• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.381-389
• /
• 2015

A fully integrated multistandard multiband CMOS mobile TV tuner with small silicon area and low power consumption is proposed for receiving multiple mobile digital TV signals and FM signal. In order to reduce the silicon area of the multistandard multiband receiver, other RF front-end circuits except LNAs are shared and a local oscillator (LO) signal generation architecture with a single VCO for a frequency synthesizer is proposed. To reduce the low frequency noise and the power consumption, a vertical NPN BJT is used in an analog baseband circuits. The RF tuner IC is implemented in a $0.18-{\mu}m$ CMOS technology. The RF tuner IC satisfies all specifications for DVB-H/T, T-DMB, and ISDB-T with a sufficient margin and a successful demonstration has been carried out for DVB-H/T, T-DMB, and ISDB-T with a digital demodulator.

• Journal of Korean Academy of Rural Health Nursing
• /
• v.3 no.1
• /
• pp.44-52
• /
• 2008

Purpose: This research was done to analyze factors influencing satisfaction level with welfare services by elderly people living in a mixed urban and rural area and to identify directions for improvement of service by examining characteristics of the recipients, type and content of services and the correlation between the level of satisfaction and related factors. Method: The 102 elderly people receiving services from 4 institutions in a mixed urban and rural area were selected. The results of the research include the following. Results: First general characteristics of the service-recipients, and the actual condition of the service; Second, correlation between satisfaction level of the recipients and their economic condition, health condition and activities of daily living; Third, analysis of level of satisfaction related to type of services, frequency, time required, desire of the recipients and their attitudes; Fourth, satisfaction and related factors were identified and used to identify possible problems and directions to improve service. Conclusion: The results suggest the following as ways to improve service and to increase the level of satisfaction 1) Individualization of services 2) Improvement in the way of selecting recipients 3) Reinforcement of special training courses for service providers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.177-181
• /
• 2004

It is as research about embodiment of MAC algorithm that is point of wireless LAN technology that is radio skill that is receiving present head of a family footlights, and embodied MAC that is algorithm that control modem Rf and host interface to level that existent common use radio AP and send-receive of high speed are available that embody function that is presented to IEEE 802.11 specs using H/W and S/W. When embody actually, tested module that embody actually using module modem and RF part because test is impossible after have common use product. Also, module that embody actually designed, and is expected to be utilized in radio LAN system construction of high speed late considering CRC and FCS ewer on channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.366-374
• /
• 2009

ITU has considered the 3,400$\sim$4,200 MHz band, which is allocated worldwide on a primary basis to the FSS, as a candidate band for future development of IMT system. In this band, this paper presents the results of the sharing studies performed between FSS and IMT systems through the theoretical and simulation analysis on the interference from multiple IMT base stations into a receiving FSS earth station considering the interference mitigation techniques such as antenna tilt angle and 3 sectors on the IMT base station. By using the long-term and short-term interference threshold, the coordination areas for the FSS earth station are provided to share frequency in 3,400$\sim$4,200 MHz band between FSS earth station and multiple IMT base stations in future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.372-379
• /
• 2014

When a hand-held device with limited battery transmits and receives data using short-range wireless communication systems, such as WLAN(Wireless Local Area Network) or high speed WPAN(Wireless Personal Area Network), instead of mobile communication systems, the device is able to reduce the power consumption due to the reduced transmission distance. However, if there are many WLAN or high speed WPAN systems around the device, non-negligible power may be consumed by receiving and decoding the packets which have nothing to do with the device. In this paper, we propose a scheme reducing the power consumption by including physical-layer ID in WLAN or WPAN packets and avoiding unnecessary packet receptions. Also, we describe a method to determine the optimum number of physical-layer IDs.

• Journal of the Korean Regional Science Association
• /
• v.14 no.1
• /
• pp.91-107
• /
• 1998

Waste disposal problem is one of the most important social welfare indicators in urban area, because the volume of waste generated from urban area is remarkable. So far most waste of Seoul has been disposed at landfills. However, this landifill disposal method is confronted with several difficulties in recent. As public concern on environmental problem increases and autonomy system is settled down, local community people of the landfills refuse to receive the waste produced other places any more. It brought reginal confliction problem between waste sending and receiving by refusing to accept waste from certain region. Furthermore, it is difficult to find another place to fill up the waste, while the existing landfiis is reached at the limit in the near future. In terms of environmental aspects landfill method is not the best way to dispose waste. It contaminates the soil and ground/underground water by leaking water containing many serious pollutants as well as offensive oder. In terms of equity, this waste disposal method is not fair. Environmental pollution causes damage to residence near to the landfills, while the waste produced other places. In order to satisfy the equity aspect, the waste generated a region should be disposed within the region. Incineration of Waste has been provided as the alternative. Government plans to construct waste incinerator in every anatomy, so the waste produced by local community is disposed within their local autonomous area. However, the location decision is not easy, since waste incinerator is one of the facilities to the community people. We can not apply the existing location models for this problem, because they show strong NIMBY phenomenon for the location. The location of waste incinerator should be determined very carefully with consideration of various location factors and criteria. This study proposes a methodology for determining the location of the waste incinerators by utilizing GIS, which is a power research tool for location decision where various geographical factors related. We drive the location factors which should be considered in the determination of waste incinerators. They involve environmental, socio-economic, and institutional factors. In first, we eliminate the area which is located within the environmental location criteria such as slope, fault line, distance to river, and then eliminate ares which is conflict with the social and institutional criteria.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.137-142
• /
• 2018

This paper is studied, as basic research for measuring the accurate fuel amount of the CNG tank by using the transmit-receive ultrasonic sensor, the receiving sensitivity according to changed the pressure inside the tank and the contact surface of the ultrasonic sensor is analyzed. Measurement was carried out while changing the contact surface of the tank and the sensor to three shapes of Point, Line, and Surface and charging the pressure in the tank at an interval of 1 bar from 0 bar to 5 bar. Experiment results, as the pressure in the tank increased the tendency of the received signal value of the ultrasonic sensor to decrease was confirmed. As the contact area between the tank and the sensor increased, the value of the received signal increased, but the noise also increased. The results of experiment, it is judged that accuracy can be improved by changing the contact surface of the sensor.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2923-2930
• /
• 2012

Background: Little is known about interest in faith-based health promotion programs among Asian American populations. Among the Christian denominations, the Seventh-day Adventist (SDA) church is known to place a strong doctrinal emphasis on health. Objectives: To understand appropriate ways to develop and implement health promotion programs and to conduct research among Korean American SDAs. Methods: We collaborated with the North American Division of Korean SDA Churches which sponsors annual week-long religious retreats for their church members. We developed and administered a 10-page questionnaire at their 2009 retreat in order to assess socio-demographic and church characteristics, religiosity, perceived relationship between health and religion, and interest and preferences for church-based health promotion programs. Results: Overall, 223 participants completed our survey (123 in Korean and 100 in English). The sample consisted of regular churchgoers who were involved in a variety of helping activities, and many holding leadership positions in their home churches. The vast majority was interested in receiving health information at church (80%) in the form of seminars, cooking classes and workshops (50-60%). Fewer respondents were interested in support groups (27%). Some interests and preferences differed between English and Korean language groups. Conclusion: Korean American SDA church retreat participants from a large geographic area are very interested in receiving health information and promoting health at their churches and can potentially serve as "agents of influence" in their respective communities.

• Journal of Multimedia Information System
• /
• v.5 no.3
• /
• pp.163-170
• /
• 2018

We developed a multicast communication packet radio protocol using a time-sharing tablet system ("wireless token ring") to achieve the efficient exchange of files among packet radio terminals attached to swans. This paper provides an overview of the system and the protocol of the packet communications. The packet device forming the main part of the transceiver developed is the Texas Instruments CC2500. This device consists of one call-up channel and one data transmission channel and could improve error frame correction using FEC (forward error correction) with 34.8 kbps MSK and receiving power of at least -64 dBm (output 1 dBm at distance of 200 m using 3 dBi antenna). A time-sharing framework was determined for the wireless token ring using call sign ordinals to prevent transmission right loss. Tests using eight stations showed that resend requests with the ARQ (automatic repeat request) system are more frequent for a receiving power supply of -62 dBm or less. A wireless token ring system with fixed transmission times is more effective. This communication protocol is useful in cases in which frequency resources are limited; the energy consumed is not dependent on the transmission environment (preset transmission times); multiple terminals are concentrated in a small area; and information (position data and vital data) is shared among terminals under circumstances in which direct communication between a terminal and the center is not possible. The method allows epidemiological predictions of avian influenza infection routes based on vital data and relationships among individual birds based on the network topology recorded by individual terminals. This communication protocol is also expected to have applications in the formation of multiple in vivo micromachines or terminals that are inserted into living organisms.

• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.187-197
• /
• 2010

The fusion stream of recent broadcasting and communication make multimedia content served in the area of broadcasting into IPTV service which transmits it through high-speed internet, cable TV net and satellite net in realtime. However, as the digital broadcasting service is extended to various media, the security of IPTV service content provided to users by service provider is not fully supported by CAS(Conditional Access System) provided by existing broadcasting system. This paper proposes interactive certification protocol which can efficiently distinguish the receiving-qualification of user between Set-Top Box and Smart Card which are parts of configurations for IPTV system. The proposed protocol uses hash function to make Set-Top Box transmit receiving-qualification about the channel fee which user pays more properly than existing protocol. Also, the proposed protocol uses session key generated between receiver and smart card through inter certification process and encrypts EMM not the service to be used by anyone illegally.