• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2038-2045
• /
• 2021

The main objective of this work is to propose a reliable routine standard operation procedures (SOP) for structural health monitoring and diagnosis of nuclear power plants (NPPs). At present, NPPs have monitoring systems that can be used to obtain the quantitative health record of containment (CTMT) buildings through system identification technology. However, because the measurement signals are often interfered with by noise, the identification results may introduce erroneous conclusions if the measured data is directly adopted. Therefore, this paper recommends the SOP for signal screening and the required identification procedures to identify the dynamic characteristics of the CTMT of NPPs. In the SOP, three recommend methods are proposed including the Recursive Least Squares (RLS), the Observer Kalman Filter Identification/Eigensystem Realization Algorithm (OKID/ERA), and the Frequency Response Function (FRF). The identification results can be verified by comparing the results of different methods. Finally, a preliminary CTMT healthy record can be established based on the limited number of earthquake records. It can be served as the quantitative reference to expedite the restart procedure. If the fundamental frequency of the CTMT drops significantly after the Operating Basis Earthquake and Safe Shutdown Earthquake (OBE/SSE), it means that the restart actions suggested by the regulatory guide should be taken in place immediately.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.1197-1211
• /
• 2011

The actual power performance of historical structural change tests are compared under various alternatives. The tests of interest are F, CUSUM, MOSUM, Moving Estimates and empirical distribution function tests with both recursive and ordinary least-squares residuals. Our comparison of the structural tests involves limiting distributions under the hypothesis, the ability to detect the alternative hypotheses under one or double structural change, and smooth change in parameters. Even though no version is uniformly superior to the other, the knowledge about the properties of those tests and connections between these tests can be used in practical structural change tests and in further research on other change tests.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.984-990
• /
• 2013

This paper develops a new Intelligent Electronic Device (IED), and then presents an application method of a monthly load forecasting algorithm on the smart IEDs. A Multiple Linear Regression (MLR) model implemented with Recursive Least Square (RLS) estimation is established in the algorithm. Case Study proves the accuracy and reliability of this algorithm and demonstrates the practical meanings through designed screens. The application method shows the general way to make use of IED's smart characteristics and thereby reveals a broad prospect of smart function realization in application.

• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.306-313
• /
• 2000

The homogenization method and the density function method are common approaches to evaluate the equivalent material properties for design cells composed of matter and void. In this research, using a new topology optimization method based on the homogenized material with a penalty factor and the chessboard prevention strategy, we obtain the optimal layout of a structure for the natural frequency of a designated mode. The volume fraction of nodes of each finite element is chosen as the design variable and a total material usage constraint is imposed. In this paper, the subspace method is used to evaluate the eigenvalue and its corresponding eigenvector of the structure for the designated mode and the recursive quadratic programming algorithm, PLBA algorithm, is used to solve the topology optimization problem.

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.87-93
• /
• 2005

A new method for real-time estimating left ventricular relaxation time constant (T) from the left ventricular (LV) pressure waveform, based on the isovolumic relaxation model, is proposed. The presented method uses a recursive least squares (RLS) algorithm to accomplish real-time estimation. A new criterion to detect the end-point of the isovolumic relaxation period (IRP) for the estimation of T is also introduced, which is based on the pattern analysis of mean square errors between the original and reconstructed pressure waveforms. We have verified the performance of the new method in over 4,600 beats obtained from 70 patients. The results demonstrate that the proposed method provides more stable and reliable estimation of τ than the conventional 'off-line' methods.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.310-314
• /
• 2008

This paper proposes a very novel method which makes it possible that state feedback controller can be designed for unknown dynamic system with measurable states. This novel method uses the support vector machines (SVM) with its function approximation property. It works together with RLS (Recursive least-squares) algorithm. The RLS algorithm is used for the identification of input-output relationship. A virtual state space representation is derived from the relationship and the SVM makes the relationship between actual states and virtual states. A state feedback controller can be designed based on the virtual system and the SVM makes the controller with actual states. The results of this paper can give many opportunities that the state feedback control can be applied for unknown dynamic systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.849-853
• /
• 2014

In micro-scale electromechanical systems, the power to perform accurate position sensing often greatly exceeds the power needed to generate motion. This paper explores the implications of sampling rate and amplifier noise density selection on the performance of a system identification algorithm using a capacitive sensing circuit. Specific performance objectives are to minimize or limit convergence rate and power consumption to identify the dynamics of a rotary micro-stage. A rearrangement of the conventional recursive least-squares identification algorithm is performed to make operating cost an explicit function of sensor design parameters. It is observed that there is a strong dependence of convergence rate and error on the sampling rate, while energy dependence is driven by error that may be tolerated in the final identified parameters.

• Speech Sciences
• /
• v.8 no.2
• /
• pp.73-81
• /
• 2001

In this paper, we focus on the real time implementation of the single channel adaptive noise canceller(ANC) by using TMS320C30 EVM board. The implemented single channel adaptive noise canceller is based on a reference paper [1] in which it is simulated by using the recursive average magnitude difference function(AMDF) to get a properly delayed input speech on a sample basis as a reference signal and normalized least mean square(NLMS) algorithm. To certify results of the real time implementation, we measured the processing time of the ANC and enhancement ratio according to various signalto-noise ratios(SNRs). Experimental results demonstrate that the processing time of the speech signal of 32ms length with delay estimation of every 10 samples is about 26.3 ms, and almost the same performance as given in [1] is obtained with the implemented system.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.305-307
• /
• 1992

This paper presents a technique, which identifies both process noise covariance and sensor noise covariance by using innovation correlation test. A correlation test, which checks whether the square root Kalman filter is workingly optimal or not, is given. The system is stochastic autoregressive moving-average model with auxiliary white noise Input. The linear quadratic Gaussian control is used for minimizing stochastic cost function. This paper indentifies Q, R, and estimates parametric matrics $A(q^{-1}),B(q^{-1}),C(q^{-1})$ by means of extended recursive least squares and model reference control. And The proposed technique has been validated in simulation results on the fourth order system.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.11
• /
• pp.110-117
• /
• 1995

This study presents and algorithm and related techniques which could satisfy the important properties of check weighers and conveyor scales. The algorithm of Recursive Least Squares Regression is applied for the weighing system simulated as a dynamic model of the second order. Using the model and the algorithm, model parameters and then the mass being weighed can be determined from the step input. The performance of the algorithm was tested on a check weigher. Discussions were extended to the development of noise reduction techniques and to the lagged introduction of objects on the moving plate. It turns out that the algorithm shows several desirable features suitable for real-time signal processing with a microcomputer, which are high precision and stability in noisy environment.