• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.7
• /
• pp.1162-1169
• /
• 1999

Modern livestock production facilities face both challenges and opportunities with respect to sustainable manure management practices. Nutrient recycling is constrained by the size of modern livestock operations, the low nutrient density of liquid manures, and the spatial and temporal variability of manure nutrient concentrations. These constraints can and must be addressed or farmers will be increasingly drawn to nutrient wasting strategies such as anaerobic lagoons, wetlands, and other systems designed to treat and discharge nutrients to the environment. Intentional discharge of nutrients is difficult to justify in a sustainable agricultural production system, since replacing those nutrients through chemical fertilization requires considerable expenditure of energy. In contrast, there are several currently viable technologies which provide the homogenization and stabilization needed to successfully compete against chemical fertilizers, including composting, pelletization, and anaerobic digestion. Some of these technologies, particularly anaerobic digestion and composting, also open up increased opportunities to market the energy and nutrients in manure to non-agricultural uses. Future advances in biotechnology are likely to demonstrate additional options to transform manure into fuels, chemicals, and other non-agricultural products.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.60-68
• /
• 2000

Biofiltration is an environmentally-sound technology for elimination of VOCs and odorous compound from low-concentration, high-volume waste gas streams because of its simplicity and cost-effectiveness. It can be appled to the treatment of gases from publicly owned treatment works, composting facilities, landfill sites, and soil vapor extraction systems. The ability to design an effective biofilter system involves a combination of fundamental biofilter knowledge, practical experience, and bench- and pilot-scale testing. The objective of this paper was to review principle, design parameters, operational conditions, case studies, and economy of biofiltration through literature.

• Journal of Aquaculture
• /
• v.6 no.4
• /
• pp.311-321
• /
• 1993

Ammonia accumulation is regarded as the limiting factor of the first priority in water qualities of aquatic culture systems. Nitrification efficiency and characteristics in seawater were evaluated using Rotating Biological Contactor (RBC) process as a part of the recycling water treatment facilities for marine fish culture system. Ammonia removal efficiency regarded 99.7 to $83.7\%$ at the ammonia surface loading rates of 48 to $393 mg/m^2$ -day. RBC process was able to withstand to the fluctuation of influent ammonia concentrations and loading and produced the stable effluent. The mathematical model on the fixed-film biological reactor developed by Kornegay seemed to be suitable to RBC process kinetic evaluation for the recycling water treatment of the marine fish culture system. Area capacity constant (P) and half-velocity constant (Ks) in the model were 0.188g/m^2$-day and 1.25mg/l, respectively.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.56-62
• /
• 2000

This study was introduced an amalgamated septic tank system using mineral sintered body was made from non-metallic minerals with a ability being attached or accelerating a vitality of soil microorganism for the effective wastewater treatment. Experimentally, we made an amalgamated septic tank appling anaerobic-aerobic process experimental facilities to two personal houses for handling a residental sewage directly on a small scale from the place of origin. The results are shown as follows; The COD\ulcorner and BOD of effluent were about 10 mg/l after the treatments and T-N removal efficiency was 60-70%. Moreover these results suggested the possibility of denitrification without adding organics and more than 80% of T-P removal also showed the possibility of wastewater treatment biologically.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.62-69
• /
• 2020

Manufacturing processes in industrial complexes produce NOx, SOx, VOCs, which cause particulate matter (PM). Therefore, this study analyzed the characteristics of each industrial complex by using scattered public data, matched the existing particulate matter(PM) reduction technology, and proposed an optimized reduction plan. The application of matching technologies and facilities by industrial complexes based on data is able to mitigate NOx, SOx, and VOCs which cause particulate matter in the process in advance. This way can be an effective alternative in order to reduce PM in the manufacturing processes as well as industrial complexes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.1
• /
• pp.5-17
• /
• 2021

This study is a literature review on the recovering phosphorus from Incinerated Sewage Sludge Ash(ISSA), which has relatively high content of phosphorus. Experimental conditions and influencing factors related to the recovery of P and removal of heavy metals by wet and thermochemical methods were discussed. For the practical application of the recovery of P from ISSA, an integrated process linked to incineration facilities is required in terms of economy from the perspective of the entire system including disposal of wastewater and residues generated during the recovery process, and minimizing added chemicals and energy consumption.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.89-98
• /
• 2001

Present vermicomposting technology needs the broad land. Because of the high land cost, the land saving technology such as multistage must be needed. And present operation practices are mostly based on human power, mechanization and automation is needed. Also, present control practices based on individual experience need the scientific base control system. Even though the rough estimation of organic waste treatment showed that vermicompostiong could obtain more benefits than costs. But, the estimation is based on an ideal case without considering the technical and market. Generally, vermicomposting is considered as the more expensive technology than composting. Therefore, the practical proof the economic factor would be the most important to the market increase. Vermicomposting as the recycling technology has better condition than incineration and landfill. Propagation and advocating focused on its environmentally sound aspects would be needed continuously. Especially, demonstration and distribution of household vermicomposting would be a good approach. Vermicomposting facilities area was becoming larger, and earthworm feeding materials were also expanding to various organic sludges. These trends showed that vermicomposting is being enlightened to treat and recycle the organic wastes.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.177-181
• /
• 2015

Food waste has been widely considered as a recycling resource to be applied to agricultural lands due to the effects of organic matter and nutrient for plant productivity. but the maturity and salt concentration in the compost produced from food waste processing facilities should be considered firstly, which was little information on compost quality produced from food waste treatment facility. In this study, we examined actual situation of food waste processing facility on the composting of food waste and evaluated the characteristics of composts produced from food waste processing facilities. The quality of composts was analyzed on the basis of the criteria of fertilizer processing manual. The 46% of food waste treatment facility registered composting produced actually the compost mixed with food waste or animal waste. The compost maturity and salt concentration as indicators of the quality of compost were not met 46.8% of composts collected from food waste processing facilities to the criteria of fertilizer processing manual. Also, 15.6%(moisture) were not satisfied with the criteria. In conclusion, the compost produced from food waste processing facilities is firstly required with better compost maturity and reduced salt concentration in order to use to agricultural lands as an amendment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.85-100
• /
• 2023

In this study, in order to improve the installation periodical inspection method of waste treatment facilities, we conducted on-site surveys of waste treatment facilities classified into six fields, grasped the problems of inspection methods, and made improvements accordingly. And revised the inspection method for waste treatment facilities. As a result, in the field of incineration and incineration heat recovery, inspection methods such as total temperature measurement and one-year TMS data comparison using a thermal imaging camera were established. And for the safety of the inspected person, it was applied so that the waste can be replaced with a document without opening it. In the case of landfill facilities, the details regarding the use of video information processing equipment and the management of facilities covering the upper part of the landfill facility are presented in the law, but the items that do not have a inspection methods were applied to the inspection method. In the case of Food Waste Treatment Facility, inspection methods were put in place to ensure compliance with standards for foul-smelling fish in odor control, a major cause of complaints. As a result, 10 out of 18 improvement proposals were reflected in the incineration and sterilization grinding, cement kiln, and incineration heat recovery facilities, and 11 out of 12 improvement proposals were reflected in the landfill facility. In the case of food distribution waste treatment facilities, 10 out of 12 improvement proposals were reflected, and a total of 31 inspection methods were improved.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.26-36
• /
• 2014

The materials flow of copper can be analyzed into up-stream and down-stream stages based on the literature survey. Discharge and recycling stages in the down-stream have been particularly analyzed through the field survey. The waste nickel resources circulation flow may conveniently be grouped into 4 stages discharge import, collection disuse, resource recovery and product production export, the resources mainly consist of copper scrap and stainless steel scrap in 2010. The resource circulation rate of 36.83% is obtained from the above flow. Various plans are therefore, suggested in each stage to increase resource circulation rate. At discharge import stage, it is suggested to consider this kind of waste as an important resources if it is appropriately classified in detail, basides applying quota tariff to this kind of waste. At collection disuse stage, the plan of stabilizing supply and demand is suggested through the improvement of bidding system. Resources professional cycling stage crushing and grinding companies foster coexistence between large and small plans and strategies were suggested. At product production export stage, the integrated approval is suggested approval for licensing to register units as waste-treating facilities instead of exempting registration under the present condition to activate recycling industries.