• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.2
• /
• pp.52-57
• /
• 2015

The purpose of this study was to investigate a relationship between ultraviolet radiation and initial cell density (ICD) of microalgae using a floating marine photobioreactor (PBR). To examine the effect of ultraviolet (UV) radiation in sunlight on biomass productivity as a function of ICD, 0.5-L floating PBRs covered with or without UV cut-off film were placed in an outdoor rectangular tank containing 200 L of water. At the lower ICDs, 0.01 and 0.05 g/L, biomass productivities in the PBRs without UV cut-off film decreased by $278{\pm}21%$ and $222{\pm}3%$ compared with those with the film, respectively. In contrast, the presence of UV cut-off film did not have a significant effect on biomass productivities at the higher ICDs, 0.25 and 1.25 g/L. When the differences in biomass productivity made by the UV cut-off film were plotted against the sum of cell projection area per light receiving area of the PBR, the results revealed that the inhibitory effect of UV on biomass productivity can be negligible when the sum of cell projection area is equal to the light receiving area of the PBR. These results show that photoinhibition caused by UV radiation could be eliminated via operating the PBR with a proper ICD.

• The Journal of Korean Academy of Sensory Integration
• /
• v.2 no.1
• /
• pp.33-42
• /
• 2004

Objective : To evaluate the sensory processing ability in relation to parenting stress and find the sensory modulation areas affecting the parenting stress in disabled children Methods : Parents of 124 children with disabilities between 3 to 7 years receiving occupational therapy in Seoul and Gyeonggi-do made out the questionnaire and in items of questionnaire, Short Sensory Profile and Parenting Stress Index of short form was included. Results : Among general information, parenting stress of parents had significant correlation with the degree of disability and correlation with the lower level 2 of Parenting Stress Index. The more sensory processing disability was increased, the more parenting stress was increased. Parenting stress showed the significant correlation with movement sensitivity area and under-responsiveness/behaivor area seeking specific stimulation among sensory processing areas and had significant correlation with tactile sensitivity and auditory filtering. Sensory processing areas which affect the most the Parenting Stress were movement sensitivity and under-responsiveness/behaivor area seeking the specific behavior among sensory control disabilities. Conclusion : The parenting stress of parents with the disabled children had the correlation with sensory processing ability. The difficulty of sensory processing increased the parenting stress. Hence, in order to improve children's sensory processing ability, the appropriately coping program should be developed and the appropriate intervention for improvement of sensory processing ability of children will be necessary.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.95-107
• /
• 2000

The primary purpose of dredging work is to maintain navigational readiness and to increase environmental amenity, so that the dredging project which is composed of excavating, removing, transporting, storing and disposing dredged material must be carefully managed to insure that dredging works are completed in a cost-effective and environmentally safe manner. The most important point in dumping operations is an estimating and reducing the impacts of discharges at the dumping area. One of the most effective method for the reduction of ecological impacts at dumping area is using the schematic process composed of the sophisticated plan, precise work and predicting/reducing the impacts based on the numerical model and field observation. In this study, the numerical model is used to predict the near-field spatial fate and begavior of effluent discharged from Confined Dumping Facility(CDF) located near coastal area. To to this purpose, reappearing of tidal current was preceded. The model is then applied to Mokpo harbor, where capital dredging and maintenance dredging are conducted simultaneously and the CDF is under construction;. In the series of model case study, we found that the near-field behavior of effluent discharged from CDF was governed by the receiving water condition, outfall geometry, characteristics of efflent and CDF operating conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.257-264
• /
• 1989

For the extension of the flash method the heat diffusion equation with heat loss and with an arbitrary heat pulse is mathematically analyzed. In the analysis the heat loss includes the axial and radial directions on the front, rear and peripheral surfaces. The heat pulse is irradiated from the source to the front surface of the sample and the heat receiving area on the front surface is controlled by the apertures of an optical system. From this analysis the thermal diffusivity of the samples can be determined more precisely than before by the data reduction method using various percent time. The data can be obtained by the extended radial flash technique adjusted correctly the heating area on the central part of the front surface with a proper aperture or the conventional axial flash technique heated uniformly all parts of the front surface.

• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.211-218
• /
• 1991

In this study, the break of the rotary blade which is occured from a stress concentration of the inside of blade by the outside impulsive load, is analyzed to 3-dimension used by the Freezing Photoelastic Method. These results are as follows. 1. The bending and compression stress are the greatest at the location of blade case. 2. The section area of 3cm-location from the blade case is the smallest, therefore, there are breaked 58% of all at this location and are proofed to the most danger section 3. The section area which by stress concentration of 3cm-location from blade case is caused by the production of blade, and it was higher danger of break than another location's. 4. In the location of 6cm and 9cm from the blade case, the bending stress has received a little and the section area has larger than another's, so it is not almost possible that the break at that location 5. In order to prevent of break, the external part which has contacted soil have to made tender for receiving a little stress and the internal part which received a large stress have to strengthen.

• Human Ecology Research
• /
• v.54 no.6
• /
• pp.631-642
• /
• 2016

This study analyzed of the themes (wounding and healing); concerning the Sandplay therapy process applied to children with emotional instability and attention deficit problems. The subjects of the study were 30 elementary school children who agreed to a personal-interview with the author. They all were families of receiving basic livelihood welfare living in the same county. After the preliminary analysis, the main study data collected from subjects was analyzed by variance (t-test), frequency analysis, and correlation analysis using the standard table modified in accordance with Mitchell's classification system. Particular attention was made in the analyses of the characteristics of the subjects as members of low-income families. As the Sandplay therapy proceeded, it became evident that the wounding area showed a low frequency while the healing area featured a high frequency, and confirmed (as in previous studies) that the Sandplay therapy would be effective for children with emotional instability as well as for those with attention deficit problems. The analysis of difference between the types of children with both problems revealed that Sandplay therapy was more effective for children with emotional instability than for those with attention deficit problems. The analysis also revealed that Sandplay therapy was more effective for girls than for boys.

• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.429-439
• /
• 2000

The primary purpose of dredging work is to maintain navigational readiness and to increase environmental amenity. Therefore the dredging project, which is composed of excavating, removing, transporting and storing or dumping dredged material, must be carefully managed to insure that dredging works are completed in a cost-effective and environmentally safe method. The most important point in dumping operations is evaluating and decreasing the impacts of dumping works at the dumping area. One of the most effective method for this purpose is using the schematic process composed of the sophisticate plan, precise work and predicting/reducing the impacts based on an numerical model being closely linked with field observation. In this study, a numerical model is used to predict the spatial transport and fate of the effluent discharged from the confined dumping facility(CDF) located at a coastal area. To achive this purpose, numerical models were used for reappearing the tidal current of concerned area. These models were then applied to Mokpo harbpr where capital dredging and maintenance dredging are being conducted simultaneously and the CDF is under construction. In series of model case study, we found that the effluent discharged from CDF was governed by the receiving water condition and outfall geometry, so that limit of near-field was 14∼500 meter down stream and 4∼150 meter in transverse direction. dilution ranged from 1.1 to 8.2 on the cases. Long-term diffusion characteristics was governed by the dilution rate during near-field behavior, ambient conditions and CDF operation modes.

• New & Renewable Energy
• /
• v.18 no.4
• /
• pp.64-69
• /
• 2022

Double-sided photovoltaic (PV) modules have received significant attention in recent years as a technology that can achieve higher annual energy production rates than single-sided modules. The shingled technology is a promising method for manufacturing high-density and high-power modules. These modules are divided by laser and joined with electrically conductive adhesives. The output efficiency of the divided cells depends on the division pattern and the electrode pattern, making it important to understand the output characteristics. In this study, the output characteristics of large-area double-sided light-receiving shingled cells with different split patterns and electrode patterns were investigated. The M6 size, with 6 divisions in the electrode pattern, had the highest efficiency when using 142 front fingers and 146 rear fingers. The M10 size, with 7 divisions, had the highest output when using 150 fingers equally in the front and rear. The M12 size, also with 7 divisions, showed the highest output characteristics when using 192 front fingers and 208 rear fingers.

• KIEAE Journal
• /
• v.12 no.5
• /
• pp.53-61
• /
• 2012

As aging society progresses, it is necessary to establish a housing standard that provides a healthy, safe, and convenient environment for the elderly. The objective of the study is to propose a housing space standard that is geared towards elderly living in the urban area. Three steps were taken to attain the objective. First, characteristics of housing preference, spatial usage and furniture preference of the elderly were attained through a survey. The survey was conducted targeting the respondents of the ages 60 to 79 living in three different administrative districts in Seoul. Second, the required floor space to perform individual specific behavior using anthropometric dimension of the elderly was investigated by literature review. Lastly, floor space of each space is suggested combining each area for individual specific behavior which reflects characteristics of housing preference and spatial usage. The results of the research as follows. A bedroom was planned, which includes the function of receiving guests by giving the area for the placement of a sofa. The space for the use of dinning table for two person was planned in the kitchen and The space for the behavior of showering on a chair was planned in a bathroom. Lastly, the space for the behavior of taking off shoes on a chair was considered in the entrance area. Consequently, $35.4m^2$ is suggested as the necessary floor space for the elderly housing considering the characteristics of the elderly in urban area. However, because of space composition and space for accessibility, the additional space should be considered to plan the elderly housing.

• Journal of the Korean Dietetic Association
• /
• v.23 no.4
• /
• pp.350-362
• /
• 2017

The study examined evaluated the sanitation management state of the high school foodservice operations, as measured by temperature, humidity and airborne bacteria concentration in functional areas and further identified their relationships. Data were collected from 26 high school foodservices in Gyeonggi Province. Statistical analyses were conducted with the SPSS program using descriptive analysis and spearman's correlation. The sanitation management performances in high school foodservice scored 86.85 out of 100 points and showed higher scores in the dimensions of preparation and storing management (17.85/20 points), operation management (17.78/20 points), and cooking utensil management (17.62/20 points), while the dimensions of cross contamination management as well as personal hygiene management needed action plans for prompt improvement. The airborne bacteria concentration was highest in the dining area (179.2 CFU/plate), and requiring action plans for improvement. The relative humidity in functional areas ranged from 66.5% in the receiving area to 74.4% (dish-washing area) and the temperature of the preparation area showed an average of $25.1^{\circ}C$ with the highest of $35.4^{\circ}C$ in the dish-washing area. In terms of the relationships among airborne bacteria, temperature, and humidity, the concentration of airborne bacteria was negatively correlated with and temperature in the dish-washing area (r= -0.693, P<0.05), and no other significances were shown in the other areas.