• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.681-687
• /
• 2017

This paper presents about an implementation of Video Transmitting and Receiving System(VTRS) for acquiring test data. The VTRS consists of two parts. The first is Transmitter Unit(TU) that is installed on a missile to acquire various kinds of data and transmit the data to the ground through RF signals. The second is Receiver Unit(RU) that receives the transmitted RF signals and reconstruct those to the original data. To gather a high speed data reliably and securely on the ground, the TU is designed by considering data transfer scheme, data compression, modulation method, encryption technic, link budget, and antenna radiation pattern. Further, a placement method of multiple receiving stations is suggested. The VTRS has been tested on a field to check the link margins and maximum receiving distance in a real environment. Finally, the VTRS is applied to a missile flight test and gathered high speed data reliably.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.158-161
• /
• 2010

본 논문에서는 현재 3GPP에서 진행되고 있는 차세대 이동통신 기술 표준, 즉 LTE 시스템의 하향 링크 전송방식의 수신성능을 향상시키기 위해 기지국(BS)과 단말(MS) 사이에 릴레이(RS) 설치를 제안하고, BS의 위치와 설치된 RS의 거리를 각각 500m, 1000m로 하고 RS의 전송방식을 OFDMA와 SC-FDMA를 선택함으로써 수신성능을 높이기 위한 연구를 수행 하였다. 연구결과 RS의 위치가 BS와 가까울수록 RS에서는 SC-FDMA를 사용하는 것이 좋게 나왔고, 반대로 BS와 RS의 거리가 멀어질수록 RS에서는 OFDMA를 사용하는 것의 성능이 좋은 것으로 나왔다. 또한 BS와 MS 거리의 중심지역에서는 그 상황에 맞는 전송방식을 사용함으로써 시스템의 수신성능을 향상시킬 수 있었다.

• 한국항공운항학회지
• /
• 제20권4호
• /
• pp.31-38
• /
• 2012

In this paper, requirements of GNSS receiver station installation are derived for optimizing the performance of network based GNSS precise positioning by concern of international organization(IGS, NGS) recommendation. Also a analysis method of network based GNSS precise positioning is suggested in order to evaluate the availability depending on various network configurations. To evaluate network candidates, a performance evaluation method is proposed for positioning of users according to a geometric configuration and the baseline distance. After the proposed method is used to Ochang region that is a the test area 6 network candidates are derived and the performance of positioning was analyzed. Finally, Ansung, Gongju, Eumsung, Boeun network configuration was selected as the best positioning performance. An optimal Receiving station network was selected using the proposed method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.650-658
• /
• 1998

The pressure level and the insertion loss at the receiving point behind finite length noise barriers are measured in an anechoic room by scale model test. The measured sound pressure level which are conducted under the several experimental conditions such as the length of the noise barrier, the distance between the noise barrier and the receiving point, the number of noise barriers, and the existence of the reflective building behind receiving point) and the insertion loss of a noise barrier having simple shape are well agreed with theoretical calculation which is based on Lam's model.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.224-230
• /
• 2010

Wireless power transmission (WPT) is useful technology in near future. There are some kinds of the WPT technologies, WPT via radio waves, resonance coupling, and inductive. Especially the WPT via radio waves is used for multi-purposes from short range to long range application. However, unfortunately it is misunderstood that it is low efficiency and low power. In this paper, I show the theory of beam efficiency between transmitting antennas and receiving antennas and also show some high efficient applications of the WPT via radio waves. Especially, I pick up a wireless power charging system of an electric vehicle and show the experimental results. I show difference between the theory of beam efficiency and the experimental results of short range WPT. I indicate that reasons of poor beam efficiency in the experiment are (1) change of impedance caused by mutual coupling between transmitting antennas and receiving antennas, (2) oblique direction of microwave power to receiving antennas caused by short distance.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.450-459
• /
• 2015

In this paper, the safety distances and maximum permissible power (MPP) of resonant wireless power transfer systems are defined and derived with regard to human exposure to electromagnetic field (EMF). The definition is based on the calculated induced current density and electric field in the standard human model located between the transmitting and receiving coil. In order to avoid the adverse health effects such as stimulation of nerve tissues, the induced current and electric field must not exceed the basic restriction values specified in EMF safety guidelines. The different combinations of diameters of the coils and the distance between the two coils are investigated and their effects are analyzed. Two versions of EMF safety guidelines (ICNIRP 1998 and ICNIRP 2010) are used as bases for safety distance calculation and the difference between the two guidelines are discussed.

• Transactions on Electrical and Electronic Materials
• /
• 제11권5호
• /
• pp.238-241
• /
• 2010

The purpose of this study is to solve the problems of radio frequency bandwidth frequency depletion, confusion possibilities, and security that are in current wireless communications systems, and to confirm the possibility of applying those solutions for the next generation network. To solve the problems of the current wireless communications system, a visible light communications system for power line communication (PLC) via 8-bit microcontroller is created and the capacity is analyzed. The exclusive PLC chip APLC-485MA, an 8-bit ATmega16 microcontroller, high brightness 5pi light emitting diodes (LEDs), and the LLS08-A1 visible light-receiving sensor were used for the transmitter and receiver. The performance was analyzed using a designed program and an oscilloscope. The voltage change was measured as a function of distance from 10-50 cm. Blue LEDs showed the best performance among the measured LED types, with 0.47 V of voltage loss, but for a distance over 50 cm, precise data was not easy to obtain due to the weak light. To overcome these types of problems, specific values such as the changing conditions and efficiency value relevant to the light emitting parts and the visible light-receiving sensor should be calculated, and continuous study and improvements should also be realized for better communication conditions.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.353-356
• /
• 2015

Due to high oil prices, environmental pollution, the study of electric vehicles have been actively promoted. Charger for the electric vehicle is being developed using wireless rather than cable options. In this paper, we got more efficiency from using a superconducting transmission coil compared to using a normal coil. We implemented a wireless power transmission system using a magnetic induction at a frequency of 63.1 kHz. For comparison, a transmitter was designed using a superconducting coil and a normal coil. In addition, a receiver used a normal coil to apply for electric vehicles. The applied voltage and current were12 V and 5 A. Efficiency at a distance of 40 ~ 80 mm was measured. As a result, the superconducting transmission coil had a higher efficiency than the normal transmission coil. However, the receiving coil should be normal conductor for stable operation considering that it was put in moving electric vehicle. The efficiency was increased to 44 % at a distance of 40 mm when the diameter of normal receiving coil was 120 mm.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1053-1059
• /
• 1996

The pulse-echo response of the piezoceramics PZT-polymer 3-3 type composite transducers with various PVA additions were investigated. The PZT powder was prepared by the molten salt synthesis method. The porous PZT specimens will be used as a filler to make 3-3 type comosite were prepared from a mixture of PZT and polyvinylalcohol(PVA) sphere by utilizing BURPS(Bumout Plastic Sphere) technique. It was shown that the transmitting and receiving sensitivity of 3-3 type piezoelectric composite transducers could be improved than that of solid PZT transducers. The reason is that 3-3 type piezoelectric composite have low dielectric constant, density and acoustic impedance. The distance between transducer and reflector was in good agreement with the distance calculated from the longitudinal velocity of the specimens and receiving time observed pulse-echo responses on the ultrasonic transducer analyzer.

• 한국해양학회지
• /
• 제30권1호
• /
• pp.27-38
• /
• 1995

GPS 측위 방법과 무선 주파수를 응용하여는 연안에서의 해류구조 및 변화에 대한 지속적이고 동시성의 자료를 실시간으로 관측할 수 있는 해류 관측 연구 분야에 적합 한 새로운 장비를 개발하고자 하였다. 본 연구에서는 GPS 위성으로부터 수신한 위치 자료를 재 전송하는 송신 장치(이동 물체: Buoy)와 육상 또는 선박에서 수신하는 수신 기(Receiving system) 및 이를 분석하고 추적하며 처리하는 소프트웨어의 3가지 중요 개발이 이루어 졌다. 특히 시스템 중에서 송신용 및 수신용의 RF Modem은 기존의 유선 방식의 Modem과 달리 무선에서 의 응용으로 해양 자료전송 기술 발전을 가져왔고, 부 표(이동물체)의 위치 추적 소프트웨어는 국내에서 실제로 처음으로 성공한 경우라 할 수 있다. 본 시스템을 기존의 상품화된 표층해류 관측부표(예: 아고스 부표)에 비하여 운용비 및 제작 단가가 저렴하며 실시간 자료 획득이 가능하며 해류관측 뿐만 아니라 각종 해양과 육상에서도 응용이 가능하다.