• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.51-58
• /
• 2008

This paper presents the effect of acid treatment on the removal of metals and the brightness of pulp. The bleached kraft pulps, metal-absorbed pulps and recycled pulps((ONP, OCC, MOW, and SC) were treated with the acidic solutions. Among metals in the bleached kraft pulps, Cu, Ca and Mg were removed easily by the acid washing, whereas Fe, Al and Si were not removed. The acid washing also removed distinctly metals from the metal-absorbed pulps. The metals absorbed in pulps reduced the brightness (%, ISO). Especially, Fe was the most detrimental metal. However, the brightness which was decreased by metals was restored to the status quo by the acid washing. The level of metals in recycled pulps was gradually reduced after the first flotation and acid treatment. Hence, the degree of metal removal by the acid washing was mainly dependent upon the kinds of waste pulps and metal ions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.82-90
• /
• 2009

It is very important to utilize effectively fibrous waste paper in terms of cost savings, environmental effects, and governmental policies. The quality of final products and runnability of papermaking process are primarily affected by constitutions of fibrous raw materials. In specific, board grade paper depends directly on compositions of waste paper bales. At present, the raw materials of board grade paper are mainly derived from lots kinds of wastepaper. Some papermaking countries, like EU, USA and Japan have advanced classification and management systems of recycled fiber, but Korea has not yet organized systematically. In this study, evaluation of wastepaper bale compositions and their fiber properties were carried out for effective utilization of fibrous raw materials for board grade paper production. 3 kinds of wastepaper bales were classified to fibrous or non-fibrous materials. In case of fibrous materials, KOCC, kraft sack paper and white duplex board matters were main component in total weight basis, and in case of non-fibrous materials, vinyl, plastic and cloth matters were main component, in turns. 3 representative kinds of waste paper were disintegrated and classified, and then prepared to handsheet for evaluation of recycled fiber property. Consequently, fines and ash content of waste paper, isolated from KOCC and white duplex board were higher than that of kraft sack paper. pH values of all kinds of waste fibers were neutral or weak alkaline.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.5
• /
• pp.1-11
• /
• 2001

In the past, abundant and clean water was available for paper mills'use. However, the growth of population and industry made water less available nowadays. Also, environmental regulation limits wastewater discharge, which affects mill operation cost. Therefore, paper mills are under pressure to use more recycled water and mill system closure. As a result, chemical and physical parameters of water are changing and new environment if being created for microorganisms in paper mill system as well. The more soluble or suspended organic materials are increased as more water is recycled and less or scarce dissolved oxygen is available, depending on the degree of recycled water usage. Microorganism flora ill paper mill system will be a1so shifted according to the environmental change of mill system. Anaerobic bacteria, including sulfate reducing bacteria (SRB), will be dominant in the system as very low or almost no oxygen available in the system. Nevertheless, it is common in domestic paper mills that employ the same and old biocides as a means of microbial control, and microbiological control is often less recognized or even neglected. The right biocide selection for increased reductive environment of mills is critical for operation and estimated loss from paper quality defects such as sheet break, holes due to microbiological cause is tremendous compared to the microbiological control cost. It is imperative to investigate and diagnosis the environmental change of mills for right control of cumbersome microorganisms. Several useful diagnosis tools, including new technology employing OFM(Optical Fouling Monitor) in situ, are illustrated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.87-94
• /
• 2007

Reuse of recycled aggregate from demolished concrete structure is beneficial and necessary from the viewpoint of environmental preservation and effective utilization of resources. The most important mechanical properties of recycled aggregate concrete (RAC) are the compressive strength, the tensile and the flexural strengths, the bond strength and the elastic modulus of such concrete. In particular, the stress-strain relation and fracture process of RAC in compression is especially important in theoretical and numerical analysis as well as engineering design of RAC structures. In this paper, to clarify the characteristics of fracture process in RAC, acoustic emission(AE) method is applied to detect micro-cracking in concrete under compression. From AE parameters, it is found that cracking and fracture behaviors in recycled aggregate concrete fairly differ from that of normal and recycled sand concrete.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.20-27
• /
• 2007

This paper presents a detailed experimental study on the durability properties of mortar matrix made with two kind of recycled fine aggregates(RAA, RAB) and five replacement levels (0, 25, 40, 75 and 100) of the recycled fine aggregates as a partial replacement of natural fine aggregate (NA). The durability properties of mortar matrix was evaluated using compressive strength, chloride ion ingress, sulfate attack and carbonation. The test results indicated that the water absorption and Adhered mortar of the recycled fine aggregate was a major factor controlling durability properties. Hereafter, when using built recycled fine aggregate is expected, appropriate removal Adhered mortar and reasonable replacement ratio of recycled fine aggregates was 25% weight of cement are advised to apply to the concrete materials.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.16-23
• /
• 2002

In construction field, million tons of demolished concrete are produced in korea. It is urgently needed that they are used as recycled materials in order to prevent environment pollution and gain economic profits. However, existing recycling methods of demolished concrete have their limits for wide application. They have been only focused on the burying and banking. Therefore, in this paper, physical and mechanical properties of planting concrete using construction wastes for aggregates are described in order to investigate the validities of demolished concrete as recycled aggregates. The Properties of strength and durability are tested. According to the experimental results, compressive strength and freeze-thaw resistance of planting concrete using recycled aggregates shows worse performance than those using crushed stone concrete. But, it shows positive performance on the absorption ratio and thermal conductivity. Especially, considering the side of recycling of concrete wastes, it is recommended that recycled aggregates made with construction wastes is applied to planting concrete.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.150-156
• /
• 2001

To explore the feasibility of recycled paper mulching in spring-grown potato the changes of soil environments and the growth and yield of potato under non-mulched control and three mulching treatments of recycled paper (RPM), transparent polyethylene film (TPFM), and black polyethylene film (BPFM) were examined over two spring seasons in 1998 and 1999 at Suwon, Korea. The mulching materials were a recycled mulch paper with 110 g/$m^2$ and a thickness of 0.1mm, which was manufactured from old corrugated containers for this experiment and the commercial polyethylene films with a thickness of 0.01mm. RPM lowered the average soil temperature at 5-cm depth during the potato growing period by 03$^{\circ}C$ compared with the control, whereas TPFM and BPFM raised it by 2.$0^{\circ}C$, and 1.8$^{\circ}C$, respectively. On a sunny day during sprout emergence, RPM reduced the maximum soil temperature by about 5$^{\circ}C$, while TPFM and BPFM enhanced it by about 11$^{\circ}C$ and 6.$0^{\circ}C$, respectively. The temperature difference between the control and the mulching treatments decreased with the development of canopy. All the mulching treatments had an advantage in preserving the soil moisture over the control. RPM and BPFM resulted in the effective control of weed by obstructing light transmission onto soil surface, but TPFM had no control effect of weed. Sprout emergence started two to three days earlier in TPFM and BPFM, but one day later in RPM than in the control due to the altered soil temperature by the mulching treatments. However, the final percentage of emergence was notably lower in TPFM than that in the control because of too high soil temperature during daytime, but was not different among the control, RPM, and BPFM. During the early stage of potato growth, the shoot and root growth under RPM was lower compared with the control, but afterwards, RPM outpaced the control. In 1998 experiment, the tuber yield under RPM and BPFM were significantly higher than those of the control and TPFM. In 1999 experiment, there was no significant difference in tuber yield between RPM and the control.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.149-157
• /
• 2017

As the amount of construction wastes increase, reuse of recycled materials is being considered in research areas. While there are many experimental investigations focusing on development of mortar and concrete using the recycled materials, the studies regarding the fiber-reinforced cement composites (FRCCs) using recycled materials are still limited. In this paper, an experimental attempt has been made to investigate the effect of recycled fine aggregates and fly ash on the mechanical properties of PVA FRCCs. The cement and natural sand were respectively replaced by fly ash and recycled fine aggregates at two content levels, 25% and 50%. Ten types of PVA FRCCs mixes were fabricated and tested to investigate the flexural, compressive and direct tensile behaviors. The test results show that flexural, compressive and direct tensile strength were decreased with increase in fly ash content at all ages. In particular, flexural, compressive and direct tensile strengths of specimens, containing 50% recycled fine aggregates and 50% fly ash, showed the lowest values. The modulus of elasticity of specimens showed similar trend to the 28-day compressive strength. Poisson's ratio was increased with increase in fly ash and recycled fine aggregates content.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.499-504
• /
• 2005

Polymer concrete shows excellent mechanical properties and chemical resistance compared with conventional normal cement concrete. The polymer concrete Is drawing a strong interest as high-performance materials in the construction industry Resins using recycled PET offer the possibility of a lower source cost of materials for making useful polymer concrete products. Also the recycling of PET in polymer concrete would help solve some of the solid waste problems Posed by plastics and save energy. An objective of this paper is to estimate the damage of sulfuric acid, through investigating recycled PET polymer concrete, immersed at sulfuric acid solution for 84 days. As a result of testing, recycled PET PC, used $CaCO_3$ as filler, makes a problem of appearance and strength if they are exposed for long term at corrosion environment. On the other hand, recycled PET PC, used fly-ash as filler, had less effect on decrease in weight and strength. Recycled PET PC is excellent chemical resistance, resulting in the role of unsaturated polyester resin which consists of polymer chain structure accomplishes bond of aggregates and filler strongly. Also, recycled PET PC, used fly-ash as filler, is stronger resistance of sulfuric acid corrosion than $CaCO_3$, because it is composed of $SiO_2$ and very strong glassy crystal structure. Therefore, recycled PET PC, used fly-ash as filler, is available under corrosion circumstances like sewer pipe or waste disposal plant.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.16-23
• /
• 2004

Recently the increased concerns about the cost reduction and environmental protection make the paper industry increase the closure level of papermaking system, which results in the buildup of organic and inorganic materials in the papermaking process water. Increase of the system closure causes deterioration of additive performance and provokes diverse problems in papermaking process and product quality. To investigate the effects of process water quality on the physical properties of fine papers handsheets were prepared with process water containing various amounts of inorganic and organic contaminants including calcium or sodium ions and oxidized or cationic starches. Inorgainc and organic materials did not show any significant effect on the physical properties of handsheets. Recycled GCC showed the same trends as inorganic and organic materials. The performance of cationic starch was deteriorated, however, in the recycled white water, which resulted in the reduction of tensile index of handsheets.