperature is 36%~38% and 8%~10% of the target temperature at depths of 25 mm and 50 mm, respectively, from the surface. Therefore, in order to achieve the target temperature at a depth of 50 mm in the slab asphalt specimen, greater heating is required of the IR system compared to that of the gas. CONCLUSIONS : Numerical simulation, via the finite element method, can be readily used to analyze the appropriate heating method and theoretical basis of the HIR method. The IR system would provide the best heating method and capacity of HIR heating processes in the field.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.1
• /
• pp.13-21
• /
• 1999

The purposes of this research were to evaluate the character of laboratory wastewater, and to examine the utilization of waste egg shells for neutralization and removal of heavy metals. Waste egg shells are excellent at neutralizing acidic wastewater, because they have alkaline minerals such as calcium. It must be seemed that removal rate of heavy metals were very influenced by adsobent dosage and adsorbate concentrations, because waste egg shells acted as precipitation and adsorption. If we reflected the adsorption capacity(k) and adsorption(1/n) of Freundlich isotherm, we couldn't consider waste egg shells as a good adsorbent. In view of these results, it showed that wastes containing the similar compositions as waste egg shells could utilize the neutralization, precipitation and adsorption of heavy metals in laboratory wastewater.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.10-19
• /
• 2007

The mechanical process followed by hydrometallurgical treatment has been developed in order to recover cobalt and lithium from spent lithium ion battery. In the previous study, a citrate precursor combustion process to prepare cathodic active materials from the leaching solution was elucidated. Resynthesis of electrode materials should be more valuable in spent battery recycling. Conventional slurry mixing of $LiCoO_2$ and carbon cannot make uniform distribution, and therefore the cathode cannot reach the theoretical charge-discharge capacity and is easily degraded during the charge-discharge cycling. In this study, ultra-fine $LiCoO_2$ powders has been prepared by modification of the combustion process and fabricated the enhanced cathode by modification of mixing method of $LiCoO_2$ and carbon added.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.7
• /
• pp.161-168
• /
• 2009

In this paper, we studied about an consolidated transportation model to transport EOL (end-of-life) electronic household appliances for recycling in South Korea. The objective is to minimize the total traveling distance of the vehicles transporting EOL electronic household appliances collected by local authorities and major manufacturers' distribution centers to assigned R/C(recycling center) in South Korea. Current reverse logistics for recycling EOL electronic household appliances is operated by local authorities and major manufacturers individually, and it is inefficient for the following reasons: excessive traveling distance, transportation cost, low truck capacity utilization, and so on. The presented model is developed to solve this problem. We apply a integer programming to solve this problem and present computational results using actual field data.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.71-76
• /
• 2007

The mixed plastic waste generated from households after hand-picking and/or mechanical sorting processes amounts to 1,750,000 ton in 2006, and most of these waste are finally end up with landfill and/or incineration due to the lacks of separation technologies and economical reasons. The mixed plastic wastes can not be used as raw materials for chemical and/or thermal recycling processes because of their high content of PVC(upto 4.0 wt.%). In the present research, gravity separation system has been developed to remove PVC from the mixed plastic waste and to recover the PO-type plastics. This system mainly consists of air classification, magnetic separation, one-step crushing, feeding system at fixed rate and wet-type gravity separation system. The gravity system based on centrifugal separation has been developed at capacity of 0.5 ton/h and it consists of mixing, precleaning, separation, dewatering, recovery system and wastewater treatment system, etc. The main objective of this process is to achieve high separation efficiency of polyolefins with less than 0.3 wt.% PVC content and less than 10% moisture content in the final products. In addition, a crushing unit of with 8 rotor system is also developed to improve the crushing efficiency of soft-type plastics. The system with a capacity of 1.0 ton/h is developed and operational results are presented.