• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1345-1354
• /
• 2019

Clogging of sump strainers that filter the recirculation water in containment after a loss-of-coolant accident (LOCA) seriously impedes the continued cooling of nuclear reactor cores. In experiments examining the corrosion of aluminium alloy 6061, a common material in containment equipment, in borated solutions simulating the water chemistry of sump water after a LOCA, we found that Fe-bearing intermetallic particles, which were initially buried in the Al matrix, were progressively exposed as corrosion continued. Their cathodic nature $vis-{\grave{a}}-vis$ the Al matrix provoked continuous trenching around them until they were finally released into the test solution. Such particles released from Al alloy components in a reactor containment after a LOCA will be transported to the sump entrance with the recirculation flow and trapped by the debris bed that typically forms on the strainer surface, potentially aggravating strainer clogging. These Fe-bearing intermetallic particles, many of which had a rod or thin strip-like geometry, were identified to be mainly the cubic phase ${\alpha}_c-Al(Fe,Mn)Si$ with an average size of about $2.15{\mu}m$; 11.5 g of particles with a volume of about $3.2cm^3$ would be released with the dissolution of every 1 kg 6061 aluminium alloy.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.779-780
• /
• 2005

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4003-4013
• /
• 2021

During the long-term cooling (LTC) phase of a loss-of-coolant accident (LOCA) in a pressurized water reactor (PWR), water is supplied from the containment sump to the reactor coolant system (RCS) by the flooded sump water to the Reactor Vessel (RV) through the broken pipes. As part of the technical efforts for resolving GSI-191 [( Reid and Crytzer, May. 2007) 1, consideration is needed for the consequences of debris penetrating the sump screen and propagating downstream into the RV. Injection of debris (fiberglass) into the RV during the LTC recirculation phase needs special attention to assure that reactor core cooling is maintained. The point of concern is the potential for debris to adversely affect the reactor core flow paths or heat transfer [2]. However, all the experiments for proving the coolability of RV have been done with the assumption of the most of debris would be transferred to the RV and the bottom nozzle of the FAs. The purpose of the tests is to quantify the amount of the debris that would be accumulated at the lower plenum and the debris that passes through the FAs since non-conservatism of other researches assumptions that have been used in the past experimental or analytical programs.

• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.255-262
• /
• 2011

원자력발전소에 냉각재상실사고 발생 시 보온재 파편 등 이물질이 발생하여 방출된 냉각재를 따라 재순환 집수조에 흘러갈 수 있다. 이물질들이 펌프 흡입구에 축적되면 냉각수 흡입을 방해함으로써 원자력발전소 안전에 위협이 될 수 있다. NEI 04-07 및 USNRC 의 평가보고서가 이물질이동분율 평가에 대한 방법론을 제공하였지만 각 원자력발전소 고유특성을 반영한 추가적인 연구가 필요하다. 본 연구에서는 전산유체역학 코드를 사용한 원자력발전소 파단방출이동 해석 방법론을 수립하고 해석을 수행하였다. 해석 결과, 소형 이물질의 32%가 원자로건물 상부로 이동하였다. 이는 NEI 04-07 의 기본해석결과보다 7% 많은 양이다. 본 연구결과는 향후 수행될 이물질이동에 대한 해석적 연구에 중요한 참고자료가 될 것으로 판단된다.

• 에너지공학
• /
• 제23권3호
• /
• pp.186-190
• /
• 2014

원자력발전소는 냉각재상실사고(LOCA)와 같은 과도상태시 pH 조절을 통해 격납건물의 핵분열생성물(요오드) 제거 능력을 유지한다. 이와 더불어 격납건물 내부의 스테인레스강 기기들의 응력부식균열(Stress Corrosion Cracking)을 방지하고 알루미늄 또는 아연 부식에 의한 수소생성을 최소화할 수 있기 때문에 살수 및 집수조냉각수의 화학조건(pH) 조절능력이 요구된다. 현재 원전은 LOCA시 능동형 살수첨가제인 NaOH를 사용하여 격납건물 살수 및 집수조냉각수의 pH를 조절하도록 설계되어있다. 본 논문에서는 LOCA시 집수조냉각수의 pH를 분석하고, 살수화학조건 pH 관련 최신규제요건인 표준심사지침(SRP) 6.5.2에 따라 핵분열생성물제거상수 및 제염계수를 계산하였다. 분석결과, 격납건물집수조 pH는 8.09~9.67로서 설계기준을 만족한다. 그리고 격납건물살수계통에 의한 핵분열생성물 제거상수 및 제염계수는 원전 내환경기기검증을 위한 방사선환경 평가의 입력으로 제공된다.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.129-138
• /
• 2022

A new method for injecting cooling water into the Korean research reactor (KRR) in the event of beam tube rupture is proposed in this paper. Moreover, the research evaluates the risk to the reactor core in terms of core damage frequency (CDF). The proposed method maintains the cooling water in the chimney at a certain level in the tank to prevent nuclear fuel damage solely by gravitational coolant feeding from the emergency water supply system (EWSS). This technique does not require sump recirculation operations described in the current procedure for resolving beam tube accidents. The reduction in the risk to the core in the event of beam tube rupture that can be achieved by the proposed change in the cooling water injection design is quantified as follows. 1) The total CDF of the KRR for the proposed design change is approximately 4.17E-06/yr, which is 8.4% lower than the CDF of the current design (4.55E-06/yr). 2) The CDF for beam tube rupture is 7.10E-08/yr, which represents an 84.1% decrease compared with that of the current design (4.49E-07/yr). In addition to this quantitative reduction in risk, the modified cooling water injection design maintains a supply of pure coolant to the EWSS tank. This means that the reactor does not require decontamination after an accident. Thermal hydraulic analysis proves that the water level in the reactor pool does not cause damage to the nuclear fuel cladding after beam tube rupture. This is because the amount of water in the chimney can be regulated by the EWSS function. The EWSS supplies emergency water to the reactor core to compensate for the evaporation of coolant in the core, thus allowing water to cover the fuel assemblies in the reactor core over a sufficient amount of time.