• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.175-180
• /
• 2016

Waste bumpers from out-of-service vehicles are recycled in the manufacturing process of plastic parts by incorporating pristine materials after removing the coated paint on a bumper. This study examined the chemical properties and mechanical properties of a mixture of recycled bumper and pristine materials as a function of the mixing ratio. When the pristine materials and the recycled bumper pieces were mixed, the stiffness (tensile strength and the flexural modulus) was provided by their composition averages. On the other hand, the toughness (Izod impact strength and the elongation-at-break) was lower than their composition averages (i.e., negative deviation). FTIR analysis showed that these results were due to the absence of the compatibility between the pristine materials and recycled bumper pieces. When the recycled bumper pieces were loaded at more than 30 wt. %, the toughness decreased drastically. A previous study showed that a paint removal efficiency up to 80 wt.% was easily attainable. The other 20 wt.% of paint on the bumper is very difficult to remove. Therefore, this study examined the mechanical properties of a mixture of recycled bumper pieces containing the unremoved paint and recycled bumper pieces without paint. When the recycled bumper pieces containing the unremoved paint were incorporated in only small quantities, the mechanical properties were decreased to a great extent. These results show that the paint removal efficiency is very important in the recycled bumper industry.

• International Journal of Highway Engineering
• /
• v.7 no.2 s.24
• /
• pp.13-22
• /
• 2005

Using recycled aggregate from demolished concrete structures provides a peat opportunity fur conserving natural resources. In many parts of world, virgin aggregate deposits have been depleted, and transporting aggregates over long distances can be much more expensive than using a low-cost recycled aggregate. In Korea, about 7-million tons of concrete occurs annually, out of this, about 2-3 million tons are available for recycling. This study is to present the method of utilizing the recycled aggregate. The recycled aggregate concretes were made for compressive strength test, flexural strength test and fatigue test using w/c of 40, 50 and 60%. The replacing rates of recycled aggregate to virgin aggregate were 0, 25 and 50%. The purpose of this study is to compare the fatigue lift of recycled aggregate concrete with that of virgin aggregate concrete. It was shown that the fatigue life of recycled concrete was function of recycled aggregate replacement ratio and water cement ratio.

• Industrial Engineering and Management Systems
• /
• v.16 no.1
• /
• pp.22-43
• /
• 2017

It is urgently-needed to construct a green supply chain (GSC) from collection of used products through recycling of them to sales of products using the recycled parts. Besides, it is necessary to consider the uncertainty in product demand as a risk in a GSC. This study proposes the optimal operations for a GSC with a retailer and a manufacturer. A retailer pays an incentive for collection of used products from customers and sells a single type of products in a market. A manufacturer produces the products ordered by the retailer, using recyclable parts with acceptable quality and compensates the collection cost of used products as to the recycled parts. This paper discusses the following risk attitudes: risk-neutral attitude, risk-averse attitude, and risk-prone attitude. Using mean-variance analysis, the optimal decisions for product order quantity, collection incentive, and lower limit of quality level, in the decentralized GSC (DGSC) and the integrated GSC (IGSC) are made. DGSC optimizes the utility function of each member. IGSC does that of the whole system. The analysis numerically investigates how (i) risk attitude and (ii) quality of recyclable parts affect the optimal operations. Supply chain coordination between GSC members to shift IGSC from DGSC is discussed.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.2 s.24
• /
• pp.93-98
• /
• 2007

Waste of Plastic that is waste tile and waste interlocking block result, waste tile and waste interlocking block that execute an experiment to foretell practical use possibility availability as recycled aggregate for concrete giving change in the principal parts rate for coarse aggregate recycled aggregate appeared in the world by available thing to coarse aggregate to rate 10% but necessity that present amount used establishing material application standard that is crushed than uniform application standard to receive entropy of re-fresh concrete quality is judged to be.

• Design & Manufacturing
• /
• v.1 no.1
• /
• pp.39-44
• /
• 2007

In recent, recycling of plastic material has became a major issue due to the landfills and environmental problem. This study investigated fluidity and hardness of thermoplastic vulcanizate(TPV), which is used for automobile component parts such as weather strip in order to replace ethylene propylene rubber (EPDM). So, using the spiral flow test mold, we conducted an experiment on fluidity and hardness of TPV according to injection molding conditions. As results of injection molding experiment, the recycled TPV's flow length was a little bit longer than virgin TPV and the hardness was decreased in case of using the recycled resin. Also, we investigated the morphology study by SEM photo.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.271-275
• /
• 2007

These days, recycling of plastic material has become a major issue due to the landfills and environmental problem. This study investigates the fluidity of thermoplastic vulcanizate(TPV), which can be used for an automobile part such as a weather strip, in order to replace ethylene propylene rubber(EPDM). Injection molding experiments with the spiral flow test mold and panel cover mold are conducted to examine the fluidity of TPV during injection molding. It is found out that the recycled TPV's flow length is a little bit longer than the virgin TPV. However, the filling weight for a panel cover parts by a recycled TPV is almost the same as that by a virgin TPV.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.563-568
• /
• 2003

Recently, the recycled amount of electric, mechanical parts, and appliances in artifacts has increased. These products use valuable rare metals such as platinum group metals and gold, which are included occasionally as additives. Rare metals are maldistributed in the world and most of them are produced in small quantities. A small amount of rare metals used in the appliances causes a large loss of rare metal resources because of the lack of an economically recycling method. The present recycling technologies including physical and chemical separation methods that are considered for recycling of electric, mechanical parts and appliances.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.179-182
• /
• 2007

In recent, recycling of plastic material has became a major issue due to the landfills and environmental problem. This study investigated fluidity of thermoplastic vulcanizate(TPV), which is for automobile component parts such as weather strip in order to replace ethylene propylene rubber (EPDM). So, using the spiral flow test mold and panel cover mold, we conducted an experiment on fluidity of TPV with injection molding. As results of injection molding experiment, the recycled TPV's flow length was a little bit longer than virgin TPV and a case of panel cover, the filled weight was almost same quantity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.793-797
• /
• 2005

This study was undertaken to examine the feasibility of recycling waste concrete fine aggregate to prepare polymer-modified mortars. The specimens of polymer-modified mortars were prepared by using styrene-butadiene rubber(SBR) latex and polyacrylic ester(PAE) emulsion as a polymer modifier. The formulations for specimens were prepared with various replacing ratios of waste concrete fine aggregates as parts of standard sand and various polymer cement ratios. For the evaluation of the performance of polymer-modified mortars, various physical properties were investigated. As a results, water cement ratio of polymer-modified fresh mortars increased with an increase of recycled fine aggregate, but decreased with an increase of polymer modifiers. The compressive and flexural strengths of polymer-modified mortars decreased with an increase of recycled fine aggregate, but flexural strengths increased with an increase of polymer modifiers.

• Industrial Engineering and Management Systems
• /
• v.14 no.3
• /
• pp.248-274
• /
• 2015

This study discusses a contract to promote collection and recycling of used products in a green supply chain (GSC). A collection incentive contract is combined with a reward-penalty contract. The collection incentive contract for used products is made between a retailer and a manufacturer. The reward-penalty contract for recycling used products is made between a manufacturer and an external institution. A retailer pays an incentive for collecting used products from customers and delivers them to a manufacturer with a product order quantity under uncertainty in product demand. A manufacturer remanufactures products using recyclable parts with acceptable quality levels and covers a part of the retailer's incentive from the recycled parts by sharing the reward from an external institution. Product demand information is assumed as (i) the distribution is known (ii) mean and variance are known. Besides, the optimal decisions for product quantity, collection incentive of used products and lower limit of quality level for recyclable parts under decentralized integrated GSCs. The analysis numerically investigates how (1) contract for recycling activity, (ii) product demand information and (iii) quality of recyclable parts affect the optimal operation for each GSC. Supply chain coordination to shift IGSC is discussed by adopting Nash Bargaining solution.