• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1018-1021
• /
• 2007

This paper explores the use of BEM based NAH to reconstruct the surface vibration of a plate in a rectangular finite cavity, in which the distances between sensors and the nearest points on the source surface are not equal. In such circumstances, different degree of information on propagating and non-propagating wave components will be detected by sensors at different positions, as well as the influence of measurement noise will vary significantly from the nearest points of measurement to the farthest ones. On the other hand, the condition number of the vibro-acoustic transfer function matrix relating normal surface velocities and field pressures will becomes high, numerically indicating an increase of linear dependency between rows of transfer function matrix. The combination of poor measurement and high condition number will result inaccurate reconstruction. Therefore, one approach to be investigated in this work is to select the measurement positions in such ways that reduce measurement redundancy, as it indicated by the condition number. The improvement is found to be significant in the numerical simulations utilizing two different criterions, spanning from over-determined to under-determined cases, and in the validation experiment.

• 한국통신학회논문지
• /
• 제25권6A호
• /
• pp.833-838
• /
• 2000

본 논문에서는 IMT-2000 시스템에 응용될 수 있는 새로운 구조의 광대역 단일 패치 안테나를 제안하였다. 이 안테나는 사각형 금속 패치의 두 방사 모서리에 역시 사각형의 스티브가 각각 연결되어 있는 작고 간결한 구조이면서도 IMT-2000에 할당된 주파수 대역을 포함하는 광대역 특성을 나타내었다. 세그멘테이션 방법과 공동 모델을 함께 사용하여 안테나의 특성을 이론적으로 해석하였고, 실험 결과를 통해 비교.분석하였다. 제안된 구조로 제작된 안테나의 대역폭은 정재파비(VSWR) 2.0 이하를 기준으로 할 때, 230 MHz(11.9%)로 측정되었으며, 스티브가 달려 있지 않은 사각형 패치 안테나(4.5%)에 비해 대역폭이 2.65배만큼 넓어졌음을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.77-82
• /
• 2006

Evaluation of the elliptic blending turbulence model (EBM) together with the two-layer model, shear stress transport (SST) model and elliptic relaxation model (V2-F) is performed for a better prediction of natural convection and thermal stratification. For a natural convection problem the models are applied to the prediction of a natural convection in a rectangular cavity and the computed results are compared with the experimental data. It is shown that the elliptic blending model predicts as good as or better than the existing second moment differential stress and flux model for the mean velocity and turbulent quantities. For thermal stratification problem the models are applied to the thermal stratification in the upper plenum of liquid metal reactor. In this analysis there exist much differences between the turbulence models in predicting the temporal variation of temperature. The V2-F model and EBM better predict the steep gradient of temperature at the interface of thermal stratification, and the V2-F model and EBM predict properly the oscillation of temperature. The two-layer model and SST model fail to predict the temporal oscillation of temperature.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2680-2687
• /
• 2000

The Reynolds equation, incorporating Elrods cavitation algorithm, is discretized on a rectangular grid in computational space through coordinate mapping in order to accurately analyze a herringbone grooved journal bearing of a spindle motor in a computer hard disk drive. The pressure distribution and cavitation area are determined by using the finite volume method. Predicted results are compared to experimental data of previous researchers. It was found that positive pressure is developed within the converging section of the bearing and that a cavity occurs in the diverging section. Cavitation has been neglected in the previous analysis of the herringbone grooved bearing. Load capacity and bearing torque are increased due to the increased of eccentricity and L/D and the decrease of the grooved width ratio. The maximum load capacity was found to occur at a groove angle of 30 degrees while bearing torque remains constant due to the variation of the groove angle. The cavitation region is significantly decreased with the inclusion of herringbone grooves. However, the region increases with the increase of the eccentricity, L/D, groove angle and the rotational speed and the decrease of the grooved width ratio.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.85-95
• /
• 2003

During the design of dies and molds, the cavity of the object is obtained by subtracting it from a surrounding rectangular block. This box is subsequently split into two halves by the parting surface. Similar problems also occur in some RP processes such as LOM, SGC, SLS and 3DP where the machine produces a block inside which the prototype is buried. Determining the orientation of the object inside the box and the corresponding parting surface taking appropriate constraints into account have been addressed by several researchers. However, given the parting surface, the problem of splitting the box development of a software package called OptiLOM (now a module of an RP software Magics 8.0), the authors realized non-triviality of this problem since the loop can spread over as many as 5 faces of the box. In this paper, the authors have tried to bring out the importance of this problem and have presented their algorithm to solve it.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1424-1429
• /
• 2004

Distillation is one of many processes that can be used for the purification of water. It requires an energy input such as heat and solar radiation is a possible source of energy. In this process, water is evaporated, thus separating water vapor from the solute. The vapor is then condensed to pure water. The temperature of the water, the cavity of the enclosure and the surface of the glass was measured everyday. Fifteen points were chosen for the temperature measure using a thermocouple. The inner wall and the bottom of each still was painted black for good absorption of heat. The enforced glass was used for the cover for the entering of solar energy. The size of all of the water baths was the same, but the glass of the rectangular form had a tilted angle. In the case of fine or general weather, the volume of condensed water produced by $45^{\circ}$ and $60^{\circ}$ is very irregular compared to that of $15^{\circ}$ and $30^{\circ}$, In case of a rainy day, the occurrence of the volume of condensed water was similar to that of $15^{\circ}$ and $30^{\circ}$, but the volume of condensed water produced by $30^{\circ}$ was the highest.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.811-818
• /
• 2002

본 논문에서는 안테나의 고조파 방사를 억압하여 고조파 억압 여파기의 필요성을 제거한 단락핀-슬롯 적재 안테나를 설계, 제작하였다. 인셋 급전 방식의 구형 패치 안테나에 단락핀과 슬롯을 적재하여 고조파 억압 특성을 얻어내었다. 구형 패치 안테나의 공동 모델을 이용하여 단락핀과 슬롯의 역할을 해석하였으며 단락핀과 슬롯에 의한 구형 패치 안테나의 특성 변화에 대해 기술하였다. 제안된 안테나는 중심 주파수 5.8 GHz에서 7 dBi의 이득을 나타내었으며 2차, 3차 고조파에서 일반 구형 패치 안테나와 비교하여 안테나의 이득이 -3.3 dB, -14.3 dB의 억압 특성을 나타냄을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.1-15
• /
• 1990

The aim of this study was to investigate the effect of dental therapeutic agent on conduction velocity and threshold current of intradental A- and C-fibers in the cat. Inferior alveolar nerve of cat anesthetized with sodium pentobarbital was exposed and dissected until response of functional single pulp nerve until could be evoked by monopolar electrical stimulation of the crown of the lower left canine teeth. 10ms rectangular pulse was used to determine the threshold current and 1ms rectangular pulse was used to determine conduction velocity. After application of calcium chloride (1, 2, 6M), calcium hydroxide mixed with saline, potassium chloride (0.2, 0.8, 1.6M), eugenol, zinc oxide eugenol to the cavity on the labial surface, conduction velocity and threshold current of single pulp nerve unit were compared with the control. In 10 cats, 24 $A{\delta}$- and 11 C- pulp nerve units were recorded. The mean conduction velocities of $A{\delta}$- and C-fibers were 7.5m/sec (SD=5.8) and 1.2m/sec (SD=0.4), respectively. The mean threshold current was $12.3{\mu}A$ (SD=5.3) for $A{\delta}$-fibers and $24.9{\mu}A$ (SD=8.1) for C-fibers. 1, 2, 6M calcium chloride caused decrease of conduction velocity and remarkable increase of threshold current in $A{\delta}$- and C-fibers. The effect of calcium hydroxide mixed with saline was similar but smaller than calcium chloride solution. 0.2M potassium chloride had insignificant effect. In 0.8M potassium chloride, the threshold current was increased although conduction velocity was not affected. In 1.6M potassium chloride, the threshold current was increased and the conduction velocity was slowed down. Spontaneous activity was recorded frequently for first 5 min but gradually reduced both in $A{\delta}$- and C-fibers. Eugenol had irreversible effect on pulp nerve in that initially there were not certain changes in the conduction velocity and threshold current of $A{\delta}$- and C-fibers, but the responses to electrical stimulation were abruptly disappeared after sustained application and were not recovered. Contrary to eugenol, zinc oxide eugenol did not caused significant increase of the threhold current and caused time dependent decrease of the conduction velocity, and did not show any irreversible change.

• 태양에너지
• /
• 제12권3호
• /
• pp.70-83
• /
• 1992

본 연구에서는 개방된 정사각형 공간안에 일정한 열유속을 방출하는 발열체가 존재할 때, 부력과 표면복사를 고려한 혼합대류특성을 수치적으로 연구하였다. 본 연구의 대상인 유입구를 통해 유체가 흘러들어와서 다시 유출구로 나가는 정사각형공간은 공냉식 전자장비를 모사한 것이다. 이러한 공간안에 존재하는 발연체는 전자칩과 같은 발열성 전자부품을 나타낸다. 본 연구에서 채택한 모델의 크기는 높이 X 넓이가 $0.1[m]{\times}0.1[m]$이며 공간내부는 2차원 층류유동으로 간주하였다. 공기의 유입속도는 0.07[m/s]이고, 유입온도는 $27^{\circ}C$이며, 유입구의 위치는 일정한 위치에 고정되어 있다. 주요 변수로는 발열체의 열유속, 유출구의 위치, 발열체의 위치, 그리고 벽면이 방사율을 선택하였다. 본 연구에서는 외부로부터 유입되어지는 찬공기와 발열체에 의해서 부력의 상승하는 뜨거운 공기의 혼합에 의한 유동특성 및 열전달특성을 복사를 고려하여 고찰하였다. 결과로써 가장 열전달이 활발한 발열체의 위치는 바닥의 좌측벽으로부터 0.075[m]일때이다. 이러한 연구는 실제적으로 전자부품 같은 것의 효율적인 냉각목적에 적용되어질 수 있다.

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.638-647
• /
• 2003

삼각형 패치 안테나에 대해 이론적인 방법과 실험을 통해 연구하였다. 삼각형 패치 안테나는 사각형 패치 안테나와 비슷한 복사 특성을 갖으나, 그 크기를 더 줄일 수 있다. 본 논문에서는 정삼각형 마이크로스트립 패치 안테나를 공동 모델을 사용하여 해석하고, 설계 하였다. 또한 대역폭 향상을 위해 커패시티브 갭과 공기층 갭을 이용하였다. 커패시티브 갭은 패치의 급전점 부근에서 사각형 모양으로 만들었고, 공기층 갭은 유전체 기판과 그라운드 사이에 삽입하여 프로브 인덕턴스를 조정하였다. 안테나 각 부분의 효과와 특성 해석을 위해 상업용 시뮬레이션 툴인 Ensemble 5.0을 사용하였다. 시뮬레이션과 실험을 통하여 삼각형 마이크로스트립 안테나의 대역폭 개선의 가능성을 발견하였다.