• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.22-34
• /
• 2003

Processing and smelting of copper containing sulphide concentrates result in the accumulation of impurities into various process streams. All primary copper smelters and refineries around the world produce significant amounts of slag, dust, sludge, residues and others, which contain copper and precious metals. The recovery of these valuable metals is essential to the overall economics of the smelting process. Physical, chemical and mineralogical characterization of particular slag and Cottrell dusts from primary smelters and Dore furnace (TBRC) slag and Pressure Leached Anode slimes from a copper refinery have been carried out to understand the basic behind the recovery processes. Various process options have been evaluated and adapted for the treatment of slag from different smelting furnaces and Cottrell dusts as well as the intermediate products from copper refineries. Besides the hydro- or pyre-metallurgical treatments, the above mentioned physical separation options such as magnetic, gravity separation, flotation and precipitation flotation processes have been successfully identified and adapted as the possible process options to produce a Cu-rich or precious metal-rich concentrates for in-house recycling and other valued by-product for further treatment. The results of laboratory, pilot plant and production operations are presented, and incorporation of several alternative flowsheet is discussed in this paper.

• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.1
• /
• pp.1-15
• /
• 2024

Occurrence of process environment changes, such as influent load variances and process condition changes, can reduce treatment efficiency, increasing effluent water quality. In order to prevent exceeding effluent standards, it is necessary to manage effluent water quality based on process operation data including influent and process condition before exceeding occur. Accordingly, the development of the effluent water quality prediction system and the application of technology to wastewater treatment processes are getting attention. Therefore, in this study, through the multi-channel measuring instruments in the bio-reactor and smart multi-item water quality sensors (location in bio-reactor influent/effluent) were installed in The Seonam water recycling center #2 treatment plant series 3, it was collected water quality data centering around COD, T-N. Using the collected data, the artificial intelligence-based effluent quality prediction model was developed, and relative errors were compared with effluent TMS measurement data. Through relative error comparison, the applicability of the artificial intelligence-based effluent water quality prediction model in wastewater treatment process was reviewed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.381-382
• /
• 2009

This research presents early characters of waste recycling shotcerete with a combination of Coal-Ash are used by Bo-Ryung thermoelectric power plant. Several tests were conducted in this research.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.124-128
• /
• 2006

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.5-13
• /
• 2017

Polypropylene is the main existing material in the domestic market being used for the filter plate because of its moldability, low cost, and commercial availability. Polypropylene filter plate once distorted due to the high-pressure during operation may cause the problem in the continuous operation of the solid-liquid separation module. Thermoplastic Poly Urethane (TPU) can be a high-performance alternative material for the filter plate in the solid-liquid separation module of the dehydration process. Hence, to predict and evaluate the TPU for structural stability in the filter plate through analytical techniques designed and experimental verification is essential. As a result, TPU filter plate had maximum strain of 27.85 MPa at 20 bar pressure condition. This result is less than TPU stress-strain limit, which ensures the structural stability of the TPU material.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.103-108
• /
• 2000

As it is forbidden to landfill the organic sludge generated in water treatment plant from 2001, disposal coast of the sludge will be highly incersed. Therefore, This Study was conducted to recyle the sludge of water supply plant as inorganic fertilizer for agricultural areas and forests using the Chemical and the Hydrothermal methods. As the result, we could manufacture sutiable inorganic fertilizer, removing organics and harmful heavy metals by the Chemical and the Hydrothermal method.

• Resources Recycling
• /
• v.23 no.3
• /
• pp.3-12
• /
• 2014

This study aims at providing an economic assessment for incineration plants which recover heat during its incineration process. In this study, Life Cycle Cost(LCC) of incineration plants is performed based on each regression analysis formula for construction cost, operation cost, and heat generation in order to compare economic feasibility. The result shows that the incineration plant recovering waste heat while processing 80 tons of waste per day increases both initial investment and operation cost but this type of an incineration plant has economical predominance from the recovered waste heat over the one that does not recover heat when being operated for more than eleven years if the retrieved heat replaces the use of LNG. And its payback time reaches more than 19 years in case of selling heat and performing emission trading.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.92-99
• /
• 2002

The study was conducted to investigate the changes of soil properties and evaluation of plant utilization according to the application of compost used with phyllite. At this experiment, the plant cultivation test(lettuce and radish plant) was carried out to know about physico-chemical properties of compost, humus degradarion and stabilization degree, and some effects among rhe treatments were best at 20Mg/ha in PSPC 10(Phyllite, Saw dust, Pig manure Compost) plots and ar 10Mg/ha in PSPC 20 treatments, respectively. The EC value was high in the compost. Therefore the EC was appeared more than 2ds/m at the applied 40Mg/ha with compost. And in case of lettuce, Avail.-$P_2O_5$ and EC were more increased than in the radish plots, highly. In contrast, in case of radish, Toral-N, Total-C, and EC contents were decreased after plant cultivation. That is, it could know that radish was fond of absorprion of nitrogen. Also, BD values of soil physical properties were decreased according to increasing of phyllite addition ratio, however water holding capacity(WHC) was increased. The plant test had not been darnaged through the application of compost used with phyllite in soil and there had not been worse on changing of soil physico-chemical properties. Consequently, phyllite composts have been thought on agricultural utilized possibility.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.1037-1040
• /
• 2019

For the past 50 years, graphite has been widely used as a moderator, reflector and fuel matrix in different kinds of gas-cooled reactors. Resulting in approximately 250,000 metric tons of irradiated graphite waste. One of the most significant long-lived radioisotope from graphite reactors is carbon-14 ($^{14}C$) with a half-life of 5730 years, this makes it a huge concern for deep geologic disposal of nuclear graphite (NG). Considering the lifecycle of NG a number of waste management options have been developed, mainly focused on the achievement the radiological requirements for disposal. The existing approaches for recycling depend on the cost to be economically viable. In this new study, an affordable process to remove $^{14}C$ has been proposed using samples taken from the Nuclear Power Plant in Latina (Italy) which have been used to investigate the capability of organic and inorganic solvents in removing $^{14}C$ from exfoliated nuclear graphite, with the aim to design a practicable approach to obtain graphite for recycling or/and safety disposed as L& LLW.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.