• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.225-230
• /
• 2004

Volatile organic compounds (VOCs) are low calorific value gases (LCVG) emitted from chemical processes such as painting booth, dye works and drying processes etc. Characteristics of VOCs are low calorific values less than 150 kcal/$m^3$, high activation energy for ignition and low energy output. These characteristics usually make combustion unstable and its treatment processes needs high-energy consumption, The cyclone combustion system is suitable for LCVG burning because it can recirculate energy through a high swirling flow to supply the activation energy for ignition, increases energy density to make a combustion temperature higher than usual swirl combustor and also increases mixing intensity, This research was conducted to develop optimized cyclone combustion system for thermal oxidation of VOCs. This research was executed to establish the effect of swirl number with respect to the combustion temperature and composition of exhausted gas in the specific combustor design.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.135-137
• /
• 2014

Excess enthalpy flame propagating an porous inert medium, which recirculate exhaust heat to the upstream cold mixture, is theoretically analyzed. Using the activation-energy asymptotics, the flame structure is divided into the thin reaction and the gas-phase preheat zone, as is traditionally done. Ahead and behind of the two, there exist an outer preheat zone, where heat is convectively transferred from solid to gas, and a downstream re-equilibrium zone, where thermal equilibrium between phases is established. Asymptotic solutions of species and energy equations in each zone are obtained and then matched to each other, and finally the mass burning rate is obtained as a function of the flame propagation velocity with respect to the solid phase and physical properties of gas and solid.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.37-41
• /
• 2012

Usually compound dies are used in clinch washer production. However, in this study, a fine blanking die is designed and manufactured, and clinch washers are produced by the die. Clinch washers are for electric exhaust gas recirculation (EEGR) and they recirculate some of exhaust gas to reduce harmful substances. Fine blanking automation production eliminates difficulties operators face on conventional press.

• 동력기계공학회지
• /
• 제10권2호
• /
• pp.68-74
• /
• 2006

In the development of new automobiles, the efforts to reduce environmental problems like air pollution have been risen. Blowby gas consists of about $20{\sim}35%$ of total amount of Hydrocarbon (HC), one of dangerous pollutants issuing from automobiles. A PCV valve is a very small component in an automotive engine but it is a very important part. Because that a PCV valve is used to control blowby gas and to recirculate it into a manifold automatically. Although it has very simple operating principle, designing a PCV valve is so difficult due to interaction between fluid and solid. In this study, our purpose is to develop a design program for a PCV valve and to verify its efficiency. Both Bernoulli equation and 4th order Runge-Kutta method were adopted to predict spool displacements and flow patterns. Comparing with experiments, it was found that both spool diameters and displacements were predicted well, however, flow rates showed a little differences because of the assumption of non viscous flow.

• 대한핵의학회지
• /
• 제32권2호
• /
• pp.168-171
• /
• 1998

We present a case in which a patient with acute hemorrhagic gastritis demonstrated abnormal gastrointestinal accumulation of radiotracer during $^{99m}Tc$-methylene diphosphonate(MDP) skeletal scintigraphy. A hemorrhagic gastritis was subsequently demonstrated by endoscopy. The mechanism for the intestinal localization of $^{99m}Tc$-MDP in this patient is not clear, but we guess that the extravasated blood containing the radiopharmaceutical cannot recirculate and stays at the bleeding site, so we can see the intestinal activity.

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.6-11
• /
• 2015

An active flow control technique using blowing and distributed suction on low Reynolds airfoil is investigated. Simultaneous blowing and distributed suction can recirculate the jet flow mass, and reduce the penalty to propulsion system due to avoiding dumping the jet mass flow. Energy is injected into main flow by blowing on the suction surface, and the low energy boundary flow mass is removed by distributed suction, thus the flow separation can be successfully suppressed. Aerodynamic lift to drag ratio is improved significantly using the flow control technique, and the energy consumption is quite low.

• 에너지공학
• /
• 제13권2호
• /
• pp.112-117
• /
• 2004

휘발성 유기물질은 도장공정, 염색, 건조공정 등 화학공정에서 발생하는 저발열량 가스이다 VOCs의 특징은 발열량이 150kcal/㎥ 이하이며 착화를 위한 활성화 에너지가 높고 발생 에너지가 낮다는 것이다. 따라서 연소 안정성은 낮아지고 처리공정은 고에너지 소비공정이 된다. Cyclone연소시스템은 연소기 내에 강한 선회 유동을 만들어서 에너지를 순환시켜 활성화에너지를 낮추어주고 열밀도가 높아 일반적인 swirl 연소 시스템에 비해 고온의 연소온도를 유지할 수 있으며 혼합성을 향상시킨다 본 논문에서는 휘발성 유기물질의 열산화를 위해 최적의 cyclone 연소시스템을 개발하는 것을 목적으로 수행되었으며 특별히 설계된 연소기에서 연소온도와 배가스 조성에 미치는 swirl number의 영향을 정립하였다.

• 한국추진공학회지
• /
• 제19권1호
• /
• pp.42-49
• /
• 2015

3차원 Large Eddy Simulation(LES)와 Proper Orthogonal Decomposition(POD) 기법을 이용하여 고체로켓의 인히비터에서 발생하는 연소실내 압력 진동 특성을 분석하였다. 인히비터 후방에서 발생한 와류는 Flow-acoustic coupling에 의해 주기적으로 반복하여 생성, 소멸이 이루어지는 것을 확인하였고, 이 와류가 내삽 노즐 입구 도출부에 충돌하면서 유동이 불균질하게 분해되고, 후방 돔으로 유입된 유동에 의한 압력 진동은 연소실 압력 진동 가진의 원인이 된다. 또한 인히비터에서 발생하는 와흘림(vortex shedding) 주기는 연소실내 와류 발생 주기와 일치하며, 실험에서 측정된 압력 진동 주파수와 비교 분석하였다.

• 설비공학논문집
• /
• 제19권12호
• /
• pp.857-864
• /
• 2007

In the current residential building, hot water supply system consumes the second largest energy in order to make the thermal comport condition of residential space. The more residential environment improves the more the demand for hot water and water consumption is increasing gradually. So this study examines the possibility of applying the recirculation for individual hot water supply system compared with the existing method for waiting time for hot water, wasted water and energy consumption. The results are as follows. (1) In case of recirculation system method the waiting time for hot water can be reduced up to $69\sim85%$ in spring and fall period and so dose up to $77\sim85%$ in winter period. (2) The total wasted water has a little change compared with the existing method which can make the total wasted water reduced about $77\sim86%$. (3) The efficiency of hot water supply system can be improved, if the method which blocks the inflow of cold water is applied, when return pump is operated to recirculate hot water in recirculation system.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3183-3193
• /
• 2023

The water radiolysis in-core at light water reactors (LWRs) produces various radicals with other ionic species/molecules and radioactive nitrogen species in the reactor coolant. Nitrogen species can exist in many different chemical forms and recirculate in water and steam, and consequently contribute to what extent the environmental safety at nuclear power plants. Therefore, a clear understanding of formation kinetics and chemical behaviors of nitrogen species under irradiation is crucial for better insight into the characteristics of major radioactive species released to the main steam or relevant coolant systems and eventually development of advanced processes/methodologies to enhance the environmental safety at nuclear power plants. This paper thus focuses on basic principles on electrochemical interaction kinetics of radiolytic molecules and various nitrogen species in high temperature water, fundamental approaches for calculating thermodynamic values to predict their stability and domain in LWRs, and the effect of nitrogen species on crevice chemistry/corrosion and intergranular stress corrosion cracking (IGSCC) susceptibility of structure materials in high temperature water.