• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.10-18
• /
• 2004

In this work, Aqueous sericin solution was prepared by degumming process with electrolytic reduction water. Then, the microfiltration and ultrafiltration systems were applied to the concentration of aqueous sericin solution. The objective of this study was to select the optimum operating condition among the different pressure. The permeate flux and rejection ratio were observed with time, pressure, flow rate and concentration. and, the wastewater and permeated water quality values such as pH, BOD, COD, and NH levels were measured. In order to see the influence of electrolytic reduction water, the flux of pure water and electrolytic reduction water by PVDF22(MF) and PS100(UF) membrane was measured. In microfiltration system, the relative flux reduction decreased rapidly to 0.02 in the 30min, as the concentration polarization and gel layer formation were increased. and then the sericin concentration rejection ratio was 40%. In ultrafiltration system, the permeate flux decreased with time and concentration, and increased with the operating pressure and flow rate. Optimal condition in PS100 membrane system for sericin concentration was operating pressure 1.464kgf/$cm^24, operating flow rate $7\ell/min at\; 40^{\circ}C$. At that time, sericin concentration rejection ratio was 83% respectably. The sericin solution was concentrated from 0.1wt% solution to 0.2 wt % solution during about 2 hrs by the UF filteration membrane system.

• Korean Journal of Veterinary Research
• /
• v.43 no.3
• /
• pp.435-438
• /
• 2003

The objective of this study was to investigate the residue depletion of cephaalexin in the flounder (Paralichthys olivaceus) after multiple oral administrations and to establish the appropriate withdrawal time for edible tissues. A highly sensitive and specific method for the determination of cephalexin in the serum of flounder by LC/MS was developed and validated. Mean recoveries from serum were 87.2% (ranged from 81.2% to 94.5%) for cepalexin. Recovery and precision met the criteria for the guideline of residual analysis of veterinary drugs by the National Veterinary Research and Quarantine Service (NVRQS) in Korea. The limit of detection and limit of quantitation of cephalexin were 10 ng/ml and 50 ng/ml, respectively. Residual levels of cephalexin in muscle samples were estimated with 95% tolerance limit and 95% confidence to fall below the MRL after a withdrawal time of 4 days and 5 days for the 40 and 160 mg/kg/day, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2353-2357
• /
• 2013

The objective of this study was to develop a simple, less time-consuming and accurate sampling technique based on solid-phase sorption with activated carbon as the sorbents. The results from solid-phase sorption techniques were compared to that from a conventional solvent impinger-based technique to confirm the efficacy of the proposed method. The laboratory results indicated that the solid-phase sorption method was suitable for the determination of siloxanes as the measured concentrations were similar to that from a solvent impinge method. The data from solid-phase sorption method showed excellent recovery and reproducibility while the sampling was less labor intensive and less time consuming than the solvent impinge method. Following the laboratory tests, the solid-phase sorption technique was successfully applied to sampling biogas from a field site. This study shows that the activated carbon-based solid-phase sorption can be a reliable and less time-consuming option for the sampling and collection of siloxanes under various different landfill conditions.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.3
• /
• pp.169-175
• /
• 2018

Background: The objective of this study was to compare hemodynamic and recovery characteristics of total intravenous anesthesia using propofol target-controlled infusion (TCI) versus sevoflurane for extraction of four third molar teeth. Methods: One hundred patients undergoing extraction of four third molar teeth under general anesthesia were randomized to one of two groups. Group 1 received propofol TCI-oxygen for induction and propofol TCI-oxygen-air for maintenance. Group II received a propofol bolus of 2 mg/kg for induction and sevoflurane-oxygen-air for maintenance. Heart rate, mean arterial pressure (MAP), operating time, time to emergence, nausea and vomiting, and sedation and pain scores were measured in each group. Results: Demographic data, including age, gender, weight, and height, were not significantly different between the two groups. The MAP was significantly higher after intubation (P = 0.007) and injection of anesthesia (P = 0.004) in the propofol group than in the sevoflurane group, with significant reflex bradycardia (P = 0.028). The mean time to emergence from anesthesia using propofol was 25 s shorter than that of sevoflurane (P = 0.02). Postoperatively, the propofol group was less sedated than the sevoflurane group at 30 min (0.02 versus 0.12), but this difference was not significant (P = 0.065). Conclusion: Both propofol TCI and sevoflurane are good alternatives for induction and maintenance of anesthesia for short day-case surgery. However, propofol TCI does not blunt the hemodynamic response to sudden, severe stimuli as strongly as sevoflurane, and this limitation may be a cause for concern in patients with cardiac comorbidities.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.2
• /
• pp.157-163
• /
• 2014

In this paper, a robust MRAC (model reference adaptive control) scheme is applied to control an electrohydraulic positioning system under various loads. The inverse dead-zone compensator in the control system cancels out the dead-zone response, and an integrator added to the controller provides good position-tracking ability. LQG/LTR (linear quadratic Gaussian control with loop transfer recovery) closed-loop model is used as the reference model for learning the MRAC system. LQG/LTR provides a systematic technique to design the linear controller that optimizes the objective function using some compromise between the control effort and the system performance in the frequency domain. Different external load tests are performed to investigate the effectiveness of the designed MRAC system in real time. The experimental results show that the tracking performance of the proposed system is highly accurate, which offers considerable robustness even with a large change in the load.

• Journal of Distribution Science
• /
• v.12 no.12
• /
• pp.5-17
• /
• 2014

Purpose - The purpose of this study is to examine the possible ways to minimize damage by analyzing the influence that may be exerted upon the business process of the distribution industry by unexpected climate change. Research design, data, and methodology - The optimum business process is to be implemented after dividing the diversified business process of the distribution industry into the four stages of the Business Continuity Plan (BCP). Results - First, the upper-level risks that would be impacted most sensitively by climate change have been selected. Second, the impact and characteristics of the environment have been discovered. Third, weighted values by criteria item of upper-level business risks have been analyzed. Fourth, it was possible to define the business priority order based on the individual and then to adjust the Recovery Time Objective (RTO). Conclusion - In this study, the priority order has been defined quantitatively by calculating the priority order score. Further, the priority order has been determined depending on whether any targeted business unit is applicable to the items of the business nature criteria.

• Journal of Nutrition and Health
• /
• v.31 no.7
• /
• pp.1130-1138
• /
• 1998

The objective of this study was to investigate the relationship between changes in body temperature, adiposity and sympathoadrenal activity in normal weight female college students, eating an instant-noodle lunch in a laboratory setting at ambient temperatures of 22-24.8$^{\circ}C$. Preprandial epinephrine(EPI) concentration, as an indicator of adrenal activity, was inversely and significantly correlated with body weight, body mass index(BMI), and waist girth. Changes in pre- and postprandial EPI concentrations showed positive correlations with % body fat, fat mass, waist girth, hip girth, and waist/hip girth ratio(WHR). The preprandial norepinephrine (NE) concentration was negatively correlated with recovery time from the peak postprandial core temperature to the meal-start core temperature(RTST). However, the NE concentration, an indicator of sympathetic neural activity, was not related to anthropometric measurements in normal weight young women. In conclusion, adrenal activity was negatively associated with adiposity and central body fat distribution. Sympathetic activity was related to body temperature regulation capacity after a meal, but was not related to adiposity in normal weight young women. (Korean J Nutrition 31(7) 1130-1138, 1998)

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.321-330
• /
• 2019

The objective of this study was to examine the recovery of the power plant cooling tower blowdown water (CTBD) by membrane distillation. The experiments were carried out using a flat plate poly vinylidene fluoride (PVDF) membrane with a pore diameter of $0.22{\mu}m$ by a direct contact membrane distillation unit (DCMD). The effects of operating parameters such as transmembrane temperature difference (${\Delta}T$), circulation rate and operating time on permeate flux and membrane fouling have been investigated. The results indicated that permeate flux increased with increasing ${\Delta}T$ and circulation rate. Whereas maximum permeate flux was determined as $47.4L/m^2{\cdot}h$ at ${\Delta}T$ of $50^{\circ}C$ for all short term experiments, minimum permeate flux was determined as $7.7L/m^2{\cdot}h$ at ${\Delta}T$ of $20^{\circ}C$. While $40^{\circ}C$ was determined as the optimum ${\Delta}T$ in long term experiments. Inorganic and non-volatile substances caused fouling in the membranes.

• International Journal of Computer Science & Network Security
• /
• v.24 no.5
• /
• pp.212-216
• /
• 2024

Feature Selection have turned into the main point of investigations particularly in bioinformatics where there are numerous applications. Deep learning technique is a useful asset to choose features, anyway not all calculations are on an equivalent balance with regards to selection of relevant features. To be sure, numerous techniques have been proposed to select multiple features using deep learning techniques. Because of the deep learning, neural systems have profited a gigantic top recovery in the previous couple of years. Anyway neural systems are blackbox models and not many endeavors have been made so as to examine the fundamental procedure. In this proposed work a new calculations so as to do feature selection with deep learning systems is introduced. To evaluate our outcomes, we create relapse and grouping issues which enable us to think about every calculation on various fronts: exhibitions, calculation time and limitations. The outcomes acquired are truly encouraging since we figure out how to accomplish our objective by outperforming irregular backwoods exhibitions for each situation. The results prove that the proposed method exhibits better performance than the traditional methods.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.499-512
• /
• 2018

The application of analytical techniques for the rational determination of problems arising from management science and corporate management. In a way that is the opposite of the repair plan that can predict accurate results is increasing utilization of the complex-based analysis methodology. In this study, we examined the application of physical space and the methodological utilization of the pedestrian model analysis that applied the simulation to the Health Checkup Center. The conclusions are as follows. First, the spatial analysis and measurement for empirical research has confirmed that the efficiency assessment through the pedestrian model simulation can lead to an objective evaluation. Second, it seems to be able to reduce the queue through a change in the number of services of the low-pressure and the hearing laboratory, the recovery room with a high proportion of male disturbances and relatively long use time. The third, the spatial density analysis and the time required to reduce the density change in comparative analysis, and the spatial layout changes, the increase in the capacity of 80 people, approximately 16 minutes to shorten the process duration.