• 한국전산구조공학회논문집
• /
• 제29권5호
• /
• pp.405-411
• /
• 2016

본 논문에서는 풍력 블레이드와 같이 세장비가 크고 초기 비틀림이 존재하는 복합재료로 구성된 블레이드에 대한 이차원 단면의 차원축소와 복원관계를 이론적으로 기술하였다. 그리고 VABS 이용한 보의 차원축소모델에 대한 유효성을 검증하기 위해 선행연구 모델을 활용하여 기존 연구결과를 수치적으로 비교하였다. 실물과 가장 가까운 날개 구조물 2차원 형상에 단면해석을 적용하여 정밀한 단면의 이산화를 수행하고 VABS를 이용하여 블레이드의 특성(질량행렬, 강성행렬)을 포함한 1차원 보 모델링을 수행하였다. 1차원 보 모델을 통해 세장비가 큰 날개 구조물의 거동을 확인하고 내부하중을 계산하여 단면위치에서 변형률 복원을 수치적으로 계산하고 이산화된 단면에 수치적으로 매핑하여 시각적으로 확인하고 여유마진을 계산하였다.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.615-620
• /
• 2018

In order to analyze the healing effectiveness of rock salt cracks affected by the applied stresses and time, we used the ultrasonic technology to monitor the ultrasonic pulse velocity (UPV) variations for different initial stress-damaged rock salts during self-healing experiments. The self-healing experiments were to create different conditions to improve the microcracks closure or recrystallized, which the self-healing effect of damaged salt specimens were analyzed during the recovery period about 30 days. We found that: The ultrasonic pulse velocity of the damaged rock salts increases rapidly during the first 9 days recovery, and the values gradually increase to reach constant values after 30 days. The damaged value and the healed value were identified based on the variation of the wave velocity. The damaged values of the specimens that are subject to higher initial damage stress are still keeping in large after 30 days recovery under the same recovery condition It is interesting that the damage and the healing were not in the linear relationship, and there also existed a damage threshold for salt cracks healing ability. When the damage degree is less than the threshold, the self-healing ratio of rock salt is increased with the increase in damage degree. However, while the damage degree exceeds the threshold, the self-healing ratio is decreased with the increase in damage.

• Nutrition Research and Practice
• /
• 제9권3호
• /
• pp.268-277
• /
• 2015

BACKGROUND/OBJECTIVES: Although it is crucial to identify those children likely to be treated in an appropriate nutrition rehabilitation programme and discharge them at the appropriate time, there is no golden standard for such identification. The current study examined the appropriateness of using Mid-Upper Arm Circumference for the identification, follow-up and discharge of malnourished children. We also assessed its discrepancy with the Weight-for-Height based diagnosis, the rate of recovery, and the discharge criteria of the children during nutrition rehabilitation. SUBJECTS/METHODS: The study present findings from 156 children (aged 6-59 months) attending a supplementary feeding programme at Makadara and Jericho Health Centres, Eastern District of Nairobi, Kenya. Records of age, weight, height and mid-upper arm circumference were selected at three stages of nutrition rehabilitation: admission, follow-up and discharge. The values obtained were then used to calculate z-scores as defined by WHO Anthro while estimating different diagnostic indices. RESULTS: Mid-upper arm circumference single cut-off (< 12.5 cm) was found to exhibit high values of sensitivity, specificity, positive predictive value, negative predictive value, positive likelihood ratio, negative likelihood ratio at both admission and discharge. Besides, children recorded higher rate of recovery at 86 days, an average increment of 0.98 cm at the rate of 0.14mm/day, and a weight gain of 13.49gm/day, albeit higher in female than their male counterparts. Nevertheless, children admitted on basis of low MUAC had a significantly higher MUAC gain than WH at 0.19mm/day and 0.13mm/day respectively. CONCLUSIONS: Mid-upper arm circumference can be an appropriate tool for identifying malnourished children for admission to nutrition rehabilitation programs. Our results confirm the appropriateness of this tool for monitoring recovery trends and discharging the children thereafter. In principle the tool has potential to minimize nutrition rehabilitation costs, particularly in community therapeutic centres in developing countries.

• 한국방사선학회논문지
• /
• 제8권5호
• /
• pp.271-278
• /
• 2014

상완신경총에서 STIR(short TI inversion recovery) 지방소거 강조영상과 SPAIR(spectral adiabatic inversion recovery) T2, T1 지방소거 강조영상기법을 비교 평가하여 최적의 지방소거 기법을 알아보고자 하였다. 총 30 명 상완신경총에 질환이 없는 정상인 지원자를 대상으로 3.0 T MRI 기기를 이용하여 검사를 하였고, 분석방법으로 세 기법에 대하여 SNR, CNR 및 4단계 점수로 평가를 하였다. 정량적 분석 결과로 SPAIR T1 기법에 대한 SNR, CNR 값은 상완신경총기시부($03.07{\pm}0.98$, $-2.25{\pm}0.54$), 상완신경총몸체($06.70{\pm}1.81$, $36.31{\pm}2.17$)에서 높은 값을 제공하였다 (p<0.05). 정성적 분석결과 상완신경총 묘출도와 지방소거 정도, 영상의 인공물은 SPAIR T1($3.2{\pm}0.70$, $3.6{\pm}0.51$, $3.4{\pm}0.10$)기법이 의미 있게 높게 나타났다(p<0.05).

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.283-292
• /
• 2017

Purpose: Japanese Apricot, a type of plum, has various medicinal and economical applications. Plums are quite popular worldwide, but their deseeding remains a serious impediment to their processing. Therefore, a plum (Japanese Apricot) seed remover (PSR) was developed that can use various types of cutters according to the purpose of the plum processing, and its performance was evaluated. Methods: The proposed PSR, which allows multipurpose cutters, namely, zero-, two-, and four-blade cutters, to be installed, was first designed and manufactured. To identify appropriate parameters related to the cutting pressure, plums were harvested from three regions during three harvesting periods, and their geometrical and mechanical properties were measured. After application of the parameters related to the cutting pressure, a performance test was carried out on both fresh and frozen plums by identifying the ratios of the flesh recovery, seed recovery, seed breakage, deseeding efficiency, and machine efficiency. Results: The results show that, using the proper calculation of the processing parameters, 100% deseeding efficiency was facilitated regardless of the type of cutter used. However, in the case of a four-blade cutter, there are significant differences in the flesh recovery ratio according to the plum setting angle. Between the fresh and frozen plums, all cutters showed a significantly better flesh recovery ratio for the case of fresh plums. Conclusions: This machine will advance the plum processing technology, and eventually help the plum industry flourish.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.394-399
• /
• 2009

The esterification of palmitic acid in Jatropha Oil using 8wt% p-TSA catalyst was done at the 1:8 molar ratio of oil to methanol and $65^{\circ}C$. The conversion of palmitic acid appeared to be 95.3% in 60min. After that, the continuous transesterification of the oil using 0.5wt% KOH, 0.8wt% TMAH mixed catalyst[40vol% KOH(0.5wt%) + 60vol% TMAH(0.8wt%)] and 1.1wt% TMAH was conducted with the flow rates and the molar ratios at $65^{\circ}C$. The overall conversion of Jatropha Oil increased with the decrease of flow rate and showed 95.6% with 9ml/min of flow rate at the 1:8 molar ratio of oil to methanol and $65^{\circ}C$. But it showed 87% with 15ml/min of flow rate at the same conditions. The recovery of methanol(%) appeared to be 86% at the 1:8 molar ratio of oil to methanol, mixed catalyst and $65^{\circ}C$.

• Radiation Oncology Journal
• /
• 제11권1호
• /
• pp.17-27
• /
• 1993

To investigate the relationship between radiosensitivity and postirradiation recovery in human cancer cells, a study was performed using human cancer cell lines-A549, CaSki, SNU-C5 and PCI-13. For the study of radiosensitivity, single doses of 2, 4, 6, 8, 10, 12, and 14 Gy were given and for postirradiation recovery, two fractions of 4 Gy were separated with a time interval of 0, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, or 6 hours. Surviving fraction was estimated using colony forming ability. Surviving fractions at 2 Gy (SF2) were 0.496 (0.570-0.412) for A549, 0.496 (0.660-0.332) for CaSki, 0.386 (0.576-0.216) for SNU-C5, and 0.185 (0.247-0.123) for PCI-13. By statistical analysis the SF2 of PCI-13 was lower significantly than those of others (p<0.05). This difference was also observed at 4, 6 and 8 Gy dose levels. At 6 and 8 Gy the surviving fractions of SNU-C5 were also lower significantly than A549 and CaSki (p<0.05). By the analysis with linear quadratic model, the values of ${\alpha}$ for A549, CaSki, SNU-C5 and PCI-13 were 0.3016, 0.3212, 0.4327 and 0.8423, respectively, and those of ${\beta}$ were 0.02429, 0.02009, 0.03349 and 0.00059, respectively. So, the value of ${\alpha}$ showed increasing tendency with decreasing SF2. By the multitarget single hit model the values of Do for A549, CaSki, SUN-C5 and PCI-13 were 1.97, 1.97, 1.46 and 0.81, respectively, and those of n were 1.53, 1.50, 1.56 and 2.28, respectively. So, the value of Do decreased with decreasing SF2. Post-irradiation recovery reached plateau at around 2 hours. Recovery ratio at plateau phase ranged from 1.2 to 4.2; the value were 1.2 for PCI-13, 3.2 for CaSki, 3.3 for SNU-C5, and 4.2 for A549. Recovery rate well correlated with SF2, and increased with increasing Do and decreasing ${\alpha}$. According to above results, the intrinsic radiosensitivity was quite different among the tested cell lines; PCI-13 was the most sensitive and A549 and CaSki was similar. This difference of radiosensitivity is thought to be partly due to the difference in amount of postirradiation recovery. By linear quadratic model the difference of ${\alpha}$ values was very high, and by multitarget single hit model the difference of Do value was significantly high among four cell lines.

• 한국산림과학회지
• /
• 제97권5호
• /
• pp.508-515
• /
• 2008

Sycamore (Platanus occidentalis L.) seedlings were grown under low light intensity and ozone treatments to investigate the role of the light environment in their response to chronic ozone stress. One-year-old seedlings of Platanus occidentalis L. were grown in pots for 3 weeks under low light (OL, $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and high light (OH, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) irradiance in combination with 150 ppb of ozone fumigation. After three weeks of ozone and light treatment, seedlings were placed in ozone free clean chamber for 3 weeks for recovery from ozone stress with same light conditions to compare recovery capacity. Ozone fumigation determined an impairment of the photosynthetic process. Reduction of leaf dry weight (14%) and shoo/root ratio (17%) were observed in OH treatment. OL treatment also showed severe reductions in leaf dry weight and shoot/root ratio by 48% and 36% comparing to control, respectively. At the recovery phase, OH-treated plants recovered their biomass, whereas OL-treated plant showed reduction in leaf dry weight (52%) and shoot/root ratio (49%). OH-treated plants reached similar relative growth rate (RGR) comparing to control, whereas OL-treated plants showed lower RGR in stem height. However, there were no significant differences in response to those treatments in stem diameter RGR at the recovery phase. Ozone treatment produced significant reduction of net photosynthesis in both high and low light treatments. Carboxylation efficiency and apparent quantum yield in OL-treated plants showed significant reductions rate to 10% and 45%, respectively. At the recovery stage, ozone exposed seedlings under high light had similar photosynthetic capacity comparing to control plants. Antioxidant enzymes activities such as superoxide dismutase (SOD), ascorbate peroxidase (APX), and glutathione reductase (GR) were increased in ozone fumigated plants only under low light. The present work shows that the physiological changes occur in photosynthesis-related parameters and growth due to ozone and low light stress. Thus, low light seems to enhance the detrimental effects of ozone on growth, photosynthesis, and antioxidant enzyme responses.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권1호
• /
• pp.69-73
• /
• 2001

For developing the cryogenic air separation unit, it requires some technology such as basic process design. equipment design and manufacturing based on the cryogenic physical properties and separation theory. In this study, we developed a process and equipment for producing high purity nitrogen which has the production capacity of 1600N㎥/h under 1 ppm $O_2$ and $H_2O$. Also we found that the number of theoretical plate(NTP) of distillation column was 44 and maximum nitrogen recovery ration of this process was 42% from the process simulation. The performance test was also carried out for the nitrogen recovery ratio and equipment efficiency. The results showed that the optimum nitrogen recovery was 41% and the maximum equipment efficiency was attained.

• 설비공학논문집
• /
• 제12권9호
• /
• pp.853-859
• /
• 2000

In this study, low temperature waste heat recovery heat exchanger was developed using a principle of self-excited oscillating heat pipe. The heat exchanger of serpentine type was composed of extruded flat aluminum tube with 6 channels (3 nm$\times$ 2.75nm) and louvered fin. The heat transfer area density of heat exchanger was $331.9 m^2/m^3$. Working fluid is R141b and charge ratio was 40% by volume. Heat transfer rate and the effectiveness of heat exchanger was primary concern of this study. As a result, the effectiveness of heat exchanger was about 0.4-0.67, and recovered waste heat rate was about 4.5 kW per one unit of heat exchanger.