• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.141-149
• /
• 2013

IETF 6LoWPAN standard technique has been studied in IoT environment to support the IPv6 packet communication. 6LoWPAN protocol for transmission of packets mainly in the AODV routing protocol and a variety of extended techniques have been investigated. In particular, consisting of nodes with limited resources in a network error occurs when the 6LoWPAN reliable data transfer and fast routing method is needed. To this end, in this paper, we propose resilient routing protocol and extension of IETF LOAD algorithm, for optimal recovery path, More specifically, the optimal recovery path setup algorithm, signal flow, and detailed protocols for the verification of the reliability of packet transmission mathematical model is presented. The proposed protocol techniques to analyze the performance of the NS-3 performance through the simulation results that is end-to-end delay, throughput, packet delivery fraction and control packet overhead demonstrated excellence in comparison with existing LOAD.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.328-334
• /
• 2004

Recently, Software DSMs continue to improve its performance and scalability As Software DSMs become attractive on larger clusters, the focus of attention is likely to move toward improving the reliability of a system. A popular approach to tolerate failures is message logging with checkpointing, and so many log-based rollback recovery schemes have been proposed. In this work, we propose a remote logging scheme which uses the volatile memory of a remote node assigned to each node. As our remote logging does not incur frequent disk accesses during failure-free execution, its logging overhead is not significant especially over high-speed communication network. The remote logging tolerates multiple failures if the backup nodes of failed nodes are alive. It makes the reliability of DSMs grow much higher. We have designed and implemented the FT-KDSM(Fault Tolerant KAIST DSM) with the remote logging and showed the logging overhead and the recovery time.

• The Korean Journal of Physiology and Pharmacology
• /
• v.23 no.1
• /
• pp.63-70
• /
• 2019

We aimed to propose a novel computational approach to predict the electromechanical performance of pre- and post-mitral valve cerclage annuloplasty (MVCA). Furthermore, we tested a virtual estimation method to optimize the left ventricular basement tightening scheme using a pre-MVCA computer model. The present model combines the three-dimensional (3D) electromechanics of the ventricles with the vascular hemodynamics implemented in a lumped parameter model. 3D models of pre- and post-MVCA were reconstructed from the computed tomography (CT) images of two patients and simulated by solving the electromechanical-governing equations with the finite element method. Computed results indicate that reduction of the dilated heart chambers volume (reverse remodeling) appears to be dependent on ventricular stress distribution. Reduced ventricular stresses in the basement after MVCA treatment were observed in the patients who showed reverse remodeling of heart during follow up over 6 months. In the case who failed to show reverse remodeling after MVCA, more virtual tightening of the ventricular basement diameter than the actual model can induce stress unloading, aiding in heart recovery. The simulation result that virtual tightening of the ventricular basement resulted in a marked increase of myocardial stress unloading provides in silico evidence for a functional impact of MVCA treatment on cardiac mechanics and post-operative heart recovery. This technique contributes to establishing a pre-operative virtual rehearsal procedure before MVCA treatment by using patient-specific cardiac electromechanical modeling of pre-MVCA.

• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.65-75
• /
• 2020

The value of tangible assets depreciates over their useful life and this depreciation should be adequately reflected in any tax or financial reports. However, the method used to calculate depreciation can impact the financial performance of solar projects due to the time value of money. Korean tax law stipulates only one method for calculating the depreciation of solar photovoltaic facilities: the straight-line method. Conversely, USA's tax law accepts other depreciation methods as solar incentives, including the modified accelerated cost recovery system (MACRS) and Bonus depreciation method. This paper compares different depreciation methods in the financial analysis of a 10 MW solar system to determine their effect on the financial results. When depreciation was calculated utilizing the MACRS and Bonus depreciation method, the internal rate of return (IRR) was 10.9% and 16.4% higher, respectively, than when the Korean straight-line depreciation method was used. Additionally, the increased IRR resulting from the use of the two US methods resulted in a 20.5% and 27.4% higher net present value, respectively. This shows that changing the depreciation calculation method can redistribute the tax amount during the project period, thereby increasing the discounted cash flow of the solar project. In addition to increasing profitability, USA's depreciation methods alleviate the uncertainty of solar projects and provide more flexibility in project financing than the Korean method. These results strongly suggest that Korean tax law could greatly benefit from adopting USA's depreciation methods as an effective incentive scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.16-24
• /
• 2011

The IEEE 802.11 wireless LAN (Local Area Network) is widely used for wireless access due to its easy deployment and low cost. Multicast in wireless LANs is very useful for transmitting data to multiple receivers compared to unicast to each receiver. In the IEEE 802.11 wireless LAN, multicast transmissions are unreliable since multicast data packets are transmitted without any feedback from receivers. Recently, various protocols have been proposed to enhance the reliability of multicast transmissions. They still have serious problems in reliability and efficiency due to the excessive control overhead by the use of a large number of control packets in the error recovery process, and due to a large number of retransmissions to satisfy all receivers. In this paper, we propose an effective scheme called PTRM(Proactive Transmission based Reliable Multicast). The proposed scheme uses a block erasure code to generate parity packets and to reduce the impact of independent packet error among receivers. After generating parity packets, the PTRM transmits data packets as many as receivers need to recover error, and then requests feedback from them. The simulation results show that the proposed scheme provides reliable multicast while minimizing the feedback overhead.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.111-122
• /
• 2006

As VOD service over the Internet becomes popular, a large sealable VOD system in P2P streaming environment has become increasing important. In this paper, we propose a new proxy caching scheme, called P2Proxy, to replace the traditional proxy with a sealable P2P proxy in P2P streaming environment. In the proposed scheme, each client in a group stores a different part of the stream from a server into its local buffer and then uses a group of clients as a proxy. Each client receives the request stream from other clients as long as the parts of the stream are available in the client group. The only missing parts of the stream which are not in the client group are directly received from the server. We represent the caching process between clients in a group and a server and then describe a group creation process. This paper proposes the directory structure to share the caching information among clients. By using the directory information, we minimize message exchange overload for a stream caching and playing. We also propose a recovery method for failures about the irregular behavior of P2P clients. In this paper, we evaluate the performance of our proposed scheme and compare the performance with the existing P2P streaming systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1710-1718
• /
• 2015

Selected mapping (SLM) is an effective scheme to reduce the peak to average power ratio (PAPR) of an orthogonal frequency division multiplexing (OFDM) system. For data recovery, the receiver needs to know the side information (SI) on the scrambling sequence selected by the transmitter. In this paper, a new SLM scheme is proposed, which can reduce implementation complexity substantially by allowing the receiver to recover the data without SI. In the proposed SLM method, the concept of virtual channel corresponding to the convolution of the multipath channel and the inverse discrete fourier transform (IDFT) of the scrambling sequence is assumed. The receiver can recover the data without SI by using the virtual channel estimated with pilot signals. It is shown by simulation that the proposed SLM has PAPR reduction and BER performances similar to the previous SLM schemes while it can reduce implementation complexity substantially.

• Journal of Internet Computing and Services
• /
• v.4 no.3
• /
• pp.47-55
• /
• 2003

Multicast protocols ore developed in order to support group communications efficiently, However. there still exist some issues to be solved for deploy multicast protocol in the public internet. This paper refers problem of existing Reliable Multicast Protocols and redesigns component function, and proposes enhanced reliable multicast transport protocol, This paper proposed a improved multicast transport scheme in NACK based reliable multicast. This scheme is much faster than by sender-initiated or receiver-initiated recovery and latency is smaller. Designed components are implemented in UNIX environment using C programming longuage. Then the protocol was evaluated performance through simulation. As the result, proposed protocol is better than existing protocols in both of transmission delay and packet loss. Especially, proposed protocol in this paper con be used in multicast services needed high reliability.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.125-132
• /
• 2007

Transmission mechanisms that include an available bandwidth estimation algorithm and a packet loss differentiation scheme, in general, exhibit higher TCP performance in wireless networks. TCP New Jersey, known as the best existing scheme in terms of goodput, improves wireless TCP performance using the available bandwidth estimation at the sender and the congestion warning at intermediate routers. Although TCP New Jersey achieves 17% and 85% improvements in goodput over TCP Westwood and TCP Reno, respectively, we further improve TCP New Jersey by exploring improved available bandwidth estimation, retransmission timeout, and recovery mechanisms. Hence, we propose TCP New Jersey PLUS (shortly TCP NJ+), showing that under 1% packet loss rate, it outperforms 3% by TCP New Jersey and 5% by TCP Wes1wood. In 5% packet loss rate, a characteristic of high bit-error-rate wireless network, it outperforms other TCP variants by 19% to 104% in terms of goodput even when the network is in bi-directional congestion.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.214-222
• /
• 2015

The superiority of gallium nitride FET (GaN FET) over silicon MOSFET is examined in this paper. One of the outstanding features of GaN FET is low reverse-recovery charge, which enables continuous conduction mode operation of totem-pole bridgeless boost power factor correction (PFC) circuit. Among many bridgeless topologies, totem-pole bridgeless shows high efficiency and low conducted electromagnetic interference performance, with low cost and simple control scheme. The operation principle, control scheme, and circuit implementation of the proposed topology are provided. The converter is driven in two-module interleaved topology to operate at a power level of 5.5 kW, whereas phase-shedding control is adopted for light load efficiency improvement. Negative bias circuit is used in gate drivers to avoid the shoot-through induced by high speed switching. The superiority of GaN FET is verified by constructing a 5.5 kW prototype of two-module interleaved totem-pole bridgeless boost PFC converter. The experiment results show the highest efficiency of 98.7% at 1.6 kW load and an efficiency of 97.7% at the rated load.