• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.123-130
• /
• 2006

Airport facility is infrastructure that become external credit worthiness and linear measure of country competitive power. Among them, an airport electric power receiving and distribution facility is very important. In this paper, sorted domestic airline as 4 grades by code to accomplish standardization for airport electric power receiving and distribution facility. And established define and coverage about electric power receiving and distribution facility. And then analyze problem of existing airport and presents standardization. Finally, present standard single-line diagram by airport grade and system grade standard of airport electric power receiving and distribution facility

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.455-463
• /
• 2022

This study proposes a receiving pad identification coil for wireless charging of electric vehicles. The proposed coil identifies the shape of the receiving pad through magnetic coupling with the receiving pad. Therefore, the shape of the coil is designed to show the different magnetic properties of each receiving pad. The accuracy of this design is verified through finite element method simulation. Furthermore, the operation method of the secondary pad identification circuit is described, and the appropriate magnitude and length of the pulse voltage applied to this circuit for receiving pad identification are derived through simulation. The performance of the proposed identification coil set is verified by the experimental results.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1621-1628
• /
• 2016

Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.2
• /
• pp.78-83
• /
• 2019

In this study, we analyze the structure of the transceiver coil in the inductive power transfer (IPT) system. In the IPT system, the transceiver coil design needs to have the highest magnetic coupling possible because of the relatively low magnetic coupling due to the large gap of distance without the core. The transmitting coil may be formed as a multi-layer type according to the distance between the transmitting and receiving coils if the receiving coil is configured as a multi-layer type on the inner structure of the receiving apparatus, thereby improving the magnetic coupling and system efficiency. We compare and analyze the coil magnetic coupling, and system efficiency according to the layer structure of the transmitting and receiving coils and verify the analysis by JMAG simulation. Experimental results show that the layer structure of the transceiver should be considered according to the inner space of the receiving device and the spacing distance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.776-779
• /
• 2014

In this paper, we analyzed the efficiency of magnetic resonance wireless power transmission (WPT) using superconductor coil according to the changing position of transmission and receiving coils. We implemented a WPT system using a magnetic resonance at a frequency of 63.1 kHz. Transmission and receiving coils using superconductor coil were wound on a spiral manner of diameter 100mm. For comparison, transmission and receiving coils using normal conductor coil were designed under the same condition. At a distance of 50mm, we measured efficiency when transmission-receiving coils were matched 25%, 50%, 75% and 100%. When a superconductor coil was applied to the transmission and receiving units, efficiency of WPT was very high. In addition, in the case of the superconducting transmission-receiving coils, when coils matched 100% the efficiency was 30% and matched 25% the efficiency was 8%.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.133-136
• /
• 2000

Generally in the case of mobil communication service for long distance sea, unlike heavily populated residential areas, providers need to minimize the service area per base station. Therefore, in this thesis, the 800 ㎒ CDMA system should be extended to give better long distance communication service. This model is used to predict the occurring receiving power of the mobile stations that we simulated and analyzed. As a result, the experiment demonstrated the appropriateness of predicting receiving power using this model.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.78-87
• /
• 1996

in urban cross-roads with dense buildings, receiving power and delay spread were computed when doing these, we were able to develope codes to be executed in a very fast time by combining image method and algorithm for propagation paths compairing with ray launching technique. And receiving power and delay spread could be viewed in 3-dimensional picture by virtue of computing electric fields in arbitrary receiving point. For numerical computation, receiving power of wide and anrrow band and delay spread were computed, and extension method of ray numbers was facilitated for handling infinite number of rays.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.187-190
• /
• 2008

This paper presents two dimensional receiving coils to provide hundreds of milli-watt power via inductive link to in vivo robotic capsules, whose orientation are practically undetermined. The wireless power transmission system consists of a transmitter powered by class E power amplifier, and a receiver with three dimensional antenna, rectifier, and voltage regulator. As the 2D lateral antenna construction is more critical for the receiving antenna, two types of 2D antennas are introduced and evaluated by theoretic and experimental analyses. Experimental results verifies that the cross-type construction show better directional performance for receiving power than the cylindrical one for the 2D antenna. The former could deliver the power homogeneously regardless of its orientation, with less than 20 % of variation from the possible maximum power.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.224-230
• /
• 2010

Wireless power transmission (WPT) is useful technology in near future. There are some kinds of the WPT technologies, WPT via radio waves, resonance coupling, and inductive. Especially the WPT via radio waves is used for multi-purposes from short range to long range application. However, unfortunately it is misunderstood that it is low efficiency and low power. In this paper, I show the theory of beam efficiency between transmitting antennas and receiving antennas and also show some high efficient applications of the WPT via radio waves. Especially, I pick up a wireless power charging system of an electric vehicle and show the experimental results. I show difference between the theory of beam efficiency and the experimental results of short range WPT. I indicate that reasons of poor beam efficiency in the experiment are (1) change of impedance caused by mutual coupling between transmitting antennas and receiving antennas, (2) oblique direction of microwave power to receiving antennas caused by short distance.

• Current Optics and Photonics
• /
• v.7 no.1
• /
• pp.1-14
• /
• 2023

Wavefront-coding imaging can achieve high-quality imaging along with a wide range of defocus. In this paper, the anti-laser detection and damage performance of wavefront-coding imaging systems using different asymmetric phase masks are studied, through modeling and simulation. Based on FresnelKirchhoff diffraction theory, the laser-propagation model of the wavefront-coding imaging system is established. The model uses defocus distance rather than wave aberration to characterize the degree of defocus of an imaging system. Then, based on a given defocus range, an optimization method based on Fisher information is used to determine the optimal phase-mask parameters. Finally, the anti-laser detection and damage performance of asymmetric phase masks at different defocus distances and propagation distances are simulated and analyzed. When studying the influence of defocus distance, compared to conventional imaging, the maximum single-pixel receiving power and echo-detection receiving power of asymmetric phase masks are reduced by about one and two orders of magnitude respectively. When exploring the influence of propagation distance, the maximum single-pixel receiving power of asymmetric phase masks decreases by about one order of magnitude and remains stable, and the echodetection receiving power gradually decreases with increasing propagation distance, until it approaches zero.