• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.875-880
• /
• 2018

This paper proposes a novel combined compensation structure in the infrared receiver chip. For the infrared communication chip, the current-voltage (I-V) convert circuit is crucial and important. The circuit is composed by the transimpedance amplifier (TIA) and the combined compensation structures. The TIA converts the incited photons into photocurrent. In order to amplify the photocurrent and avoid the saturation, the TIA uses the combined compensation circuit. This novel compensation structure has the low frequency compensation and high frequency compensation circuit. The low frequency compensation circuit rejects the low frequency photocurrent in the ambient light preventing the saturation. The high frequency compensation circuit raises the high frequency input impedance preserving the sensitivity to the signal of interest. This circuit was implemented in a $0.6{\mu}m$ BiCMOS process. Simulation of the proposed circuit is carried out in the Cadence software, with the 3V power supply, it achieves a low frequency photocurrent rejection and the gain keeps 109dB ranging from 10nA to $300{\mu}A$. The test result fits the simulation and all the results exploit the validity of the circuit.

• 한국음향학회지
• /
• 제16권1호
• /
• pp.67-75
• /
• 1997

본 논문에서는 CDMA 이동국 시스템의 고주파 수신부를 구현하기 위한 시스템 파라메타에 대하여 이동국 최소 규격인 IS-98-A를 기준으로 고찰하였으며, 이 규격을 만족시키기 위한 수신감도와 잡음지수의 관계, 그리고 프레임 오율과 비트 오율과의 관계를 분석하였다. 시뮬레션 결과, 이동국의 수신감도에 적합한 수신기의 최대 잡음지수는 퀄컴사에서 언급하는 규격보다 3dB 정도 여유를 갖는 약 11dB를 나타내었다. 또한 각 부호율에 대한 통화채널의 Eb/Nt와 프레임 오율과의 관계를 통화채널 속도를 가변하여 시험하고, LNA에서 IMD가 가장 중요한 변수라는 사실을 검증하기 위한 상호변조 스퓨리어스에 대한 시험을 LNA를 항상 ON시킨 경우와 ON/OFF시킨 경우 두가지로 나누어 시험하였다.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1151-1158
• /
• 2011

Proximity magnetic sensor is able to detect the object target accurately in close range and it has been widely used in the underwater guided weapon system because there is no countermeasures from the target. In order to increase the damage of target by shock wave due to explosion of the underwater guided weapon system, the maximum detection range of the proximity magnetic sensor needs to be increased. In this paper, we describe the techniques of the optimum transmitting and receiving coils design using the Finite Element Method for the output power enhancement of the transmitter and the sensitivity improvement of the receiver. Finally, the proposed design techniques of the transmitter and the receiver were verified using a experimental setup and a prototype.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.703-705
• /
• 2016

본 논문에서는 광대역 특성을 갖는 이동통신 RF 모듈의 수동 혼변조 왜곡신호를 측정할 수 있는 시스템을 개발하였다. 광대역 특성을 나타내기 위하여 RF 수신단에서 저 잡음 특성과 광대역 특성을 만족하는 수신기를 설계하였으며 RF 수신 단에서 넓은 동적영역(high dynamic range)을 나타내도록 하였다. 설계된 수동 혼변조 왜곡 측정시스템에서 FPGA/DSP를 적용하여 측정된 PIMD신호를 PC에 기록하도록 프로그램 하였다. 650MHz-2700MHz 까지 가변하여 제3차 혼변조 왜곡신호를 측정하여 최고 -138dB를 나타내었다.

• 제어로봇시스템학회논문지
• /
• 제15권6호
• /
• pp.649-654
• /
• 2009

In this paper, an frequency tracking algorithm for weak signal tracking is proposed. The proposed frequency tracking algorithm uses a FMS (Fast Minus Slow) discriminator for frequency error estimation. This frequency tracking algorithm shows good frequency estimation performance under weak signal condition and is a computationally efficient for embedded software GNSS receiver. The software GNSS receiver implementing the proposed weak signal tracking algorithms could track GPS signal down to - 159dBm signal strength in the signal generator test and real GPS signal under dense urban condition.

• 대한전자공학회논문지TC
• /
• 제40권11호
• /
• pp.34-41
• /
• 2003

본 논문에서는 MINT의 0.1㎛ PHEMT MIMIC 공정을 이용하여 제작한 광대역 증폭기와 주파수 혼합기를 사용해서 60㎓ 무선랜 송ㆍ수신 시스템을 설계 제작하였다. RF단 송신기의 출력파워는 0㏈m, 이득은 1.7㏈ 얻었고, 수신기의 노이즈 특성은 4.2㏈, 이득은 1.57㏈를 얻었다. 구현된 시스템은 통신거리 35m이상 거리에서 BER 10/sup -6/ 이하로 통신할 수 있다. 신호의 왜란과 은닉성이 강한 DSSS 방식을 사용하여, 단거리 비밀 통신을 목적으로 개발하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제23권4E호
• /
• pp.120-124
• /
• 2004

A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using a PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF- TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of the focusing transducer with center frequency of approximately 35MHz fabricated in this study showed very wide bandwidth, which could give an axial spatial resolution better than $30{\mu}m$ in B-mode image for biological tissues.

• 센서학회지
• /
• 제18권1호
• /
• pp.22-27
• /
• 2009

The GPS(global positioning system) made up of 28 artificial satellites going round around the earth at a height of 20,000.Km is a system to determine the receiver's location by measuring the distance between the satellite and receivers using an electronic wave. Recently it's been widely used in various applications, such as a navigator, a surveying system, etc. In this paper, we propose a new algorithm to transform coordinates from GPS signals corresponding to various sizes of maps, and the application using this algorithm is also introduced. The algorithm is programmed by MFC on the WinCE 5.0 operating system, and the GPS receiver with a 20 channel high sensitivity and GPS microcontroller chip manufactured by SiRF Technology was used.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.380-389
• /
• 2006

A new laser-based ultrasonic receiver that is based on multi-channel interferometry is shown to be well suited for robust and sensitive detection of ultrasound in industrial environment. The proposed architecture combines random-quadrature detection with detector arrays and parallel multi-speckle processing. The high sensitivity is reached, thanks to the random phase distribution of laser speckle caused by surface roughness. High-density parallel signal processing is achieved by using a simple demodulation technique based on signal rectification. This simple detection scheme is also demonstrated for rejection of the laser intensity noise, making possible the use of lower cost laser without reduction in performances. Results demonstrating this new principle of operation and its performances are presented.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 춘계학술발표대회 논문집 제23권 1호
• /
• pp.311-314
• /
• 2004

A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using the PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF-TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of a center frequency approximately 40MHz focusing transducer fabricated in this study showed very wide bandwidth which could give an axial spatial resolution better than 30um in the B-mode image for biological tissues.