• Journal of the Korean housing association
• /
• v.23 no.5
• /
• pp.61-73
• /
• 2012

This study applied the value of floor-area-ratio standard calculation method to case areas and analyzed them to overcome the limits of previous studies in calculation methods for area standards and land price (value) standard development rights. The results are presented as follows: First, criteria to select sending areas and receiving areas are needed. Second, calculation methods based on the value of floor-area-ratio standard can be widely used as standardized criteria in various areas. Third, for the connection of sending areas with receiving areas, the connections of 1:1, n:1, 1:n, and n:n are available and the location of possible dealing areas should be considered. Also, the choice of connecting unions that meet the purpose of TDR presented by local governments is available. Fourth, for Gwangju, as receiving areas downtown provide higher profits than previous renewal projects, the application of TDR is available. Application methods to overcome problems are presented as follows: First, criteria to select sending and receiving areas should be prepared and implemented in an order of priority. Second, in calculating development rights, methods based on the value of floor-area-ratio standard should be used. Third, the standards and principles of sending and receiving areas should be designated and possible dealing areas should not be limited.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.133-136
• /
• 2000

Generally in the case of mobil communication service for long distance sea, unlike heavily populated residential areas, providers need to minimize the service area per base station. Therefore, in this thesis, the 800 ㎒ CDMA system should be extended to give better long distance communication service. This model is used to predict the occurring receiving power of the mobile stations that we simulated and analyzed. As a result, the experiment demonstrated the appropriateness of predicting receiving power using this model.

• Women's Health Nursing
• /
• v.7 no.4
• /
• pp.642-656
• /
• 2001

The purpose of this study is to find the difference of the climacteric symptoms and quality of life according to hormone replacement therapy (HRT) in climacteric women. The research design was a descriptive survey with questionaries. A convenience sample of 181 climacteric women aged 45-65 who had climacteric symptoms were selected in Kwangju city, Korea. Sixty-six climacteric women among those subjects were receiving HRT at K university hospital in Kwangju city. Data were collected by the interview with questionaries from Feb 3. 1999 to March 25, 1999. Climacteric symptoms were measured using scores developed by Neugarten(1965) and modified by Park(1989), and the quality of life scale related to climacteric symptoms developed by Hildtich(1996) and modified Kim(1998). Data were analyzed by $x^2$-test, t-test, ANOVA and Pearson's correlation procedures, using SAS/win PC+. The results were as follows ; 1. No statistically significant differences were found between the receiving HRT group and not receiving HRT group in demographic, obstetrical and health related characteristics. 2. There were no significant difference on the climacteric symptoms between the group of women receiving HRT (score 2.4) and the group of women who were not (score 2.6) except psychological area (t= 2.407, p= 0.017). 3. The quality of life of the group of women receiving HRT was significantly higher than that the group of women who were not (t=2.151, p=.032). 4. The quality of life of the group of women receiving HRT were high scores There were significantly high of the quality of life in the vaso-motor change area (t=2.634, p= 0.009), psycho-social change area (t=3.239, p=0.001), and physical change area (t=2.031, p=0,043) in the group of receiving HRT compared to not receiving HRT group. 5. The variables showed significantly differences on the degree of climacteric symptoms of the group of women not receiving HRT were the subjective health state (t=15.81, p=0.000), age (t=7.50, p=0.007), feeling of menopause (t=30.88, p=0,000) and climacteric periods (t=8.66, p=0.003), and receiving HRT were number of para (t=3.95, p=0.050) and feeling of menopause (t=3.94, p=0.050). 6. The variables showed significantly difference on the quality of life of the group of women not receiving HRT were the subjective health state (t=4.14, p=0.044) and feeling of menopause (t=10.86, p=0.001). 7. There were significantly positive correlations between the climacteric symptoms and the quality of life in climacteric women (r=0.512, p=0.000).

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.717-722
• /
• 2004

A design was done, and all characteristic of photodetectr of the web pattern type which a standard process of the Bipolar which Si PIN structure was used in this paper, and was used for the current amplifier design was used, and high-speed, was used as receiving optcal area of high altitude, and the module which had a low dark current characteristic was implemented with one chip with a base. Important area decreases an area of Ie at the time of this in order to consider an electrical characteristic and economy than the existing receiving IC, and performance of a product and confidence are got done in incense. First of all, the receiving IC which a spec, pattern of a wafer to he satisfied with the following electrical optical characteristic that produced receiving IC of 5V and structure are determined, and did one-chip is made. On the other hand, the time when AR layer of double is $Si_{3}N_{4}/SiO_{2}=1500/1800$ has an optical reflectivity of less than $10{\%}$ on an incidence optical wavelength of 660 ,and, in case of photo detector which reverse voltage made with 1.8V runs in 1.65V, an error about a change of thickness is very the thickness that can be improved surely. And, as for the optical current characteristic, about 5 times increases had the optical current with 274nA in 55nA when Pc was -27dBm. A BJT process is used, and receiving IC running electricity suitable for low voltage and an optical characteristic in minimum 1.8V with a base with two phases is made with one chip. IC of low voltage operates in 1.8V and 3.0V at the same time, and optical link receiving IC is going to be implemented

• Journal of the Korean Dietetic Association
• /
• v.12 no.3
• /
• pp.264-276
• /
• 2006

The purpose of this study was to propose HACCP system implementation properly and to secure the food safety of school foodservices in Pohang city since the proper facilities and equipment should be key factors in food safety and production. So this study was designed to evaluate existing equipment in food production area, receiving and dining area, and employee facilities. Questionnaire was mailed to 107 school foodservice dietitians in Pohang area and 97 were responded (90.7% response rate). Approximately sixty percent of foodservices were not available separate receiving or polluted area, fifty one percent were installed screen door for insecticidal and temperature and humidity control, and these environmental conditions were hard to keep kitchen dry and sanitary condition. Usually public schools were better equipped than private schools. Forty three percent of school foodservice had initial use of non-foodservice, opened before 1994, and thirty three percent of elementary school foodservice. Among employee facilities, hand washing sanitation stand was prepared seventy nine percent (78.9%) of school foodservices. Dietitians chose outworn equipment and facilities (30.9%), difficulties of maintaining standard temperature and humidity for foodservice (20.6%), lacking separate receiving or polluted area (13.4%), indirect contamination of water hoss (10.3%), and lacking employee facilities (10.3%) as critical points to correct in school foodservice. Therefore governmental regulating agencies must review and approval of plans prior to new construction or extensive remodeling of school foodservice facilities. In addition to these requirement, plan must be set-up step by step to implement HACCP system properly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.474-480
• /
• 2014

In this paper, we propose a study for the next generation terrestrial broadcasting technology based on SFN(Single Frequency Networks), which applies multiple receiving antenna to improve receiving performance of cloud transmission system. By applying multiple receiving antenna, the received broadcast signals at the boundary of different SFN broadcasting area could be modelled by distributed MIMO system. Due to the interference cancellation effect of the MIMO detector, the proposed scheme could suppress the adjacent area interference more efficiently compared to the single receiving antenna case. Simulation results show that receiving performance can be improved dramatically in overlapping area of SFN by applying multiple antenna receivers in cloud transmission system.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.5
• /
• pp.547-556
• /
• 2005

The objective of this study is to obtain adequate intercepting flow during wet weather conditions in combined sewer system. Two study sites are selected under considering different population density, one is developed area with heavy urbanization. Another is recently developing area. In the analysis of field investigation, SS was most significant in initial flushing effects compared with other factors and showed the result with the order of COD, TP, TN. As compared with event mean concentration(EMC) of runoff, BOD, TN and TP showed high concentrations in wide area with relatively large population density. It is by the reason that much pollution load was discharged to receiving water from urbanized area during wet period. According to results of storm-water modeling, 53% of total COD and 52% of total SS pollution load were discharged to receiving water by overflow than intercepting capacity in middle population density site. Also, in the urbanized area, pollution load was discharged to receiving water by 49% of total COD and 77% of total SS. These results can be applied to setup for pollution load flow(budget) generation, collection, treatment and discharging in order to obtain adequate intercepting flow.

• Journal of Biomedical Engineering Research
• /
• v.13 no.3
• /
• pp.201-208
• /
• 1992

In the indirect optical bio-telemetry, high frequency response and low minimum detectable optical power can be achieved by using photodiode with small light receiving area which minimizes junction capacitance. But, on the other hand, S/N ratio becomes low because the optical signal current is small. To solve such a problem, we attach plato-convex lens in front of photo diode, The results of comput- er simulation and experiments suggest promotion of light receiving efficiency and possibility of multi- telemetry system through directivity of convex lens in one room.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.255-261
• /
• 2020

As the accidents of cargo and passenger carrying ships occur, the stress faced by the vessel users is increasing. The risk factors for accident deterioration in remote marine area are stronger than those in road accidents, and therefore the need for safety control is greatly emphasized. To overcome such issue, a lot of effort has been made in terms of conducting research and development of the passengers and freights location tracking system. However, the inner bulkhead structures are made of aluminum/steel which is a difficult material to transfer location information through. This study aims to measure the receiving rate of LoRaWAN signal inside the aluminum/steel bulkhead structures with variation in reception strength and distance. The test was taken place at platforms with 6T and 8T enclosures to reflect the same conditions found in fishery patrol boats. The receiving rate of through-the-wall communication at 10M distance turned out to be 86% in case of using two 6T enclosures, and 73% in case of using one 8T enclosure. The result showed that the receiving rate was more affected by the thickness rather than the number of enclosures.

• Phonetics and Speech Sciences
• /
• v.6 no.2
• /
• pp.89-96
• /
• 2014

This study measured speech intelligibility in relation to the vowel space area and the perception of the listener through acoustic analysis of children who had received cochlear implants. It also provided basic data in the evaluation of speech intelligibility by analyzing the correlation between the vowel space area and speech intelligibility. As a research method, the vowel space area was analyzed by obtaining the value of $F_1$, $F_2$ in children three years after receiving cochlear implants, and compared them to normal children by measuring speech intelligibility through interval scaling. A product-moment correlation analysis was conducted to investigate the correlation. Results showed that the vowel space area of the children who had received cochlear implants was significantly different from that of the normal children, though their speech intelligibility showed similar points to those of the normal children. The results of the correlation analysis on the vowel space area and speech intelligibility showed no significant correlation. Therefore, the period of improving intelligibility after receiving cochlear implants and the objective standards of the vowel space area could be established. In addition, the acoustic rating was required to increase the accuracy of the objective measurement in the evaluation of speech intelligibility.