• 제목/요약/키워드: Rectangular Container

검색결과 63건 처리시간 0.033초

조선왕실(朝鮮王室) 태실석함(胎室石函)의 현황(現況)과 양식변천(樣式變遷) (Taesil Seokham Styles of the Joseon Royal Family)

  • 심현용
    • 헤리티지:역사와 과학
    • /
    • 제43권3호
    • /
    • pp.208-241
    • /
    • 2010
  • 본 고는 조선시대 왕실의 태실에 유존하는 태실 석함(이하 태함)의 현황을 살펴보고, 제작연대를 바탕으로 형식을 분류하여 고고학적인 태함의 양식을 설정하고 그 편년을 시도한 것이다. 태함은 태실을 처음 조성할 때 매납하는 유물이지만 명문이 각자되지 않으므로 태함 자체만으로 연구하기에는 큰 어려움이 따른다. 하지만 태실 조성 시 함께 제작하는 태지석과 아기비의 명문을 찾아 살펴보고 문헌기록을 대조하여 그 제작시기를 밝힘으로 인해 태함의 제작시기도 밝혀 낼 수 있다. 먼저, 편년의 결정적 요소는 태함을 구성하는 함개와 함신 모두임을 알 수 있었으며, 또한 태함의 변화와 양식은 크게 4단계로 구분할 수 있었다. 조선 왕실의 태함의 변화는 조선 초기에는 고려시대의 양식을 이어받아 상자형으로 만들었으나, 15세기 중 후엽에 과도기를 거쳐 15세기 후엽에 반원형 함개 원통형 함신이 정착하게 된다. 그리고 16세기 후엽에는 앞 시기의 양식에서 발전하여 태함에 돌기가 부착되는 등 장식성이 가미되나, 이는 예술성보다는 기능성에 기인한 것으로 판단된다. 하지만 반원형 함개 원통형 함신이 다시 17세기 초에 재현되며, 17세기 중엽 후부터는 함개에만 돌기가 있거나 무보주의 원추형 함개 또는 절구형의 함신 등 다양하게 나타나는 과도기의 현상이 발생한다. 그러나 다시 보주가 부착된 원추형 함개라는 새로운 양식이 18세기 전엽~18세기 중엽 초에 출현하며, 이것이 다음 시기인 18세기 중엽까지 지속되나, 함신의 감실이 일단벽호형의 방형으로 바뀐다. 계속해서 18세기 중엽에는 함개는 앞 시기의 양식을 유지하나 함신은 감실이 다시 한 면이 ㄷ모양의 열쇠구멍형으로 변화한다. 하지만, 18세기 말에 와서 다시 가장 전형적인 양식인 반원형 함개 원통형 함신의 태함이 재출현하여 태함의 양식이 이 형태가 가장 정형성이 있음을 보여준다. 마지막으로 19세기 중엽에는 함개가 반원형에서 상부가 편평한 장방형의 새로운 양식이 출현하여 쇠퇴기를 맞는다. 그리고 이를 다시 양식상 크게 4단계로 구분할 수 있는데, 조선 초에는 태함이 아직 정형화되지 않아 고려시대의 양식을 이어받았으나(I단계; 1401~15C 중엽), 15세기 후엽부터는 자체적인 발전을 거듭하여 정형화되고(II단계; 1477~1641), 시기가 지나면서 다시 일부 돌기나 보주가 부착되는 등 장식성이 가미되나(III단계; 1660~1754), 결국 18세기 말에는 정형화된 양식이 재출현하다가 조선 말기인 19세기 중엽에는 간략화되어 쇠퇴과정을 겪게 되는 것(IV단계; 1790~1874)을 알 수 있었다. 그러므로 이러한 태함의 양식과 편년 결과는 문헌기록이 부족한 상태에서 앞으로 태실지에서 태함만 확인되더라도 그 조성시기와 주인공이 누구인지 밝혀내는 데 많은 도움이 되리라 생각된다.

경계요소-유한요소 연계법에 의한 구형 수조구조물의 동적거동 특성해석 (Analysis of Dynamic Behavior of Flexible Rectangular Liquid Containers by the Coupled Boundary Element-Finite Element Method)

  • 고현무;박장호;김재관
    • 대한토목학회논문집
    • /
    • 제14권5호
    • /
    • pp.1033-1042
    • /
    • 1994
  • 2차원 경계요소-유한요소 연계법을 사용하여 구형 수조구조물의 동적거동 특성을 파악하였다. 비점성, 비압축성 이상유체의 운동은 경계요소법으로 모델링하였으며 구조물의 운동은 유한요소법으로 모델링하였다. 경계요소법의 적용시 Singularity를 소거한 경계적분식을 사용하였다. 유체와 구조물의 경계면에서 적합조건과 평형조건을 만족시킴으로써 경계요소와 유한요소를 연계하였다. 유체-구조물 상호작용의 영향은 유체의 부가질량행렬과 유체 유동에 의한 강성행렬로 연계된 유체-구조물계에 반영된다. 연계된 유체-구조물계의 고유치 문제로부터 수조구조물의 고유진동수외 고유모드를 구하였으며 수평 및 수직 자바운동에 의하여 수조구조물에 발생하는 유체동압력과 자유수면의 유동도 산출하였다.

  • PDF

Isothermal Characteristics of a Rectangular Parallelepiped Sodium Heat Pipe

  • Boo Joon Hong;Park Soo Yong
    • Journal of Mechanical Science and Technology
    • /
    • 제19권4호
    • /
    • pp.1044-1051
    • /
    • 2005
  • The isothermal characteristics of a rectangular parallelepiped sodium heat pipe were inves­tigated for high-temperature applications. The heat pipes was made of stainless steel of which the dimension was $140\;m\;(L)\;{\times}\;95m\;(W)\;{\times}\;46 m\;(H)$ and the thickness of the container was 5 mm. Both inner surfaces of evaporator and condenser were covered with screen meshes to help spread the liquid state working fluid. To provide additional path for the working fluid, a lattice structure covered with screen mesh wick was inserted in the heat pipe. The bottom surface of the heat pipe was heated by an electric heater and the top surface was cooled by circulating coolant. The concern in this study was to enhance the temperature uniformity at the bottom surface of the heat pipe while an uneven heat source up to 900 W was in contact. The temperature distribution over the bottom surface was monitored at more than twenty six locations. It was found that the operating performance of the sodium heat pipe was critically affected by the inner wall temperature of the condenser region where the working fluid may be changed to a solid phase unless the temperature was higher than its melting point. The maximum temperature difference across the bottom surface was observed to be $114^{\circ}C$ for 850 W thermal load and $100^{\circ}C$ coolant inlet temperature. The effects of fill charge ratio, coolant inlet temperature and operating temperature on thermal performance of heat pipe were analyzed and discussed.

고흡수성 중합물질의 자연발화에 대한 실험적 연구 (Experimental Study on Autoignition of Superabsorbent Polymers)

  • 허종만;최재욱
    • 한국재난정보학회 논문집
    • /
    • 제19권2호
    • /
    • pp.280-291
    • /
    • 2023
  • 연구목적: 생활의 편의를 위한 고흡수성 중합물질의 생산 및 저장 사업장에서 발화사고가 발생하고 있어 이에 대한 실질적인 예방대책 수립을 위한 기초자료의 확보를 위해 실험적인 연구를 하였다. 연구방법: 시료용기(가로 20cm×세로 20cm) 폭을 각각 3cm, 5cm, 7cm, 14cm의 크기로 입방체 형상으로 하여 무한평판에 접근하도록 하였고, 300mesh의 스테인리스 망으로 전면과 뒷면을 일차원 방향으로 열이 전달되게 하였다. 이 시료용기를 온도제어장치 프로그램을 미리 설정하여 소정의 온도로 가열되도록 한항온조 중심에 위치시키고 중심온도가 설정온도보다 20℃이상 상승하였을 때를 「발화」로, 시료의 중심온도가 설정온도의 근사치에 유지되었을 경우를 「비발화」로 판정하였다. 연구결과: 자연발화한계온도는 시료용기 폭이 3cm일 경우 217.5℃, 5cm일 경우 212.5℃, 7cm일 경우 202.5℃, 그리고 14cm일 경우에는 187.5℃로 산출되었다. 최고온도에 도달하는 발화유도시간은 3cm일 경우 약 34시간, 5cm일 경우 약 76시간, 7cm일 경우 약 143시간, 그리고 14cm일 경우 약 318시간으로 나타났다. 결론: ① 용기의 크기가 증가할수록 자연발화온도는 낮아지고, 최고온도에 도달되는 발화유도시간은 길어지는 것으로 나타났다. ② 겉보기활성화에너지는 44.92 [kcal/mol]을 구하였으며, 상관도는 96.93%이었다.

병렬계산에 의한 비축대칭 3차원 스핀업 유동해석 (Analysis of Three-dimensional Nonaxisymmetric Spin-up by Using Parallel Computation)

  • 박재현;최윤환;서용권
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집E
    • /
    • pp.512-517
    • /
    • 2001
  • In this study, spin-up flows in a rectangular container are analysed by using three-dimensional computation. In the numerical computation, we use the parallel computer system of PC-cluster type. We compared our results with those obtained by two-dimensional computation. Effect of velocity and vorticity on the flow is studied. The result shows that two-dimensional solution is in good agreement with the 3-D result. Attention is given to the region where the 3-D flow is significant.

  • PDF

스핀업 유동에서의 비선형 에크만 분출 모형의 성능평가 (Performance Evaluation of Nonlinear Ekman Pumping Models for a Spin-up Flow)

  • 최윤환;서용권
    • 한국해안해양공학회지
    • /
    • 제13권4호
    • /
    • pp.273-281
    • /
    • 2001
  • 본 연구에서는 종횡비가 2인 직사각형 용기에 대한 스핀업 유동을 실험과 수치해석으로 연구하였다. 수치해석에서는 1차-, 2차- 에크만 펌핑 모형을 사용한 경우와 평정을 무시한 경우에 관해 유동장을 구하였으며, 실험에서는 고전적인 PIV 방법을 통하여 속도장을 구하였다. 연구결과, 1차-, 2차- 에크만 펌핑 모형은 실험과 유사하게 나타났으며, 펌핑을 무시한 경우는 상이한 유동양상을 보였다.

  • PDF

외부유동에 의한 캐버티 내의 비정상 유동특성 (Unsteady Flow in a Cavity Induced by An Oscillatory External Flow)

  • 서용권;박준관;문종춘
    • 한국해양공학회지
    • /
    • 제10권3호
    • /
    • pp.105-116
    • /
    • 1996
  • In this paper, we report the experimental results for the flow pattern and the material transport around a cavity subject to a sinusoidal external flow at the far region to ward the open side of the cavity. A tilting mechanism is used to generate a oscillatory flow inside a shallow rectangular container having a cavity at one side. The surface flow visualization is performed to obtain the unsteady behavior of vortices generated at two edges situated at the entrance of the cavity. It was found that at the period 4.5 sec., the behavior of the vortices is asymmetric, and there exists a steady residual flow in the cavity. The bottom flow patterns are also visualized. There are two regions outside of the cavity where the bottom fluid particles concentrate. The material transport in this flow model is very peculiar; fluid particles in the cavity flows outward through the passage along the walls starting from the edges, and particles in the outer region approach the cavity from the central region.

  • PDF

Studies on the Artificial Rearing of Mole Cricket, Gryllotalpa orientalis (Orthoptera : Gryllotalpidae)

  • Park, Young-Kyu;Lee, Young-Bo
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제25권2호
    • /
    • pp.175-179
    • /
    • 2012
  • The present study is to develop the rearing method of Gryllotalpa orientalis. In total 429 of G. orientalis were collected from the field rearing cage ($25m^2$) in 2012. Its sex ratio was 1: 1.15(Female : Male). Survival rate of the mole crickets was 94.4~86.1% with the artificial diets formulated for the present study. Successful oviposition rate was 20, 20 and 80% for one, two and three pairs of adult crickets, respectively, from the indoor rearing. The mean number of hatchlings was $11.8{\pm}21.7$, $15.7{\pm}26.4$ and $25.8{\pm}38.8$, and the mean number of dead hatchlings 1.2, 1.7 and 1.2. The mortality of nymphs on horticultural soil and clay sand mixed with ocher was 18.3 and 10.0%, respectively. The mortality of nymphs in circular and rectangular cages was, respectively, 60 and 40%.

비선형 에크만 분출 모델 (Non-Linear Ekman Pumping Model)

  • 박재현;김정환;김동균;배석태;김정렬
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2006년도 전기학술대회논문집
    • /
    • pp.305-306
    • /
    • 2006
  • Developed in this study is a nonlinear Ekman pumping model to be used in simulating the rotating flows with quasi-three-dimensional Navier-Stokes equations. In this model, the Ekman pumping velocity is given from the solution of the Ekman boundary-layer equations for the region adjacent to the bottom wall of the flow domain; the boundary-layer equations are solved in the momentum-integral form. The developed model is then applied to rotating flows in a rectangular container receiving a time-periodic forcing. By comparing our results with the DNS and experimental data we have validated the developed model. We also compared our results with those given from the classical Ekman pumping model. It was found that our model can predict tile rotating flows more precisely than the classical linear model.

  • PDF

Comparison between Water and N-Tetradecane as Insulation Materials through Modeling and Simulation of Heat Transfer in Packaging Box for Vaccine Shipping

  • Dao, Van-Duong;Jin, Ik-Kyu;Hur, Ho;Choi, Ho-Suk
    • 청정기술
    • /
    • 제22권1호
    • /
    • pp.45-52
    • /
    • 2016
  • This study reports on the modeling and simulation of heat transfer in packaging boxes used for vaccine shipping. Both water and n-tetradecane are used as primary insulation materials inside a multi-slab system. The one-dimensional model, which is a spherical model using a radius equivalent to the rectangular geometry of container, is applied in this study. N-tetradecane with low thermal diffusivity and proper phase transition temperature exhibits higher heat transfer resistance during both heating and cooling processes compared to water. Thus, n-tetradecane is a better candidate as an insulating material for packaging containers for vaccine shipping. Furthermore, the developed method can also become a rapid and economic tool for screening appropriate phase change materials used as insulation materials with suitable properties in logistics applications.