• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.462-468
• /
• 1999

Room temperature vulcanizing (RTV) silicone rubber has been widely used to coat porcelain insulators to render water repellency to prevent formation of water film on the surface and thus to suppress the leakage current and consequently flashover. However, the electrical property and the hydrophobicity of RTV silicone rubber coating under outdoor condition may be influenced by many environmental factors. In this studyvarious treatments, such as salt-fog, salt water immerging and UV irradiation were applied to the samples to investigate the change of the electrical property and hydrophobicity. As a result the leakage current increased and contact angle decreased asthe degradation time is longer. But the degraded RTV silicone rubber has recovered its hydrophobicity during the drying time in ambient condition because LMW(Low Molecular Weight) silicone fluid diffused from the bulk to the surface.

• Imaging Science in Dentistry
• /
• v.36 no.4
• /
• pp.217-220
• /
• 2006

The review of the literature determines that large osteomas of the mandible are relatively rare. We present a case of a 60-year-old man with painless swelling of the left submandibular area and mild difficulty in breathing. The patient complained that the mass have been progressing slowly for at least 20 years. Radiographic studies showed a giant osteoma that attached to the lingual surface of the left mandibular angle and extended from submandibular space to infratemporal space. After the excision of the tumor the patient made a full recovery.

• Fibers and Polymers
• /
• v.2 no.4
• /
• pp.190-195
• /
• 2001

Additives, such as sodium perborate and borax, were examined in dialdehyde wrinkle resistant finishing of cotton. Results indicated that the whiteness index(WI) of cotton treated with dialdehyde and additive showed about 90% of WI of the untreated cotton but with decrease in wrinkle recovery angle (WRA) due to inhibition effect of these additives. Effect of additive on the WRA reduction was more prominent with glutaraldehyde than with glyoxal. Reduction in WRA of cotton treated with both dialdehydes and boron compound was minimized by simultaneous addition of formic acid in the bath. Addition of formic acid was also generally beneficial in maintaining WI retentions after 8 months storage. Furthermore, boron compounds were also effective in improving retentions of mechanical properties. By FTIR analysis the residual aldehyde group was detected on the dialdehyde-finished cotton, whereas no peak was shown by addition of boron compounds. This suggested that the residual aldehyde group was a main cause of fabric yellowing on the dialdehyde-finished cotton. Dialhehyde with boron compound, therefore, can be used to replace a conventional formaldehyde-containing wrinkle resistant finishing of cotton.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.132-138
• /
• 1998

The dynamic response of symmetric cross-ply and angle-ply composite laminated plates under impact loads is investigated using a higher order shear deformation theory. A modified Hertz law is used to predict the impact loads and a four node finite element is used to model the plate. By using a higer order shear deformation theory, the out-of-plane shear stresses, which can be a crucial factor in the failure of composite plates, are determined with significant accuracy. This is accomplished by using a stress recovery technique using the in-plane stresses. The results compared with previous investigations showed good agreement. It can be seen that this method of analyzing impact problems is more efficient than current three dimensional methods in terms of time and expense.

• International Journal of Aerospace System Engineering
• /
• v.7 no.1
• /
• pp.21-27
• /
• 2020

Quasi steady stall is a phenomenon to characterize the aerodynamic behavior of aircraft at high angle of attack region. Generally, it is exercised from a steady state level flight to stall and its recovery to the initial flight in a calm weather. For a theoretical study, such maneuver is demonstrated in the form of aerodynamic model which consists of aircraft's stability and control derivatives. The current research paper is focused on the appropriate selection of aerodynamic model for the maneuver and estimation of the unknown model coefficients using least-square method. The statistical accuracy of the estimated parameters is presented in terms of standard deviations. Finally, the validation has been presented by comparing the measured data to the simulated data from different models.

• Journal of Korean Home Economics Education Association
• /
• v.7 no.1
• /
• pp.1-10
• /
• 1995

This study was intended to provide an improved method for testing textiles in high school. Four kinds of test subjects were selected and applied to the classes. Problems of the methods in the textbooks were corrected as follows: 1)Burning test: The number of specimen is reduced to 3 kinds of fibers(cotton, wool, and polyester) and recommends are given to make result by comparing with the burning characteris-tics of paper and hair. 2) Absorbency test: Test Method is changed to drop test. The result is recorded by measuring time required for the water drops absorbed to the specimen. 3) Wrinkle recovery test: A glass is provided instead of metal weight. The method of measuring angle which is made by the specimen is shown in figure. 4) Effects of Detergent: 0.2% of detergent solution is provided before class. The amount of oil and carbon black is specified. Students have generally agreed that the improved methods were better than those in the text-books after they made the above 4 recommendable experiments(p<.001)

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.481-487
• /
• 2009

The purpose of this study is to improve the defects of dyeable polypropylene(DPP) fabric by heat setting and to describe the change of physical properties of DPP fabrics. The thermosetting was carried out in autoclave from 100 to $140^{\circ}C$ temperature range for 2 min. In this study, we investigated the effect of the thermosetting temperatures on the structural, thermal, mechanical properties(e.g., the strength and elongation) and dyeability of DPP fabrics. The melting energy(J/g), the tensile strength was found to increase with increasing temperature of thermosetting. The diffraction peak at Bragg angle($2{\theta}$) about $13.8^{\circ}$ were very strong and diffraction intensity increased with increasing thermosetting temperatures. And d-spacing and half-width decreased with increasing thermosetting temperatures. On the other hand, the dyeability(K/S) and crease recovery decreased with an increasing thermosetting temperatures.

• Journal of Chest Surgery
• /
• v.26 no.12
• /
• pp.969-971
• /
• 1993

The sternal turnover has a limited use in an asymmetrical funnel chest. However we tried `One-half sternal turnover` as a new operative approach for an asymmetrical funnel chest. Through the bilateral submammary skin incision, median sternotomy was made from xiphoid process to midsternum and extended horizontally. The segment of ribs were cut at the angle of depression. The en-bloc resected chest wall segment contained one-half sternum as well as a part of ribs and left half of rectus muscle. After turning over the en-bloc segment, reapproximation with wiring was done. Sternotomy wound was closed in layer after placing of substernal drainage tube. Postoperatively, the chest wall was stable and the recovery course was uneventful except left-sided minimal pneumothorax which was cured spontaneaously. The patient was discharged on postoperative 14th day.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.139-145
• /
• 2006

Cotton fabric was treated with montmorillonite (MMT) so as to evaluate its effectiveness on improving its wrinkle resistance. The MMT in emulsion form was applied to cotton fabric by padding and finally the wrinkle resistance of the MMT-treated cotton fabric was improved. Furthermore, instrumental methods were used for studying the presence of MMT particles on the cotton fabric surface. It was noted that nano-scale MMT particles adhered on the fiber surface and the particle size played an important role in influencing the wrinkle resistance of the cotton fabric. The experimental results are discussed thoroughly in this paper.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1172-1177
• /
• 2008

Diverging channel from gas burner exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW steam supply and power generation system. Three different test geometries have been chosen for the numerical simulation. The existing design for 300 kW HRSG system (CASE B) has been improved by geometry and position changes of inlet guide vanes along with gas velocity entrance angle at the diverging channel inlet (CASE C). Both cases has been compared with the case where hot combustion gas is directly injected without any guide vanes (CASE A). Improved design shows overall uniform velocity and temperature distribution compared to existing design.