• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.2
• /
• pp.155-160
• /
• 1999

Recently, the study on mix design of lightweight concrete using the polystyrene foam balls is put into practice from the viewpoint to grade up the quality of concrete and recyclable usage of industrial by products. Polystyrene aggregate concrete, PAC, can be used as structural concrete in low strength application. For instance, PAC could be used in the middle part of sandwich panel where stresses are generally low and in the case of grid-type reinforcement where it does not need high bond strength but little compressive strength to resist the pressure of transverse reinforcement. From this point of view, the authors discussed the influence of fluidity and compressive strength of concrete by the difference of the volume percentage of polystyrene foam balls and water cement ratio.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1269-1273
• /
• 1997

The system which employs iron, palladium, molecular oxygen and hydrogen as a model mono-oxygenase, has been investigated to develop a new method for selective cyclohexane oxidation uner mild conditions. This system provides much higher yield and selectivity for the formation of cyclohexanol and cyclohexanone compared to that of the existing industrial method. When the catalytic system, FeCl2-Pd/alumina, was employed, the oxidation system required acetone as a solvent to be efficient and acidifying the solvent by a little addition of acetic acid or HCl made the system more efficient. The Pd catalyst was recyclable without a significant deactivation but the recycling of ferrous chloride showed the decrease in the activity. On the other hand, the heterogeneous catalytic system, Pd/Fe2O3 could be recovered easily and reused after drying treatment.

• Journal of Energy Engineering
• /
• v.28 no.1
• /
• pp.45-48
• /
• 2019

Currently, the global atmosphere around the world is altering at a very rapid pace. Among those changes, some are beneficial, but most of the changes are lead to destruction to our planet. The area of environmental science is a significant resource for learning more about these changes. Due to the urbanization, the human population is increasing, natural resources becoming very limited. To solve the limited resources issues, recycling is absolutely an alternative source for the new demands and limitations. Recycling education is very important to raise awareness among students and their communities about the need for recycling and what materials are recyclable locally. In this paper, we reported the role of sustainability science and technology and the impact of recycling research education in the middle schools, both in developing countries and Asian countries and also we included the brief data of global recycling of waste.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.495-497
• /
• 2022

COVID-19 상황이 지속됨에 따라 플라스틱 쓰레기 배출량은 해마다 기하급수적으로 증가하고 있는 반면 플라스틱 폐기물의 재활용률은 현저히 낮은 편에 속한다. 이러한 문제점들을 해결하기 위해 국가적으로 여러 플라스틱 폐기물 중 순환 가능한 PET를 분리하여 수거하고자 하는 노력을 하고 있다. 하지만, 현재 대량의 플라스틱 폐기물은 수거되는 시점부터 여러 폐기물과 혼합된 형태로 재활용 센터에 수거되어 추가 분류하는 인적자원이 요구되는 문제점이 존재한다. 따라서 본 논문에서는 이러한 한계점들을 해결하기 위해 AI 기술 중 하나인 Multi-Object Detection의 YOLOv7 모델을 적용하여 실시간으로 PET에 부착된 객체들을 탐지함으로써 순환 가능한 PET만을 분류하는 YOLOv7 기반 순환 가능한 PET 분류시스템을 설계 및 구현한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.23-24
• /
• 2023

In this study, an easily recyclable separable glued-laminated timber (GLT)-steel beam was developed, and a structural design method was presented. The GLT and steel were mechanically composited using self-tapping screws. The GLT-steel beam was designed to fail in the compression of GLT. The bending moment and load-carrying capacity of the GLT-steel beam were predicted based on composite beam theory and compared with experimental test data. As a result, the GLT-steel beam exhibited ductile behavior, and compression failure of GLT was observed. The screw connection showed no damage while the steel plate was extended. The load-carrying capacity of GLT after failure was similar to the load resistance predicted by the compressive strength of GLT and the tensile strength of steel. This indicates that the ductile behavior of the GLT-steel beam can be safely designed by the tensile strength (yield) of steel.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.47-51
• /
• 2001

There are two strategies to cope with the troubles in landfill site after closure. The first method is active in a way that the wastes are dug up and the recyclable materials are reutilized, meanwhile the materials not recyclable are incinerated in order to minimize the volume of residues to be disposed of. The second method is rather passive and defensive in a way that the source of contamination, that is, buried wastes are not treated. Instead, the transport of leaking leachate and gases generated from the wastes are intercepted and controlled. In this study, as a passive way of the efficient leachate blocking process, applicabilities of geocrete and soluble sodium silicate as a substitute to control leachate leaking from landfill sidewall were investigated. In case of compression test, the strength of mixture I (Geocrete:Sodium silicate=1:3.9 v/v) and mixture II (Geocrete:Sodium silicate=1:2.5 v/v), even after 7 days' curing was higher than the minimum allowance to tolerate the loading(5 kg/$\textrm{cm}^2$). Soaking in the acid fur 4 days and 7 days respectively, the compressive strength of the specimens reduced seriously. The toxicity of geocrete is not detected through the bioassay test, once it was mixed with sodium silicate and the complex was formed. The hydraulic conductivity of the mixtures even after 7 days' curing was lower than the threshold limit $(1.0\times10_{-7}cm/s)$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2786-2793
• /
• 2009

Recently, the development and spread of the new recyclable energy becomes urgent because of the depletion of fossil fuel and strengthening the environmental regulation. To recovery from the waste out of the many new recyclable energies has been proved as the most favorable when the potential value of energy source is compared. The RDF from the waste has been approved as the most economical method out of the other methods. However, the toxic gases (HCl, Dioxin etc) and heavy metals generated during the burning of the industrial wastes have been pointed out as problems. The PVC, alkali metal chloride, and alkaline earth metal chloride are major materials for emitting the chlorine and chlorine compounds have the problem such as the erosion on the heat collection device. This research has analyzed the heavy metal components containing in the industrial waste, and the concentration of Cl and S in the industrial waste generated in B industrial complex are slightly high than that of the A industrial complex. The results can be used to discuss the origin of inorganic components in industrial waste and utilized as a base data to improve the performance of the RDF as fuel.

• Hwankyungkyoyuk
• /
• v.20 no.2
• /
• pp.93-107
• /
• 2007

Livestock agriculture plays an essential role Hongsung's economy. Unfortunately, if manure is manage properly it can contaminate water and pollute the air. The purposes of this study were to provide awareness of environmental impact and to design educational programs with sustainable agriculture. I used the specific steps of processes. First, collecting informations through survey on environmental awareness of livestock farmers in Hongsung-gun and recognizing the tendencies. Second, analyzing on educational status of livestock farmers. Third, finding objectives of environmental educational programs. At the end of processes, establishing programs which concerning on environmental education. I used two research methods to gather and analyze the data for developing an environmental education program. The first one is a general survey among 50 livestock farmers from Hongseong-gun, Chungcheongnam-do. The second one is the in-depth interviews with specialists in environmental education and government officials from the central government - the Ministry of Agriculture and Forestry - and the local government - Hongsung-gun who are in charge of livestock farming. I found the following results from this research. First, most livestock farmers replied with 'highly likely' to the five items on the recognition of the necessity of environment preservation, whereas only 38.7% answered with 'likely' to the item on the environmental pollution caused by livestock farming. This shows the tendency that they have less recognition of the reality than necessary. Second, most of the contents among 5 areas(knowledge, recognition, function, attitude, and participation) are the knowledge areas. That results are analyzed training materials for livestock farmers made by Hongsung-gun in 2004 and in 2005 by using goal categories suggested in the Tbilisi Resolution. Third, after analyzing the survey and in-depth interviews, I found that the need for education to recognize the environmental pollution, environmental protection and recycling of the livestock waste. We can summarize conclusions from this research. First, we need on educational program improve the livestock farmers' recognition of importance in environmental protection. Second, it is necessary to develop educational program with the viewpoint that livestock waste is not one of the culprits of the environmental pollution, but a recyclable resource. Third, contents of the environmental education program, should include all the educational elements, namely, knowledge, recognition, attitude, function and participation. The education for livestock farmers requires a research on the environmental education program that can be used with crop farmers who can use the resources recycled from the livestock waste from the viewpoint of recycling resources. This research is focused on the collection and analysis of the basic data for developing an environmental education program and the composition of the program. A further research on the implementation and assessment of this program is required.

• Journal of Forest and Environmental Science
• /
• v.25 no.2
• /
• pp.131-138
• /
• 2009

Recently, various efforts for the extended utilization of woody biomass has been attempted due to the fact that global warming, energy and environmental problems are urgent ones to be solved. Development of new energy sources at our national security level is desperately needed as we depend on almost all of energies supplied from other countries, let alone the economic crisis caused by oil price hike. Woody biomass can be converted to energy by means of thermochemical, biological, or direct combustion processes. Many processes are available for producing bioenergy, such as bioethanol, wood pellet, wood chip, combined heat, and power system. Political support and R&D investment should be provided that can boost the utilization of the wood biomass, the eco-environment, and recyclable and alternative energy resources for national power security. In addition, a long-term strategy that can utilize unused and low efficient woody biomass resources, and systematically collect and manage them in a national level should be set up. Even though the possibility in total exchange of fossil oil with woody biomass is quite low, technology developments of woody biomass for the solution to global warming and environmental problem through its commercialization are expected to grow steadily.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.4
• /
• pp.537-542
• /
• 2014

This study was carried out to optimize cholesterol removal in whole egg using crosslinked ${\beta}$-cyclodextrin (${\beta}$-CD) and to recycle the ${\beta}$-CD. Various factors for optimizing conditions were concentration of the ${\beta}$-CD, mixing temperature, mixing time, mixing speed and centrifugal speed. In the result of this study, the optimum conditions of cholesterol removal were 25% crosslinked ${\beta}$-CD, $40^{\circ}C$ mixing temperature, 30 min mixing time, 1,200 rpm mixing speed and $2,810{\times}g$ centrifugal speed. The recycling was repeated five times. The cholesterol removal was 92.76% when treated with the optimum conditions. After determining the optimum conditions, the recyclable yields of the crosslinked ${\beta}$-CD ranged from 86.66% to 87.60% in the recycling and the percentage of cholesterol removal was over 80% until third recycling. However, the cholesterol removal efficiency was decreased when the number of repeated recycling was increased. Based on the result of this study, it was concluded that the crosslinked ${\beta}$-CD was efficient for cholesterol removal in whole egg, and recycling is possible for only limited repeating times due to the interaction of the ${\beta}$-CD and egg protein.