• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.492-495
• /
• 2000

In order to develop an ultra-thin CoCr perpendicular magnetic recording layer, we prepared CoCrTa/Ti double layer for perpendicular magnetic recording media by new facing targets sputtering system, Crystallgraphics and magnetic characteristics of CoCrTa on underlayer substrate temperature have been investigated. Crystallgraphic and magnetic characteristic of thin films were evaluated by X-ray diffractometry(XRD), vibrating sample magnetometer(VSM) and atomic force microscopy(AFM). The coercivity and anisotropy field was increased by increasing under layer substrate temperature, c-axis orientation of CoCrTa magnetic recording layer was improved 8$^{\circ}$ to 5.6$^{\circ}$when under layer substrate temperature was 250[$^{\circ}C$]. Also, through annealing effect for CoCrTa/Ti double layer, it was certain that crystallgraphics and magnetic characteristics was improved.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.58-66
• /
• 2005

Pseudo-Near Field Recording (Pseudo-NFR) system is proposed to prevent contamination and oxidation of media surface occurred in conventional NFR systems. To solve these critical problems of the NFR systems, we investigate the optimal thickness of cover layer for Pseudo NFR. This paper presents the theoretical analysis for cover layer thickness based on the measured length of dust particle and numerical simulation for the temperature distribution using Finite Difference Time Domain (FDTD) method and heat conduction equation. To verify the simulation results, we conduct and compare simulation results in case of far field MO recording and near field MO recording. A measured dust particle length in general environment was mostly less than $20{\mu}m$, and the optimal thickness of cover layer is $30{\mu}m$ in this case. Based on the designed optimal cover layer thickness, temperature distribution is simulated to have $800{\~}850^{\circ}C$.

• 한국자기학회지
• /
• 제16권2호
• /
• pp.149-156
• /
• 2006

자기 기록 시스템은 시간의 흐름에 따라 기록 밀도는 높아지고 있고 또한 기록 속도 역시 빨라지고 있다. 더욱 빠른 기록 속도의 요구 치로 인하여 자기 기록 헤드에 인가되어지는 기록 주파수 역시 높아져야 하고 또한 기록이 일어나는 기록 미디어의 회전 속도 역시 빨라져야 한다. 이와 같은 두 가지 요건은 헤드와 기록 미디어에서 와전류를 발생시키게 된다. 기록 헤드에서는 기록 주파수에 의해 발생되는 와전류가 존재한다. 그리고 기록 미디어에서는 기록 주파수에 의해 발생되는 와전류와 회전하는 미디어의 선속도에 의해 발생하는 와전류가 존재하게 된다. 본 논문에서는 비선형 3차원 유한 요소법을 이용하여 자기 기록 헤드에서 발생하는 와전류와 기록 미디어에서 발생하는 두 종류의 와전류의 분포를 분석하고 이와 같이 발생한 와전류가 자기 기록시스템에서 자기 기록 필드에 미치는 영향에 대해서 연구하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.558-563
• /
• 1995

Dynamic characteristics of TbFeCo magneto-optical recording media at 680nm wavelength region were studied by means of computer simulation of disc structure and optimization of process variables during sputter deposition. With the slightly reduced Kerr rotation angle due to the reduced wavelength of optical laser source, the improved recording density in TbFeCo magneto optical media showing the CNR greater than 50dB could be achieved by only adjusting the thickness of dielectric and the recording layers when the wavelength of light source is changed from 780nm to 680nm. In addition, the recording power margin of 5mW and the 2mW minimum recording power was realized, It was shown from the present study that the increase in laser power density demonstrated feasibility of low cost and low power laser diode with the reduced optimum recording power.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.6-8
• /
• 2002

In order to prepare magnetic recording layer with a good quality crystallographic characteristic. We prepared $Co_{77}Cr_{20}Ta_3$ layer for perpendicular magnetic recording media on slide glass substrate by Two-Step Methode. The thickness of magnetic layer was fixed 100 nm and buffer layer were varied from 10 to 50 nm, and input current was varied from 0.2[A] to 0.5[A]. The surface morphology and crystal orientation of the CoCrTa films were examined with XRD. Prepared thin films showed improvement of dispersion angle of c-axis orientation ${\Delta}{\theta}_{50}$ caused by inserting buffer layer.

• 한국자기학회지
• /
• 제14권2호
• /
• pp.65-70
• /
• 2004

도메인 확장형 광자기 디스크 시스템(magnetic amplifing magnetooptical system; MAMMOS)의 기록마크 시뮬레이션을 위한 온도분포와 재생신호를 연구하였다. 정지된 디스크에서 레이저 빔에 의한 기록층과 이웃하는 층들의 온도 분포를 계산하였으며, 마크 크기와 길이 및 위치를 계산하였다. 또한 마크 모양에 따른 재생신호의 크기, 기록층에 기록되는 마크의 재생신호 및 판독층에서 확대된 재생신호를 시뮬레이션 하였다. 간소화된 열전달 특성 모델을 계산함으로써, 기록층과 인접한 층에서의 온도분포를 시간의 함수로 계산하였다. 마크 크기는 디스크가 회전할 때 기록 빔 펄스 파형에 의한 온도분포로부터 계산하였으며, 기록빔 펄스 파형으로부터 디스크의 온도분포를 이용하여 마크의 길이와 위치를 계산하였다. 재생신호는 디스크의 반사도 패턴과 가우시안 빔의 컨볼루션 연산을 이용하여 계산하였다. 판독층에서 빔 크기만큼 확대된 도메인의 재생신호가 기록층에서의 초승달 모양 마크에 기한 재생신호보다 2배 이상 증가되는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.77-80
• /
• 2001

Crystallographic and magnetic characteristics of CoCr-based magnetic thin film for perpendicular magnetic recording media were influenced on preparing conditions. In these, there is that substrate temperature was parameter that increases perpendicular coercivity of CoCrTa magnetic layer using recording layer. While preparation of CoCr-based doublelayer, by optimizing substrate temperature, we expect to increase perpendicular anisotropy of CoCr magnetic layer and prepare ferromagnetic recording layer with a good quality by epitaxial growth. CoCrTa/Si doublelayer showed a good dispersion angle of c-axis orientation $\Delta\theta_{50}$ caused by inserting amorphous Si underlayer which prepared at underlayer substrate temperature 250C. Perpendicular coercivity was constant, in-plane coercivity was controlled a low value about 200Oe. This result implied that Si underlayer could restrain growth of initial layer of CoCrTa thin film, which showed bad magnetic properties effectively without participating magnetization patterns of magnetic layer. In case of CoCrTa/Si that prepared with ultra thin underlayer, crystalline orientation of CoCrTa was improved rather underlayer thickness 1nm, it was expected that amorphous Si layer played a important role in not only underlayer but also seed layer.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.185-189
• /
• 2005

We reported here nano-scale electrical phase-change recording in amorphous $Ge_2Sb_2Te_5$ media using an atomic force microscope (AFM) having conducting probes. In recording process, a pulse voltage is applied to the conductive probe that touches the media surface to change locally the electrical resistivity of a film. However, in contact operation, tip/media wear and contamination could major obstacles, which degraded SNR, reproducibility, and lifetime. In order to overcome tip/media wear and contamination in contact mode operation, we adopted the W incorporated diamond-like carbon (W-DLC) films as a protective layer. Optimized mutilayer media were prepared by a hybrid deposition system of PECVD and RF magnetron sputtering. When suitable electrical pulses were applied to media through the conducting probe, it was observed that data bits as small as 25 nm in diameter have been written and read with good reproducibility, which corresponds to a data density of $1 Tbit/inch^2$. We concluded that stable electrical phase-change recording was possible mainly due to W-DLC layer, which played a role not only capping layer but also resistive layer.

• 한국실천공학교육학회논문지
• /
• 제4권2호
• /
• pp.84-90
• /
• 2012

화학분석 설계의 한 사례로서 디지털 기록매체 중 하나인 CD-R (Compact Disc Recordable) 기록층의 단면구조와 기록층의 주요성분인 염료의 구성성분 및 화학구조를 분석하기 위해 분석계획을 수립하고 분석을 수행하는 전 과정을 기술하였다. 미지시료의 화학분석은 많은 경험과 지식을 요하는 복잡한 과정이기 때문에 학생들이 화학분석을 위한 설계 절차를 수립하고 분석방법의 선택이나 자료해석 등에 어려움을 겪고 있어 이해를 돕기 위한 사례로서 CD-R 개발단계에서 실제로 수행했던 한 제품분석의 전 과정을 제시하였다. 본 연구에서는 SEM을 사용하여 CD-R의 substrate (기판) 및 기록층 (Dye 층)의 단면적 구조를 확인하였다, 기록층인 염료는 적절한 용매를 이용하여 용해 수집한 후 TLC (얇은 막 크로마토그래피)를 이용해 성분별로 분리하였다. 분리된 각 성분을 UV-Vis 흡수분광법으로 흡광도를 측정하여 정량하였고, GC-MS와 NMR을 이용해 각 성분의 화학구조를 분석하고 질량분석법을 통해 최종적으로 질량을 확인하였다.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.48-52
• /
• 2005

The research topic of super-RENS technology is shifting from the signal intensity (CNR; Carrier to Noise Ratio) to the signal uniformity (Jitter or bER). To achieve an uniform signal characteristics, it is important to reduce signal fluctuation in a super-RENS disc. In this study, we investigated the relation between signal fluctuation and low frequency noise (LFN), and analyzed LFN increase in recording and readout processes. It was found that signal fluctuation had a close relationship with the LFN. Also, it was found that the recorded mark shape such a bubble type and high readout power increased the LFN in recording and readout process of a super-RENS disc. So, using non-bubble type recording material and low super-resolution readout material, we markedly improved the LFN in a super-RENS disc.