• 한국지반환경공학회 논문집
• /
• 제12권9호
• /
• pp.21-25
• /
• 2011

본 연구는 낙동강 준설사업 중 발견된 폐기물의 종류, 매립량, 지정폐기물 여부 및 안정화 상태를 파악하기 위하여 수행되었다. 발견된 폐기물의 정확한 분류는 향후 폐기물의 적정처리를 위해 필수적인 과정이다. 낙동강 중류지역 고수부지 내 굴착조사지점 159개 중 27곳에서 폐기물이 발견되었으며, 분석결과 이들 폐기물은 지정폐기물로 분류되지 않았다. 또한 60곳에서 점질토가 출토되었는데, 이들은 폐기물로 분류되지 않았고 일반토양과 같이 현장에서 재활용이 가능할 것으로 판단되었다. 일부 시료의 경우, 안정화되지 않고 유기물 분해가 일어나는 것으로 판명되었다.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• 건축역사연구
• /
• 제29권6호
• /
• pp.101-112
• /
• 2020

This study focuses on the construction of Gyeongbokgung Palace in the second year of King Gojong's reign, which has been spotlighted for political and economic history. The author analyzed the contents of wood procurement with the Yeonggeon Diary, which records each day of construction site. The results are as follows: First, the 2nd year of King Gojong's reign, Yeonggeon of Gyeongbokgung Palace, was a new building that reflected the old system and 270 years of changed environment on the existing site. Despite the poor economic conditions, it began with years of effort and voluntary volunteer work and dedication. Second, the priority of timber transport was recruiting people in the whole process and the supply and demand of transportation tools. Carrying lumber from the mountains to the riverside and floating it at the right time were all a matter of manpower. Soldiers and carts were used to carry timber that arrived in Hangang River to the construction site. The cart was a consumable product, so it was necessary to continuously use the wood to make cart at the site. Third, fire and flood were the biggest obstacles to the Yeonggeon schedule of Gyeongbokgung Palace. Especially the fire was fatal. It was difficult to extinguish the fire in temporary structure, where was the storage for wood to construct. These disasters greatly affected the construction cost and construction period. Wood procurements of Gyeongbokgung Palace were based on public offerings. At the same time, recycled materials from other palace wood and nearby houses, nationwide buying of private mountain wood, the logging of royal tombs and some of the buildings of Gyeonghui Palace and Changgyeong Palace were relocated.

• 한국주조공학회지
• /
• 제41권2호
• /
• pp.139-143
• /
• 2021

타이타늄 합금 중 페로-타이타늄은 철강 업계에서 철강과 스테인리스강을 생산하는데 사용되는 주요 첨가물이다. 본 연구에서는 고품질의 페로-타이타늄 합금을 주조하기 위해 경제적인 면을 고려한 저비용 타이타늄 스크랩을 활용하고자 하였다. 먼저 재활용 타이타늄 스크랩의 표면에 형성되어 있는 절삭유 및 불순물을 제거하기 위한 최적의 전처리 공정을 연구하였다. 일반적인 세척 방법인 산이나 유기용제는 세척이 용이하나 환경적으로 문제가 되므로 친환경적인 방법을 고안하여 적용하고자 하였다. 또한, 타이타늄 스크랩을 활용하여 고품질의 페로-타이타늄 잉곳을 제조하고 성분 분석을 통해 불순물과 특성을 상용 소재 규격과 비교 분석하였다.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.457-462
• /
• 2022

본 연구는 순환자원을 대량 활용한 지반안정재를 활용하여, 비교적 작은 하중이 작용하는 중·저층 건축물의 얕은 기초 보강공법에 적용한 사례에 대한 내용으로 우선하여 현장 최적배합비를 도출하고자 4가지 혼합비에 대한 실내배합시험을 실시하였으며, 도출된 최적배합비를 이용하여 현장에서 건축물 얕은기초로 적용하였다. 현장 적용방법은 원지반와 지반안정재를 교반한 혼합토를 현장에서 혼합하여 다짐을 실시하는 매우 단순한 공정을 이용하였다. 현장 적용 후 평판재하시험을 원지반 1곳, 개량지반 2곳에 실시하여 허용지지력을 확인하였다. 지지력 확인 결과 충분한 지지력을 발휘하는 것으로 나타나, 해당 건축물의 앝은기초로 활용이 가능한 것으로 확인되었다.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1135-1144
• /
• 2023

In this paper, bending strength and permeability tests were conducted on concrete permeable blocks manufactured by recycling industrial by-products of oyster shell and blast furnace slag to measure and compare bending strength and permeability coefficient, and present experimental research results. To this end, a total of 54 specimens with a size of 200x200x60mm for surface layer and base layer were manufactured, and bending strength and permeability test were carried ourt accoridng to KS F 4419. Eighteen types of mixing designs were implemented by varying the mixing and replacement rates of oyster shells and blast furnace slag. As a result of the experiment, the higher the mixing ratio of oyster shell, the lower the bending strength and the permeability coefficient. Thereafter, a total of three permeable blocks with dimensions of 200x200x60mm were manufactured and subjected to bending strength and permeability tests according to KS F 4419. As a result of the test, the bending strength satisfies the standard of KS F 4419, and the permeability coefficient is 12 times higher than the standard of KS F 4419. It seems that the proper mixing of oyster shells and blast furnace slag increases the amount of air, and further research on durability and economic feasibility of materials used to manufacture permeable blocks is required.

• 한국포장학회지
• /
• 제30권1호
• /
• pp.53-62
• /
• 2024

Molded pulp products has become more attractive than traditional materials such as expanded polystyrene foam (EPS) owing to low-priced recycled paper, environmental benefits such as biodegradability, and low production cost. In this study, various design factors regarding compression and cushioning characteristics of the molded pulp cushion with truncated pyramid-shaped structural units were analyzed using a test specimen with multiple structural units. The adopted structural factors were the geometric shape, wall thickness, and depth of the structural unit. The relative humidity was set at two levels. We derived the cushion curve model of the target molded pulp cushion using the stress-energy methodology. The coefficient of determination was approximately 0.8, which was lower than that for EPS (0.98). The cushioning performance of the molded pulp cushion was affected more by the structural factors of the structural unit than by the material characteristics. Repeated impacts, higher static stress, and drop height decreased the cushioning performance. Its compression behavior was investigated in four stages: elastic, first buckling, sub-buckling, and densification. It had greater rigidity during initial deformation stages; then, during plastic deformation, the rigidity was greatly reduced. The compression behavior was influenced by structural factors such as the geometric shape and depth of the structural unit and environmental conditions, rather than material properties. The biggest difference in the compression and cushioning characteristics of molded pulp cushion compared to EPS is that it is greatly affected by structural factors, and in addition, strength and resilience are expected to decrease due to humidity and repetitive loads, so future research is needed.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권1호
• /
• pp.72-83
• /
• 2024

Most of the slags generated from steel-making industry in Korea are recycled into media-contact aggregates such as fill and cover materials. For their use as media-contact aggregates, the slags must meet not only the waste quality criteria, but also the Daphnia magna acute toxicity test criteria. In this study, Korean Leaching Test ES 06150.e (Korea), Japanese Leaching Test JIS K 0058-1(Japan), Detuch Leaching Test DIN 19529 (Germany), Toxicity Characteristic Leaching Procedure (USA) were conducted for batch leaching test of slags from 6 Korean steel-making companies. In addition, Korean Standard up-flow percolation test (ES 06151.1) mimicking field conditions was conducted to assess the impact of the slag leachate on the surrounding environment indirectly. Heavy metals such as Cr⁶⁺ and Zn²⁺ were detected from both extractant and leachate samples, but all of them did not exceed waste quality criteria of each country. However, Daphnia magna acute toxicity tests using the leachate samples from up-flow percolation test with slag alone and slag/natural soil conditions exceeded ecotoxicity standard (TU=2) due to their high pH (11.3-12.5). After neutralizing the pH of the slag leachate to 6.5~8.5, the Daphnia magna mortality and immobilization were reduced to satisfy ecotoxicity standard. As the reducing pH of slag leachate would be extremely difficult, appropriate recycling management considering the physicochemical characteristics of he slags should be stuided further.

• 한국의류산업학회지
• /
• 제26권1호
• /
• pp.55-64
• /
• 2024

This study investigated the usage and product conditions of clothing companies and online dummy companies for the development of fitting dummy for South Korean women's wear in their 50s and 60s. These women-targeted apparel companies mainly used nude-sized torso type and torso crotch type made of FRP material. The frequency of use of the dummies was high, while the user satisfaction was moderate. Users expressed dissatisfaction with the inaccurate reflection of the body shape according to the KS sizing system and the measurements such as the front and back intercye, upper arms, abdomen, crotch, and waist back length. Upon survey, 73.7% of the respondents answered that development of the dummy and the appropriate age for it is 50 to 54, and they preferred the torso crotch form. In the production of online dummy companies, the torso crotch type and torso type were most widely produced, and polyurethane, FRP, and recycled paper materials were used. The size of dummy was expressed in numerical type, and 6, 7, 8, 9, 10, 12, 14, 16, 18 and 44, 55, 66, 77, 88 were being produced. Even models of the same size had significant deviation, especially in the waist circumference. Also, there was no dummy reflecting 25%~75% center interval to the KS garment sizing standards of women in their 50s and 60s. Therefore, it is desperately necessary to develop a fitting dummy for KS clothing sizing system that reflect their body sizes and shapes.

• 한국가정과교육학회지
• /
• 제15권4호
• /
• pp.115-132
• /
• 2003

본 연구는 제 7차 실과교육과정의 6학년 재활용품 만들기 단원에 창의적 문제해결 수업모형을 적용하여 환경의식 및 창의성을 증진시킬 수 있는가를 실험적으로 검증함으로서 초등 실과 환경 단원의 교수-학습 방법에 관한 기초 자료를 제공하는데 연구의 목적을 두었다. 본 연구는 초등실과환경 단원에 적용한 창의적 문제해결 수업 안의 효과를 알아보기 위하여 실험집단에는 창의적 문제해결 수업안을 적용한 교수-학습 계획안을, 비교집단에는 전통적 수업모형을 적용한 교수-학습 계획안을 적용하였다. 본 연구에서는 창의적 문제해결 수업안을 적용한 실험집단과 전통적 수업모형을 적용한 비교집단간의 환경의식의 차이를 검증하기 위하여 t-검증을 실시하였다. 연구 결과 다음과 같은 결론을 내릴 수 있었다. 첫째, 초등실과 환경단원의 창의적 문제해결 수업모형을 적용한 실과수업을 받은 아동은 환경의식 점수가 의의 있게 향상되어, 창의적 문제해결 수업이 아동의 환경의식 증진에 효과가 있음을 알 수 있다. 이는 환경단원의 창의적 문제 해결 수업이 실천적이고 일상 생활에서 일어나는 생활 습관에 관련된 교육 내용이 많이 포함되어 있어 환경 보존 실행의지가 강화되고, 스스로 찾은 여러 가지 환경 문제를 파악하고 해결하기 위해 다양한 학습을 전개하고 환경관련 주제에 대해 다양한 기능이 배양된 것으로 학생들의 환경의식과 실천태도가 향상되었음을 알 수 있다. 또한 환경문제를 해결하기 위한 재활용 만들기가 우리 생활에 긍정적인 영향을 미치는 것을 눈으로 확인함으로서 환경에 대한 인식이 긍정적으로 형성된 것으로 본다. 둘째, 실과교과에의 창의적 문제해결 수업의 적용은 아동의 창의성 검사결과 유의한 결과가 나타나 창의적 문제해결 수업이 아동의 창의성 향상에 효과가 있음을 알 수 있다. 이는 주변의 환경에 대해 민감한 관심을 보이고 이를 통해 새로운 탐색 영역을 넓히려는 민감성이 생겨났고, 의식적, 무의식적 강박 관념을 없애고 일단 떠오르는 모든 생각들을 수용하고 활용함으로써 특정한 문제 상황에서 가능한 한 많은 양의 아이디어를 산출할 수 있는 능력이 커졌으며, 자신에게 익숙한 관점에만 고착되어 문제를 해결하거나 결론을 내리는 경향에서 벗어나 고정적인 사고의 틀을 깨고 발상 자체를 전환시켜 유연하고 융통성 있게 생각이 변환되어 자기만의 독특한 아이디어를 산출할 수 있는 능력이 형성된 것으로 본다. 이상의 연구 결과를 볼 때, 초등실과환경 단원의 창의적 문제 해결 수업 모형의 적용은 아동의 환경의식과 창의성을 신장시킨다고 할 수 있다.