• Journal of the Institute of Convergence Signal Processing
• /
• 제6권2호
• /
• pp.95-99
• /
• 2005

This paper presents an accurate recovery method of the reference clock which is needed for network synchronization in two-way satellite multimedia systems compliant with DVB-RCS specification and which use closed loop method for burst synchronization. In these systems, the remote station transmits TDMA burst via return link. For burst synchronization, it obtains reference clock from program clock reference (PCR) defined by MPEG-2 system specification. The PCR is generated periodically at the hub system by sampling system clock which runs at 27MHz $\pm$ 30ppm. Since the reference clock is recovered by means of digital PLL(DPLL) using imprecise PCR values due to variable random jitter, the recovered clock frequency of remote station doesn't exactly match reference clock of hub station. We propose a robust recovery method of reference clock against random delay jitter The simulation results show that the recovery error is remarkably decreased from 5 clocks to 1 clock of 27MHz relative to the general DPLL recovery method.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.565-569
• /
• 2009

This study was conducted to evaluate the effects of different preparation methods on the recovery and quantification of ginsenosides in raw Korean ginseng (Panax ginseng C.A. Meyer). Eight major ginsenosides ($Rb_1$, $Rb_2$, $Rb_3$, Rc, Rd, Re, Rf, and $Rg_1$) were analyzed by high performance liquid chromatography (HPLC), after which the recovery and repeatability of the extraction of those ginsenosides using 3 different preparation methods were compared [A. direct extraction (DE) method, hot MeOH extraction/evaporation/direct dissolution; B. solid phase extraction (SPE) method, hot MeOH extraction/evaporation/dissolution/$C_{18}$ cartridge adsorption/MeOH elution; C. liquid-liquid extraction (LLE) method, hot MeOH extraction/evaporation/dissolution/n-BuOH fractionation]. Use of the DE method resulted in a significantly higher recovery of total ginsenosides than other methods and a relatively clear peak resolution. Use of the SPE and LLE methods resulted in clearer peak resolution, but lower ginsenoside recovery than the DE method. The LLE method showed the lowest ginsenoside recovery and repeatability among the 3 methods. Given that the DE method employed only extraction, evaporation, and a dissolution step (avoiding complicate and time consuming purification), this technique may be an effective method for the preparation and quantification of ginsenosides from raw Korean ginseng.

• KSBB Journal
• /
• 제15권4호
• /
• pp.405-407
• /
• 2000

A novel recovery method was developed to obtain the plant cell and its debris from Taxus chinensis cell cultures By pH control of plant cell cultures plant cell and debris was precipitated. The best pH is between 1.8 and 2.2 to obtain the precipitate of the plant cell and debris. Also paclitaxel is stable in this acidic conditions. This method is very simple an efficient to recover the plant cell and debris from plant cell cultures.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1752-1758
• /
• 2018

In a low-voltage distribution system, the molded case circuit breaker (MCCB) is a widely used device to protect loads by interrupting over-current; however the hot gas generated from the arc discharge in the interrupting process depletes the dielectric recovery strength between electrodes and leads to re-ignition after current-zero. Even though the circuit breaker is ordinarily tripped and successfully interrupts the over-current, the re-ignition causes the over-current to flow to the load again, which carries over the failure interruption. Therefore, it is necessary to understand the dielectric recovery process and the dielectric recovery voltage of the MCCB. To determine these characteristics, a measuring system comprised of the experimental circuit and source is implemented to apply controllable recovery voltage and over-current. By changing the controllable recovery voltage, in this work, re-ignition is driven repeatedly to obtain the dielectric recovery voltage V-t curve, which is used to analyze the dielectric recovery strength of the MCCB. A measuring system and an evaluation technique for the dielectric recovery strength of the MCCB are described. By using this system and method, the measurement to find out the dielectric recovery characteristics after current-zero for ready-made products is done and it is confirmed that which internal structure of the MCCB affects the dielectric recovery characteristics.

• Asia Marketing Journal
• /
• 제17권2호
• /
• pp.97-125
• /
• 2015

In this study, we tried to evaluate the relative importance and find out the differences in consumer perceptions regarding service recovery strategies and the service provider in the distribution industry by using AHP (Analytic Hierarchy Process) analysis method. Therefore in this study, we tried to systematize various recovery strategies which were considered very important during service failure process in the distribution industry and analyze the relative importance for each recovery strategy. We set hierarchy composed of four items of monetary, action-oriented, psychological, and assured level as primary selection criteria and a total of 16 items(indemnity, refund, gift, gift certificate, prompt resolution, exchange, manager support, explanation, apology, empathy, acknowledge, kindness, assortment, after service, manage subcontractor, manage employee) as secondary selection criteria. We tried to take one step further from the service sector and study service recovery strategies specialized in distributor services. This study suggests various implications about service recovery strategies of distributors. First, this study can provide practical implications - e.g. service recovery efforts should be applied differently depending on service channels. There is a perceptual difference with respect to the importance of the types of service recovery strategies between service provider and final customer. Second, we can find theoretical implications in terms of identifying the priorities through hierarchy design of new recovery strategies and comparison of each element from the classifications of the current fractional recovery strategies. We hope to help service providers to build more efficient recovery strategy system based on the results of this study.

• Physical Therapy Korea
• /
• 제2권2호
• /
• pp.98-107
• /
• 1995

Physical therapists use assumptions about motor control in every aspect of their work in treating stroke patients. An understanding of the recovery process after stroke, some neural mechanism of recovery and therapeutic model is critical factor for physical therapist to evaluate and obtain a higher final stage of recovery. The purpose of this article was to review the recovery process after stroke, some neural mechanism of recovery, the role of rehabilitation in the process of recovery, therapeutic model and its limitation. This article will help understanding of recovery process. evaluation, and treatment of the stroke patients. Each therapeutic method consists of a different set of assumptions and they are not completely independent of one another. Therefore specializing in any techniques of physical therapy will not be enough to treat stroke, so we are in need of integrated approach and objective measurement instrument to adequately evaluate and treat stroke patients.

• Special Issue of the Society of Naval Architects of Korea
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.198-205
• /
• 2005

Reduction of labor hour for cleaning up of the used abrasives after blasting. is attempted by improving the efficiency of abrasive recovery process in the protective coating of ship's block, For this purpose, the theoretical background for pneumatic transport technology in the abrasive recovery system as well as experimental evaluation on the effect of design parameters such as flow pattern, saltation velocity and pressure drop on the efficiency of the abrasive recovery system are employed . By optimizing the operating parameters such as the length and diameter of the suction hose, specification of recovery device and recovery mouth, a new method which can dramatically increase the efficiency of abrasive recovery system, is proposed.

• Korean Journal of Food Science and Technology
• /
• 제40권4호
• /
• pp.375-381
• /
• 2008

This study developed the simultaneous analysis method for efficient safety controls of import food of Orange II, Rhodamine B, Para Red, and Sudan dye I-IV among disapproved coloring agents that use is prohibited in foods. The analysis method was developed according to the sample pre-treatment and HPLC conditions, and a documentary survey was used to establish the detection limit of the method, followed by effectiveness verification and recovery percentage examinations. Recovery percentage examination for 26 products resulted Orange II displayed recovery percentage of 96.46-121.26%, Rhodamine B displayed recovery percentage of 70.86-106.53%, Para Red displayed recovery percentage of 97.00-116.86%, Sudan I displayed recovery percentage of 92.93-112.44%, Sudan II displayed recovery percentage of 96.63-115.10%, Sudan III displayed recovery percentage of 92.21-114.73%, Sudan IV displayed recovery percentage of 93.22-122.91%. Correlation coefficient of gradient of this analysis method exhibited more than 0.999, RSD exhibited fewer than 2 as 0.8-1.39%, exactitude exhibited more than 90%. At this time, detection limit and fixed quantity limit decided by each 0.1 mg/L, 0.3 mg/L.

• Journal of KIISE:Information Networking
• /
• 제37권1호
• /
• pp.35-41
• /
• 2010

Since the ad-hoc network allow nodes to communicate each other without infrastructure system and predefined configuration, it comes into the spotlight that is suitable to ubiquitous society. In ad-hoc network, route recovery mechanism is considered important. Normally route recovery is needed to solve the link failure problem because there is no route maintaining system like a router in ad-hoc networks. In this paper we propose BS-AODV(Bidirectional Searching-AODV) route recovery method. The proposed method is a local repair method that can be applied in all of the network area. Unlike a limited local repair method in AODV. the proposed method adopts the bidirectional searching method where the upstream/downstream nodes can send the route maintenance messages. Restricting the flooding of route request messages, the proposed scheme attempts to minimize the costs of local repair, the performance of the proposed scheme is evaluated through the simulations. In two scenarios which variate the node numbers and node speed, the comparison among the proposed scheme, AODV and AOMDV is shown in terms of the control traffic and data delivery ratio.

• Journal of Advanced Navigation Technology
• /
• 제11권4호
• /
• pp.479-484
• /
• 2007

This paper explains the design and implementation of the FRA(Fault Recovery Agent). FRA is a system that is suitable for recovering software error for multimedia distance education based on home network environment. In terms of distributed multimedia systems, the most important catagories for quality of service are a timeless, volume, and reliability. In this paper, we discuss a method for increasing reliability through fault tolerance. This paper explains a performance analysis of an error recovery system running on distributed multimedia environment using rule-based DEVS modeling and simulation techniques. In DEVS, a system has a time base, inputs, states, outputs, and functions. The proposed method is more efficient than the other method in comparison with error ration and processing time.