• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 봄 학술발표회 논문집
• /
• pp.254-259
• /
• 1994

Recycling of waste concrete will contribute not only to the solution of a growing waste disposal problem, also help to conserve natural resources of aggregate and to secure future supply of reasonably priced aggregates for building construction purpose within large urban areas. But there recycled aggregates are more porous and less resistant to mechanical actions. In comparison with natural aggrete concrete, recycled aggregate concrete shows reductions in strength and other engineering properties. And it may also be less durable due to increase in porosity and permeability. Economical ways of improving the quality of recycled aggregate concrete are: (1)by reducing the water-cement ratio; (2)by reducing the water content using a superplasticizer without affecting the workability; (3)addition of pozzolan, such as fly ash; and (4)blending of recycled aggregate with the natural aggretes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.525-528
• /
• 2006

Recently, Korea government prepared Act on facilitation of construction waste recycling in December 2003 for effective recycling of rapidly increasing construction wastes, and has enforced the Act on Jan. 2005. This Act limits the definition of recycled aggregates to the aggregates which obtained quality certificate and for this purpose, government has operated quality standard and certificate system of recycling aggregate. The objective of this experimental study is to evaluate the mechanical properties of recycled coarse aggregate concrete according to curing method by ready-mixed concrete. Compressive strength ratio of recycled aggregate concrete under air-dry curing/wet curing was $74{\sim}91%$. KCI code for conventional concrete overestimated elastic modulus for recycled coarse aggregate concrete.

• 한국건설순환자원학회논문집
• /
• 제12권2호
• /
• pp.178-187
• /
• 2024

본 연구에서 순환 굵은 골재를 콘크리트에 적용하는 데 있어 치환율을 고려할 필요가 있다고 판단되어 기존 연구 동향 및 결과에 대한 자료를 수집하고 순환 굵은 골재 치환율에 따른 콘크리트의 역학적 특성을 분석하였다. 순환 굵은 골재에 대한 자료를 수집하는 데 있어 콘크리트 측정항목 중 압축강도의 있는 것과 및 순환 굵은 골재에 부착된 잔여 모르타르의 제거 등의 공정을 거치지 않은 자료를 수집하였다. 순환 굵은 골재를 50 %와 100 % 치환한 콘크리트의 경우 보통 콘크리트 대비 역학적 특성이 평균적으로 각각 -36.0 ~ 9.9 %와 -40.0 ~ 10.4 % 밑돌거나 상회하는 것을 확인할 수 있었다. 이에 따라 배합 시 흡수율을 고려하여 추가적인 물을 혼입해야 하며, 보통 콘크리트 대비 80 % 이상의 역학적 특성이 나오는 순환 굵은 골재 치환율을 50 % 이하로 하여야 한다고 판단된다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.359-365
• /
• 2017

본 연구에서는 KS F 2573 콘크리트용 순환골재 기준에 적합한 순환잔골재의 치환율에 따른 콘크리트 특성을 검토하였다. 물리적 특성으로 슬럼프, 공기량, 경시변화, 압축강도에 대한 연구를 수행하였으며, 순환잔골재 재활용 활성화를 위한 기초자료를 제공하고자 한다. 슬럼프 경시변화 실험 결과 순환잔골재의 치환율 증가에 따라 슬럼프 경시변화 감소율은 커지는 것으로 나타났다. 공기량 측정 결과 순환잔골재의 치환율 증가에 따라 공기량 또한 증가하는 것으로 나타났으며, 경시변화의 경우 공기량 감소율은 낮아지는 것을 확인하였다. 반면 100% 치환 시 천연골재콘크리트보다 높은 공기량을 나타내 강도저하가 발생할 것으로 사료된다. 압축강도의 실험 결과 순환잔골재 치환율 증가에 따라 강도저감이 발생했으며, 24MPa 배합 결과 30% 치환 시 천연골재콘크리트와 동등한 강도발현을 나타냈다. 위의 결과를 토대로 순환잔골재 30%치환 시 천연골재콘크리트와 동등한 물리적 특성을 나타내 KS F 2573 콘크리트용 순환골재 기준에 적합한 순환잔골재 치환 시 목표강도 24MPa의 30%가 적합한 것으로 판단된다. 추후 순환골재의 사용 활성화를 위해 순환잔골재 개질을 통한 품질개선이 필요하며, 후속연구로서 개질된 순환잔골재를 이용한 순환잔골재콘크리트의 물리적 특성 평가가 수행되어야 할 것으로 판단된다.

• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.101-108
• /
• 2007

Furnace slag powder used currently in Korea needs to add special functions in response to the increase of large-scale projects. In addition, it is advantageous in that it has a lower hydration heat emission rate than ordinary Portland cement and improves properties such as the inhibition of alkali aggregate reaction, watertightness, salt proofness, seawater resistance and chemical resistance. However, furnace slag powder is not self -hardening, and requires activators such as alkali for hydration. Accordingly, if recycled fine aggregate, from which calcium hydroxide is generated, and furnace slag, which requires alkali stimulation, are used together they play mutually complementary roles, so we expect to use the mixture as a resource-recycling construction material. Thus the present study purposed to examine the properties and characteristics of furnace slag powder and recycled aggregate, to manufacture recycled fine aggregate concrete using furnace slag and analyze its performance based on the results of an experiment, to provide materials on concrete using furnace slag as a cement additive and recycled fine aggregate as a substitute of aggregate, and ultimately to provide basic materials on the manufacturing of resource-recycled construction materials using binder and fine aggregate as recycled resources.

• 한국건축시공학회지
• /
• 제19권5호
• /
• pp.383-389
• /
• 2019

콘크리트용 천연골재의 공급이 어려워지고 건설폐기물은 발생량이 지속적으로 증가하고 있는 추세이다. 따라서 건설폐기물을 골재로 만든 순환골재 사용의 필요성이 대두되고 있다. 이에 순환골재를 사용한 콘크리트의 특성에 대한 많은 연구가 진행되고 있으며 최근 연구들을 중심으로 긍정적인 연구결과들이 보고되고 있다. 그 중 순환굵은골재의 부착모르타르의 염화물고정효과에 관한 연구도 보고되고 있다. 그러나 폐기물이라는 사용자의 인식 때문에 현재 생산되는 순환골재의 대부분이 성 복토용 등 저부가가치용으로만 사용되고 있는 실정이다. 이에 순환골재에 대한 홍보와 순환골재 콘크리트에 대한 사용자의 인식을 개선하기 위해 순환골재를 100% 적용한 구조물의 장기 모니터링을 실시하여 순환골재 콘크리트의 구조체 적용 가능성을 확인했다.

• Steel and Composite Structures
• /
• 제6권3호
• /
• pp.257-284
• /
• 2006

The behaviour of hollow structural steel (HSS) stub columns and beams filled with normal concrete and recycled aggregate concrete (RAC) under instantaneous loading was investigated experimentally. A total of 40 specimens, including 30 stub columns and 10 beams, were tested. The main parameters varied in the tests were: (1) recycled coarse aggregate (RCA) replacement ratio, from 0 to 50%, (2) sectional type, circular and square. The main objectives of these tests were threefold: first, to describe a series of tests on new composite columns; second, to analyze the influence of RCA replacement ratio on the compressive and flexural behaviour of recycled aggregate concrete filled steel tubes (RACFST), and finally, to compare the accuracy of the predicted ultimate strength, bending moment capacity and flexural stiffness of the composite specimens by using the recommendations of ACI318-99 (1999), AIJ (1997), AISC-LRFD (1999), BS5400 (1979), DBJ13-51-2003 (2003) and EC4 (1994).

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.7-16
• /
• 2015

PURPOSES : This study was performed to determine a systematic approach for measuring the coefficient of thermal expansion (COTE) of concrete specimens. This approach includes the initial calibration of measurement equipment. Test variables include coarse aggregate types such as natural aggregate, job-site produced recycled concrete aggregate, and recycled aggregate processed from an intermediate waste treatment company. METHODS : First, two cylindrical SUS-304 specimens with a known COTE value of $17.3{\times}10^{-6}m/m/^{\circ}C$. were used as reference specimens for the calibration of each measurement system. The well-known AASHTO TP-60 COTE apparatus for concrete measurement was utilized in this study. Four different measurement apparatuses were used with each LVDT installed and a calibration value was determined using each measurement apparatus. RESULTS : In the initial experimental stage, calibration values for each measurement apparatus were assumed to be almost identical. However, using the SUS-304 samples as a reference, the calibration values for the four different measurement apparatuses were found to range from 3.49 to $8.86{\times}10^{-6}m/m/^{\circ}C$. Using different adjusted values for each measurement apparatuses, COTE values for the three different concrete specimens were obtained. The COTE value of concrete made with natural coarse aggregate was $9.91{\times}10^{-6}m/m/^{\circ}C$, that of job-site produced recycled coarse aggregate was $10.45{\times}10^{-6}m/m/^{\circ}C$, and that of recycled aggregate processed from the intermediate waste treatment company was $10.82{\times}10^{-6}m/m/^{\circ}C$. CONCLUSIONS : We observed that the COTE value of concrete made from recycled concrete aggregates (RCA) was higher than that of concrete made from natural coarse aggregate. This difference is due to the fact that the total volumetric mortar proportion in the RCA mix is higher than that in the concrete mix made with natural coarse aggregate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.133-136
• /
• 2005

Compressive strength of recycled aggregate concrete was tested by the core and by the non-destructive testing. A prediction model of compressive strength considering the replacement level of recycled aggregate was suggested by multi-regression analysis and was compared with test results. Also, Test results showed that the ratio of compressive strength by core and non-destructive testing to actual was somewhat affected by the replacement level of recycled aggregate.

• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.63-70
• /
• 2004

The objective of this study is to evaluate the compressive strength of recycled aggregate concrete by the non-destructive testing. Main experimental variables were the replacement level of recycled aggregate and blast-furnace slag, which were divided into two series according to recycled aggregate maximum size. Test results showed that a recycled aggregate had a significant influence on the non-destructive testing results, such as rebound number, Ultrasonic pulse velocity, and frequency. A prediction model of compressive strength considering the replacement level of recycled aggregate was suggested by multi-regression analysis and was compared with test results.